KOHLER K-1122-GHRA Heated Bubble Massage Air Bath Owner’s Manual
- July 20, 2024
- Kohler
Table of Contents
KOHLER K-1122-GHRA Heated Bubble Massage Air Bath
FAQ
- Q: What are the available colors/finishes for the product?
- A: The available colors/finishes include White, Biscuit, NY Dune, IceTM Grey, ThunderTM Grey, and Black BlackTM.
- Q: What are the codes/standards the product complies with?
- A: The product complies with ASME A112.19.7/CSA B45.10, CSA B45.5/IAPMO Z124, ASTM E162, ASTM E662, UL 1795, CSA C22.2 No. 218.2, IAPMO Certification, cUL Listed, and UL Listed standards.
Features
- 120 airjets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust massage intensity to 18 levels
- Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Integral apron
- Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
- Textured bottom surface
- Coordinates with other products in the Archer collection
- Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
- Acrylic
Technology
- Auto-shutoff timer on blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off
- User interface: electronic keypad control
Installation
- Right drain
- Alcove
Products/Accessories
Required Products/Accessories
- K-7271 Brass Slotted Overflow Bath Drain
- K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
- K-1446 Remote Installation Kit
- K-1491 Bath/Whirlpool Pillow
- K-1601 Bath/whirlpool footstop, removable
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31797 Slotted overflow bath drain kit
- K-31795 Slotted overflow above-the-floor bath drain kit
Codes/Standards
- ASME A112.19.7/CSA B45.10
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- UL 1795
- CSA C22.2 No. 218.2
- IAPMO Certification
- cUL Listed
- UL Listed
Limited Warranty
- KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER® Hydrotherapy Components Five-Year Limited Warranty
- See website for detailed warranty information.
Colors/Finishes
Available Colors/Finishes
Color tiles intended for reference only.
Dimensions Specifications
Required Electrical Service
Two dedicated circuits required, protected with Class A Ground- Fault Circuit- Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).
- Blower: 120 V, 15 A, 60 Hz
- Heater: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Drain location: Right
- Basin area, bottom: 45-1/8″ x 19-11/16″ (1146 mm x 500 mm)
- Basin area, top: 52-3/4″ x 25-5/16″ (1340 mm x 643 mm)
- Weight: 100 lbs (45.4 kg)
- Minimum floor load: 46 lbs/ft² (224.6 kg/m²)
- Water depth: 15″ (381 mm)
- Water capacity: 58 gal (219.6 L)
- Electrical component rating:
- Blower: 120 V, 10 A, 60 Hz
- Heater: 120 V, 5 A, 60 Hz, 620 W
- Minimum flat for door: 2-9/16″ (65 mm)
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- Remote blower installation kit is available for relocating the blower. Provide access for servicing the blower.
- Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly.
Contact
- 1-800-4KOHLER (1-800-456-4537)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 2-28-2024 22:54 – US
Read User Manual Online (PDF format)
Loading......