KOHLER K-24916 Wireless Music Kit Owner’s Manual
- July 20, 2024
- Kohler
Table of Contents
KOHLER K-24916 Wireless Music Kit
Specifications:
- Dimensions:
- Height: 5-f5/8″ (143 mm)
- Width: 3-5/8″ (92 mm)
- Depth: 5-1/8″ (130 mm)
- Cord Length: 25′ (7.62 m)
- Material: Aluminum
- Speakers: Includes 2
- Electrical Service:
- 120 V, 15 A, 60 Hz
- Class A Ground-Fault Circuit-Interrupter (GFCI) required
Product Usage Instructions
Installation:
The Wireless Music Kit K-24916 can be retrofitted onto new baths in the field prior to bath installation. Ensure access to components will be available after bath installation. This product is not compatible with baths already installed or integral apron soaking baths without an access panel.
Important Notes:
- Install the product following the provided installation guide.
- Only intended for new bath installations.
- Avoid installing in locations with excessive moisture, high humidity, or condensation.
- Maintain at least 6″ (152 mm) of space around the amplifier for proper airflow.
- Ensure unrestricted service access to the amplifier.
- Place the amplifier near a 15 A 120 V electrical outlet, possibly requiring a GFCI outlet in certain applications.
FAQ
- Q: Is the Wireless Music Kit K-24916 water-resistant?
- A: No, this product is not water-resistant. Avoid installing in areas with excessive moisture or high humidity levels.
- Q: Can I install this on any type of bath?
- A: This kit is designed for new bath installations only and may not be compatible with baths already installed or those without an access panel.
Codes/Standards
- None Applicable
KOHLER® One-Year Limited Warranty
See website for detailed warranty information. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kohler Co. is under license. Other trademarks and trade names are those of their respective owners
Features
- Stream music wirelessly in the bath from a Bluetooth®*- enabled personal device
- Play music in the bathroom while taking a bath or getting ready to go out
- Complete installation package that includes two speakers with wiring, amplifier, adhesive and instructions
- Wireless Music Kit is listed as a recommended accessory or upgrade, both on Kohler.com and on bath specification sheets, for compatible KOHLER rectangle or oval shaped acrylic bath models
- Syncs with devices enabled with BLUETOOTH® wireless technology including smartphones, MP3 players, tablets, and laptops located up to 33 feet away.*
Installation
- Music system utilizes 120V plug
- This accessory is not factory-installed and is designed to be retrofitted onto new baths in the field prior to the bath installation
- Compatibility requirement: This accessory can be installed onto new installations of acrylic baths, as long as access to wireless music kit components will be available after the installation of the bath. This product is not compatible with baths that are already installed, or integral apron taking baths without an access panel
- 120V service
Recommended Products/Accessories
- K-23723 Faucet cleaner
1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 2-28-2024 21:36 – US
Dimension
Required Electrical Service
One circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD). 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Material: Aluminum
- Bluetooth® range: 33 ft (10.1 m)
Notes
Install this product according to the installation guide. This product is intended for new bath installations only.
CAUTION: Risk of product damage. Do not install near heat sources (such as radiators or heat registers) or in any location where the temperature may exceed 104°F (40°C). This product is not water-resistant. Do not install in a location where excessive moisture, high humidity levels, or condensation are present. Provide a minimum of 6″ (152 mm) of space around the amplifier for proper airflow. Provide unrestricted service access to the amplifier. Locate the amplifier within close proximity to a 15 A 120 V electrical outlet. A GFCI outlet may be required in certain applications