KOHLER K-23732 Single Threshold Rear Center Owner’s Manual
- July 20, 2024
- Kohler
Table of Contents
KOHLER K-23732 Single Threshold Rear Center
Specifications
- Product: 48 x 48 Single-threshold rear center K-9998
- Dimensions:
- 48 x 48 inches (1219 x 1219 mm)
- Flange Detail: 43-1/8 inches (1095 mm)
- Weight: 66 lbs (29.9 kg)
- Drain Location: Center
Product Information
This product is a 48 x 48 Single-threshold rear center shower base K-9998 designed for use in shower installations. It features a groove teak drain cover (sold separately) and requires the K-9332 Drain Cover.
Required Products/Accessories
– K-9332 Drain Cover
Recommended Products/Accessories
- K-9132 Shower Drain
- K-706008-D3 Frameless Sliding Shower Door
- K-706008-L Frameless Sliding Shower Door
- K-706014-D3 Frameless Sliding Shower Door
- K-706014-L Frameless Sliding Shower Door
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
Codes/Standards
CSA B45.5/IAPMO Z124, ASTM E162, ASTM E662, IAPMO Certification
Technical Information
All product dimensions are nominal.
Product Usage Instructions
Installation
- Measure your actual product for rough-in details.
- Install the product according to the provided installation instructions.
- Shimming may be required to level the fixture.
- Shimming may be required between the stud frame and the fixture.
- Stud opening tolerance is +1/4 inch (6 mm), -0 inch (0mm).
FAQ
- Q: Where can I find detailed warranty information?
- A: Please visit the Kohler website for detailed warranty information or contact 1-800-4KOHLER (1-800-456-4537).
- Q: What should I do if shimming is required during installation?
- A: If shimming is needed to level the fixture or between the stud frame and the fixture, ensure to use appropriate shims to achieve a stable and secure installation.
Features
- Low-threshold design for easy entry and exit
- Recessed rear drain
- Single threshold for three-wall installation
- Requires K-9332 Groove aluminum drain cover or K-9336 Groove teak drain cover (sold separately)
Material
- Acrylic
Required Products/Accessories
- K-9332 Drain Cover
Recommended Products/Accessories
-
K-9132 Shower Drain
-
K-706008-D3 Frameless Sliding Shower Door
-
K-706008-L Frameless Sliding Shower Door
K-706014-D3 Frameless Sliding Shower Door -
K-706014-L Frameless Sliding Shower Door
-
K-23726 Drain treatment
-
K-23732 Tub & shower cleaner
Codes/Standards
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- IAPMO Certification
KOHLER® Plastic Baths and Receptors Lifetime Limited Warranty
See the website for detailed warranty information.
Dimension
Technical Information
All product dimensions are nominal.
- Drain location: Center
- Weight: 66 lbs (29.9 kg)
- Minimum floor load: 20 lbs/ft² (97.6 kg/m²)
Notes
Measure your actual product for rough-in details. Install this product according to the installation instructions. Shimming may be required to level the fixture. Shimming may be required between the stud frame and the fixture. Stud opening tolerance is + 1/4″ (6 mm), – 0″ (0 mm).
- 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 2-28-2024 22:13 – US