KOHLER K-14037 Freestanding Bath Owner’s Manual
- July 21, 2024
- Kohler
Table of Contents
KOHLER K-14037 Freestanding Bath
Specifications
- Model : 72 x 36 freestanding bath K-14037
- Material : [Material information not provided]
- Weight : 100 lbs (45.4 kg)
- Water Depth : 16-1/2″ (419 mm)
- Water Capacity : 71 gal (268.8 L)
- Drain Location : Center
- Basin Area , Bottom : 46-3/4 x 21-5/8 (1187 mm x 549 mm)
- Basin Area , Top : 69-15/16 x 34-3/8 (1776 mm x 873 mm)
- Template : Footprint, 1055345-7, required, included
Product Usage Instructions
Installation
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions provided.
- Ensure the hot water supply is at least 70% of the capacity of the bath.
- Installations may vary; seek professional assistance if needed.
- Center drain
- Freestanding
Maintenance and Care
- Regularly clean the bath using recommended products such as K-23732 Tub & Shower Cleaner.
- Use drain treatment products like K-23726 to maintain proper drainage.
Recommended Products/Accessories
- K-922 Wall- or -ceiling-mount bath filler
- K-923 Wall- or -ceiling-mount bath filler
- K-1601 Bath/whirlpool footstep, removable
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
Features
- The generous length provides a spacious bathing area
- Integral lumbar support
- Coordinates with other products in the Escale collection
Material
Acrylic
Codes/Standards
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- IAPMO Certification
KOHLER® Plastic Baths and Receptors Lifetime Limited Warranty See the website for detailed warranty information.
DIMENSION
Technical Information
All product dimensions are nominal.
- Drain location: Center
- Basin area, bottom: 46-3/4″ x 21-5/8″ (1187 mm x 549 mm)
- Basin area, top: 69-15/16″ x 34-3/8″ (1776 mm x 873 mm)
- Weight: 100 lbs (45.4 kg)
- Minimum floor load: 43 lbs/ft² (209.9 kg/m²)
- Water depth: 16-1/2″ (419 mm)
- Water capacity: 71 gal (268.8 L)
- Template: Footprint, 1055345-7, required, included
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications. For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 2-28-2024 21:38 – US
FAQ
Q: What is the weight capacity of the bath?
A: The weight capacity of the bath is 100 lbs (45.4 kg).
Q: What is the water depth of the bath?
A: The water depth of the bath is 16-1/2″ (419 mm).
Q: How much water does the bath hold?
A: The bath has a water capacity of 71 gallons (268.8 liters).