KOHLER K-1949-XGHRA Alcove Heated Bubble Massage Air Bath and Whirlpool Owner’s Manual
- July 20, 2024
- Kohler
Table of Contents
KOHLER K-1949-XGHRA Alcove Heated Bubble Massage Air Bath and Whirlpool
Specifications
- Product Model : K-1949-XGHRA
- Dimensions: 66 x 32 inches
- Drain Location : Right
- Water Depth : 15-5/16 inches
- Water Capacity : 66 gallons
- Electrical Component Ratings:
- Pump: 120 V, 7 A, 60 Hz
- Heater: 120 V, 5 A, 60 Hz
- Blower: 120 V, 15 A, 60 Hz
Product Usage Instructions
Installation Ensure proper electrical service with dedicated circuits protected by a Ground-Fault circuit interrupter (GFCI).Measure and confirm rough-in dimensions before installation.
Maintenance Refer to the detailed warranty information on the website for maintenance guidelines.
Hydrotherapy Experience Enjoy the BubbleMassageTM experience for up to 60 minutes before turning off.
Cleaning and Care Use recommended products like drain treatment and tub & shower cleaner for cleaning.
FAQ
- Q: What are the required electrical specifications for the product?
- A: The pump, heater, and blower require 120V at different amperages as specified in the manual.
- Q: Is the product ADA-compliant?
- A: Yes, the product is ADA-compliant when installed according to specific regulations.
- Q: What is the water capacity of the product?
- A: The product has a water capacity of 66 gallons.
- Q: Can the blower be relocated?
- A: Yes, a remote blower installation kit is available for relocating the blower.
Features
- 118 airjets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust Heated BubbleMassage™ massage intensity to 18 levels
- Single-speed whirlpool revitalizes sore muscles
- 8 fully adjustable whirlpool jets allow users to customize hydromassage flow and direction at each jet
- Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Integral apron
- Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
- Textured bottom surface
- Coordinates with other products in the Archer collection
- Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
- Acrylic
Hydrotherapy
- Whirlpool
Technology
- The auto-shutoff timer on the blower allows users to enjoy the Heated BubbleMassage™ experience for 60 minutes before turning off
- User interface: electronic keypad control for Heated
BubbleMassage™; air switch actuator for whirlpool
Installation
- Right drain
Required Products/Accessories
-
K-7271 Brass Slotted Overflow Bath Drain
or -
K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
- K-1446 Remote Installation Kit
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
ADA
Codes/Standards
- ASME A112.19.7/CSA B45.10
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- UL 1795
- CSA C22.2 No. 218.2
- ADA
- ICC/ANSI A117.1
- IAPMO Certification
- UL Listed
KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER® Hydrotherapy Components Five-Year Limited
Warranty
See the website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only
Archer®
66″ x 32″ alcove Heated BubbleMassage™ air bath and whirlpool, right drain K-1949-XGHRA
DIMENSIONS
Required Electrical Service
Three dedicated circuits required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).
- Pump, Heater : 120 V, 15 A, 60 Hz
- Heater: 120 V, 15 A, 60 Hz
- Blower: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Drain location : Right
- Basin area, bottom: 50-3/8″ x 19-5/8″ (1280 mm x 498 mm)
- Basin area, top : 57-5/16″ x 24-1/16″ (1456 mm x 611 mm)
- Weight : 165 lbs (74.8 kg)
- Minimum floor load : 50 lbs/ft² (244.1 kg/m²)
- Water depth : 15-5/16″ (389 mm)
- Water capacity : 66 gal (249.8 L)
- Electrical component
- rating:
- Pump: 120 V, 7 A, 60 Hz
- Heater: 120 V, 5 A, 60 Hz
Notes
Measure your actual product for rough-in details. Install this product
according to the installation instructions.
The hot water supply should be 70% of the capacity of the bath or greater.
Installations will vary.
A remote blower installation kit is available for relocating the blower.
Provide access for servicing the blower.
Do not relocate or alter the PVC tee or coiled flexible tubing connected to
the blower. Follow the blower relocation instructions exactly. ADA compliant
when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada
2-28-2024 20:41 – US