KOHLER K-1947-XGHLA 60 x 30 Inch Alcove Heated Bubble Massage Air Bath Owner’s Manual
- July 21, 2024
- Kohler
Table of Contents
- KOHLER K-1947-XGHLA 60 x 30 Inch Alcove Heated Bubble Massage Air Bath
- Specifications
- Product Usage Instructions
- Features
- Technology
- Installation
- Warranty
- DIMENSION
- Required Electrical Service
- Technical Information
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KOHLER K-1947-XGHLA 60 x 30 Inch Alcove Heated Bubble Massage Air Bath
Specifications
- Drain Location: Left
- Basin Area, Bottom: 45-1/8 x 19-11/16 (1146 mm x 500 mm)
- Basin Area, Top : 52-1/8 x 22-1/16 (1324 mm x 560 mm)
- Weight : 110 lbs (49.9 kg)
- Water Depth: 15-1/8 (384 mm)
- Water Capacity: 57 gal (215.8 L)
- Electrical Component Ratings:
- Pump : 120 V, 7 A, 60 Hz
- Heater : 120 V, 5 A, 60 Hz
- Blower : 120 V, 15 A, 60 Hz
Product Usage Instructions
Installation
Ensure that the product is installed according to the provided installation
instructions. Three dedicated circuits are required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Verify the required electrical
service for the pump, heater, and blower. Follow the specified measurements
for rough-in and provide access for servicing the blower.
Usage
- Fill the bath with water to the desired level.
- Turn on the BubbleMassageTM feature and adjust the massage intensity to your preference using the air switch actuator.
- Enjoy a relaxing BubbleMassageTM experience for up to 60 minutes before turning off.
Maintenance
Regularly clean the product following the provided maintenance instructions to
ensure optimal performance and longevity.
Features
- 118 airjets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust Heated BubbleMassage™ massage intensity to 18 levels
- Single-speed whirlpool revitalizes sore muscles
- 8 fully adjustable whirlpool jets allow users to customize hydromassage flow and direction at each jet
- Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Integral apron
- Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
- Textured bottom surface
- Coordinates with other products in the Archer collection
- Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
Acrylic
Hydrotherapy
Whirlpool
Technology
- The auto-shutoff timer on the blower allows users to enjoy the Heated BubbleMassage™ experience for 60 minutes before turning off
- User interface: electronic keypad control for Heated BubbleMassage™; air switch actuator for whirlpool
Installation
- Left drain
- Alcove
- Remote blower motor installation required (relocation kit is included)
Required Products/Accessories
- K-7271 Brass Slotted Overflow Bath Drain or
- K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
- Codes/Standards
- ASME A112.19.7/CSA B45.10
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- UL 1795
- CSA C22.2 No. 218.2
- ADA
- ICC/ANSI A117.1
- IAPMO Certification
- cUL Listed
- UL Listed
KOHLER® Plastic Baths and Shower Bases Lifetime Limited Warranty KOHLER® HydrotherapyComponents Five-Year Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only
DIMENSION
Required Electrical Service
Three dedicated circuits required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).
- Pump, Heater: 120 V, 15 A, 60 Hz
- Heater: 120 V, 15 A, 60 Hz
- Blower: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Drain location : Left
- Basin area, bottom: 45-1/8″ x 19-11/16″ (1146 mm x 500 mm)
- Basin area , top : 52-1/8″ x 22-1/16″ (1324 mm x 560 mm)
- Weight : 110 lbs (49.9 kg)
- Minimum floor load : 48 lbs/ft² (234.4 kg/m²)
- Water depth: 15-1/8″ (384 mm)
- Water capacity: 57 gal (215.8 L)
Electrical component rating:
- Pump : 120 V, 7 A, 60 Hz
- Heater : 120 V, 5 A, 60 Hz
- Heater : 120 V, 12 A, 60 Hz
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- A remote blower installation kit is available for relocating the blower. Provide access for servicing the blower.
- Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly.
- ADA-compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications. For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 2-28-2024 21:10 – US
FAQ
Q: What is the electrical component rating for the pump?
A: The electrical component rating for the pump is 120 V, 7 A, 60 Hz.
Q: How much water does the product hold?
A: The product has a water capacity of 57 gallons (215.8 L).