KOHLER K-1968 Drop in Bath Owner’s Manual
- July 21, 2024
- Kohler
Table of Contents
KOHLER K-1968 Drop in Bath
Specifications
- Material: Not specified
- Weight: 110 lbs (49.9 kg)
- Water Depth: 27-1/2″ (699 mm)
- Water Capacity: 171 gal (647.3 L)
- Drain Location: Center
- Basin Area, Bottom: 39-3/8″ x 39-3/8″ (1000 mm x 1000 mm)
- Basin Area, Top: 44-5/8″ x 44-5/8″ (1133 mm x 1133 mm)
Product Usage Instructions
- Measure your actual product for rough-in details.
- Install the product according to the provided installation instructions.
- Ensure the hot water supply is at least 70% of the bath’s capacity.
- For under-mount installations, use the required kit (sold separately).
- No change in measurement if connected with the drain illustrated (K-8150).
- Template for under-mount: K-578 (required, not included).
FAQ
- Q: What is the water capacity of the product?
- A: The water capacity is 171 gallons (647.3 liters).
- Q: What are the dimensions of the basin area?
- A: The bottom basin area is 39-3/8″ x 39-3/8″ (1000 mm x 1000 mm), and the top basin area is 44-5/8″ x 44-5/8″ (1133 mm x 1133 mm).
- Q: How should I install the product?
- A: Follow the provided installation instructions and ensure the hot water supply is sufficient.
Features
- Spacious design accommodates up to two bathers
- Two raised corner seats
- Extra-deep bathing well for added comfort
Material
- Acrylic
Installation
- Center drain
- Undermount
- Drop-in or undermount
Recommended Products/Accessories
- K-1177 Vinyl Tiling-in Bead
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
Codes/Standards
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- IAPMO Certification
KOHLER® Plastic Baths and Receptors Lifetime Limited Warranty
- See the website for detailed warranty information.
Dimension
Technical Information
- All product dimensions are nominal.
- Drain location: Center
- Basin area, bottom: 39-3/8″ x 39-3/8″ (1000 mm x 1000 mm)
- Basin area, top: 44-5/8″ x 44-5/8″ (1133 mm x 1133 mm)
- Weight: 110 lbs (49.9 kg)
- Minimum floor load: 105 lbs/ft² (512.7 kg/m²)
- Water depth: 27-1/2″ (699 mm)
- Water capacity: 171 gal (647.3 L)
- Cutout: Drop-in, 47″ x 47″ (1194 mm x 1194 mm)
- Template: Under-mount, K-578, required, not included
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- Kit is required for under-mount installations (sold separately).
CONTACT
- 1-800-4KOHLER (1-800-456-4537)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada
- 2-28-2024 20:47 – US
References
Read User Manual Online (PDF format)
Loading......