Shentesi Y26 Bluetooth Wireless Headphones Instructions

Shentesi Y26 Bluetooth Wireless

Product Specifications

Bluetooth version: Bluetooth V5.3
Connection model : TWS
Battery specification: Headset 3.7V/30mAh; Charging box 3.7V/150mAh
Support mode: HFP/HSP/ A2DP/AVRCP
Sensitivity: 105dB ± 3dB S.P. Lat 1KHz
Transmission distance: 10 meters(in an ideal environment without any major obstacles)
Play time: About 2.5 hours
Call time: About 3 hours
Standby time : About 80 hours
Charging time: Charge the charging compartment for about 1.5 hours, and charge the headset for about 1 hour
Charging box to charge the headset : About 2.5 times

Functional operation instructions

1. Boot
   Take the headset out of the charging compartment and automatically turn it on or press and hold the left and right headset multifunction button for 3 seconds

2. Shut down
   Put the headset into the charging compartment and turn it off automatically.
   Press and hold the left and right headset multifunction button for 5 seconds to shut down

3. Boot back：
   When the pairing is successful , the Bluetooth headset preferentially enters the connected state when the second time is turned on , and automatically connects back to the connected mobile phone

4. Play/Pause
   In the standby state , click the left and right earphone multi-function keys to directly play music , and click the left and right earphone multi- function keys during playback to pause the playback.

5. Switch songs
   When playing music , three-click the left and right earphone multi-function keys to switch between up and down music.

6. Volume addition and subtraction
   Double-click the left and right earphone multi-function keys to increase or decrease the volume

7. Call answering
   When the mobile phone calls, click the left and right earphones multifunction button to answer the call

8. Call hang up
   When the phone is talking, click the left and right earphones multifunction button to hang up the phone

9. Call rejection
   When the mobile phone calls, long press the left and right headphones multi- function button for 2 seconds to reject the call

10. Start voice assistant
    Long press the headset multi-function button for 1.5 seconds to start Siri or Google voice assistant for voice control of mobile phone operations.

Pairing method

1. Take it out of the charging compartment or press and hold the left and right earphone multi-function buttons for 3 seconds to turn on the phone, Automatic pairing
2. Start the Bluetooth function of the mobile phone or other device , click to enter the pairing
3. The two earphones can also be paired with the mobile phone separately, and the operation method can be pressed step 2 Operation method to operate.

Charging operation

1. Plug one end of the Micro USB charging cable into the USB port of the charging box and the other end of the charger to charge the charging box. When the power of the charging box is within the indication range of the corresponding indicator light , the blue indicator light at this position will be separated by 2 seconds. Flashes once, until the indicator’s power range is fully charged, it will stay on. The indicator light that enters the next power range will blink, and all indicators will stay on when fully charged .
2. Charge the earphones: Put the earphones into the charging compartment to automatically charge . The earphone indicator will be red when charging, and it will go out after fully charged ; the blue indicator light in the charging compartment will be on ( when the charging compartment is fully charged, 4 battery indicator lights ) All lights are on , when the charge level of the charging compartment drops to the corresponding level, the corresponding.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>