KOHLER K-1122-XHGH Heated Bubble Massage Air Bath Owner’s Manual

KOHLER K-1122-XHGH Heated Bubble Massage Air Bath

Product Usage Instructions

Installation:

• This product is designed for drop-in installation only. Ensure three dedicated circuits are available and protected with a Class A Ground-Fault Circuit-Interrupter (GFCI). Install according to provided installation instructions.

Hydrotherapy Experience:

• Enjoy the BubbleMassageTM experience for up to 60 minutes before turning it off. Adjust massage intensity to one of the 18 levels available.

Maintenance:

• Use recommended products/accessories like drain treatment and tub & shower cleaner for optimal performance. Do not relocate or alter PVC tee or tubing connected to the blower.

FAQ

• Q: Can I install this product in a three-wall alcove with an overhead shower?
  • A: No, this product is designed for drop-in installation only and not suited for use in a three-wall alcove with an overhead shower.
• Q: What electrical service is required for the pump, heater, and blower?
  • A: The pump, heater, and blower require 120 V, 15 A, 60 Hz electrical service each. Ensure three dedicated circuits are available and protected with a Class A Ground-Fault Circuit-Interrupter (GFCI).
• Q: How long should I enjoy the BubbleMassageTM experience?
  • A: You can enjoy the BubbleMassageTM experience for up to 60 minutes before turning it off.

Features

• 118 airjets release thousands of heated bubbles that surround and support the body in a warm massage
• Automatic and manual purge cycles remove residual water from air channels after use
• Variable-speed blower lets you adjust Heated BubbleMassage™ massage intensity to 18 levels
• Single-speed whirlpool revitalizes sore muscles
• 8 fully adjustable whirlpool jets allow users to customize hydromassage flow and direction at each jet
• Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
• Integral lumbar support
• Slotted overflow allows for deep soaking
• Textured bottom surface
• Coordinates with other products in the Archer collection
• Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
• Automatic and manual purge cycles remove residual water from air channels after use

Material

• Acrylic

Hydrotherapy

• Whirlpool

Technology

•  Auto-shutoff timer on blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off
• User interface: electronic keypad control for Heated BubbleMassage™; air switch actuator for whirlpool

Installation

• Reversible drain

Products/Accessories

Required Products/Accessories

• K-7271 Brass Slotted Overflow Bath Drain
• K-7272 PVC Slotted Overflow Bath Drain

Recommended Products/Accessories

• K-1446 Remote Installation Kit
• K-23726 Drain treatment
• K-23732 Tub & shower cleaner
• K-31797 Slotted overflow bath drain kit
• K-31795 Slotted overflow above-the-floor bath drain kit

Codes/Standards

Codes/Standards

• ASME A112.19.7/CSA B45.10
• CSA B45.5/IAPMO Z124
• ASTM E162
• ASTM E662
• UL 1795
• CSA C22.2 No. 218.2
• ADA
• ICC/ANSI A117.1
• IAPMO Certification
• cUL Listed
• UL Listed

Limited Warranty

• KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER® Hydrotherapy Components Five-Year Limited Warranty
• See website for detailed warranty information.

Colors/Finishes

Available Colors/Finishes

Color tiles intended for reference only.

Dimensions Specifications

Required Electrical Service

Three dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).

• Pump, Heater: 120 V, 15 A, 60 Hz
• Heater: 120 V, 15 A, 60 Hz
• Blower: 120 V, 15 A, 60 Hz

Technical Information

All product dimensions are nominal.

• Drain location: Reversible
• Basin area, bottom: 45-1/8″ x 19-11/16″ (1146 mm x 500 mm)
• Basin area, top: 52-3/4″ x 25-5/16″ (1340 mm x 643 mm)
• Weight: 160 lbs (72.6 kg)
• Minimum floor load: 47.5 lbs/ft² (231.9 kg/m²)
• Water depth: 15″ (381 mm)
• Water capacity: 58 gal (219.6 L)
• Cutout: Drop-in, 58-1/2″ x 30-1/2″ (1486 mm x 775 mm)
• Electrical component rating:
• Pump: 120 V, 7 A, 60 Hz
• Heater: 120 V, 5 A, 60 Hz

Notes

• Measure your actual product for rough-in details.
• Install this product according to the installation instructions.
• The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
• This product is designed for drop-in installation only. It is not suited for use in a three-wall alcove with an overhead shower.
• Remote blower installation kit is available for relocating the blower. Provide access for servicing the blower.
• Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly.
• ADA compliant when installed to the specific requirements of these regulations.

Contact

• 1-800-4KOHLER (1-800-456-4537)
• Kohler Co. reserves the right to make revisions without notice to product specifications.
• For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 2-28-2024 22:15 – US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>