KOHLER K-1966-GH Heated Bubble Massage Air Bath Owner’s Manual

July 20, 2024
Kohler

KOHLER K-1966-GH Heated Bubble Massage Air Bath

KOHLER-K-1966-GH-Heated-Bubble-Massage-Air-Bath-
PRODUCT

Specifications

  • Product Model: K-1966-GH
  • Dimensions: 65-1/2 x 35-1/2 inches
  • Electrical Requirements: Blower – 120 V, 15 A, 60 Hz; Heater – 120 V, 15 A, 60 Hz
  • Water Capacity: 72.6 gallons (274.8 liters)
  • Weight: 100 lbs (45.4 kg)
  • Drain Location: Center

FAQ

  • Q: What is the water capacity of the air bath?
    • A: The water capacity is 72.6 gallons (274.8 liters).
  • Q : How should I connect the electrical components?
    • A: Connect the blower to a 120 V, 10 A, 60 Hz circuit and the heater to a 120 V, 5 A, 60 Hz circuit.
  • Q: Can I install a rim-mount faucet on this air bath?
    • A: Yes, you can install a rim-mount faucet, but ensure there is no interference above or below the deck before drilling any holes.

Features

  • 118 to 122 airjets release thousands of heated bubbles that surround and support the body in a warm massage
  • Automatic and manual purge cycles remove residual water from air channels after use
  • Variable-speed blower lets you adjust massage intensity to 18 levels
  • Freestanding design creates a striking focal point in your bathing area
  • 16″ (406 mm) depth offers a deep soaking experience
  • Integral lumbar support on both ends
  • Textured bottom surface
  • Wide ledge on one side is ideal for deck-mount faucet and/or handshower
  • Straight shroud
  • Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
  • Automatic and manual purge cycles remove residual water from air channels after use

Material

  • Acrylic

Technology

  • Auto-shutoff timer on blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off
  • User interface: electronic keypad control

Installation

  • Center drain
  • Freestanding
  • PureFlo drains are not recommended for a deck-mount faucet installation
  • Remote blower motor installation required (relocation kit is included)

Products/Accessories

Required Products/Accessories

  • K-T37391 Rotary-turn bath drain trim
  • K-T37392 Rotary-turn bath drain trim
  • K-78438 30″ cable bath drain

Recommended Products/Accessories

  • K-7265 Brass toe tap bath drain
  • K-23726 Drain treatment
  • K-23732 Tub & shower cleaner

Codes/Standards

  • ASME A112.19.7/CSA B45.10
  • CSA B45.5/IAPMO Z124
  • ASTM E162
  • ASTM E662
  • UL 1795
  • CSA C22.2 No. 218.2
  • IAPMO Certification
  • cUL Listed
  • UL Listed

Limited Warranty

  • KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER® Hydrotherapy Components Five-Year Limited Warranty
  • See website for detailed warranty information.

Available Colors/Finishes

Color tiles intended for reference only.

Dimensions

No change in measurements if connected with drain illustrated. (K-37386)
Recommended Faucet Location

KOHLER-K-1966-GH-Heated-Bubble-Massage-Air-Bath-FIG-1

Required Electrical Service

Two dedicated circuits required, protected with Class A Ground- Fault Circuit- Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).

  • Blower: 120 V, 15 A, 60 Hz
  • Heater: 120 V, 15 A, 60 Hz

Technical Information

All product dimensions are nominal.

  • Drain location: Center
  • Basin area, bottom: 45-3/4″ x 24-7/8″ (1162 mm x 632 mm)
  • Basin area, top: 54-7/8″ x 29-3/16″ (1394 mm x 741 mm)
  • Weight: 100 lbs (45.4 kg)
  • Minimum floor load: 40.4 lbs/ft² (197.3 kg/m²)
  • Water depth: 15-3/4″ (400 mm)
  • Water capacity: 72.6 gal (274.8 L)
  • Template: Footprint, 1245666, not required, not included
  • Electrical component rating:
    • Blower: 120 V, 10 A, 60 Hz
    • Heater: 120 V, 5 A, 60 Hz

Notes

  • Measure your actual product for rough-in details.
  • Install this product according to the installation instructions.
  • The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
  • This bath is designed for freestanding installation only.
  • If installing a rim-mount faucet, make sure there is no interference above or below the deck before drilling any holes.

Contact

  • 1-800-4KOHLER (1-800-456-4537)
  • Kohler Co. reserves the right to make revisions without notice to product specifications.
  • For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 2-28-2024 21:34 – US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals