anko 43412235 Texture Canvas Art Kit Instruction Manual
- July 20, 2024
- Anko
Table of Contents
anko 43412235 Texture Canvas Art Kit
Kit Includes
- 2 x stretched canvases
- 5 x acrylic paints
- 2 x modeling pastes
- 1 x paint palette
- 2 x plastic knives
- 2 x paint brushes
- 1 x plastic scraper
- 1 x instruction sheet
Tips
- Acrylic paints and modeling paste should be well mixed and blended.
- Wait for the first coat of base color to dry before adding more paint.
- The mixture needs to be adjusted with the back of the plastic knife to get a full and complete shape.
- Do not handle completed artwork until completely dry
- Wearing gloves is recommended.
How To Make
How To Make A Floral Texture Canvas
- Paint the base color and allow it to dry.
- Mix the modeling paste chosen with your desired acrylic paint colors and mix until blended. Add more paint to brighten colors, or more modeling paste to lighten colors.
- Take some modeling paste mixture onto a flat surface and mix.
- Form a shape and scoop the mixture onto the back of the palette knife ready to apply to the artwork.
- Apply the modeling paste to the canvas and gently press down and slide away, to make an indent in the form and make a petal or leaf shape.
- Cover the canvas with a variety of petal and leaf colors. Wait 24 hours after completion to dry and display your artwork.
How To Make A Palm Tree Texture Canvas
- Squeeze out the modeling paste and use the flat edge of the plastic scraper to apply it evenly and thickly over the whole canvas.
- Clean the scraper with warm water.
- Use the textured edge of the plastic scraper to make texture lines from top to bottom of the canvas.
- Make an arch with the plastic scraper using the flat edge, then wait 24 hours for the modeling paste to dry.
- Use the paintbrush and acrylic paint to paint the arch.
- Use the back of the rounded palette knife to adjust and shape the modeling paste on a fia surface.
- Scoop the reshaped modeling paste onto the canvas gently press it down and spread it into a leaf shape. Make all palm leaves base shapes. Add modeling paste to make the trunk.
- Use the side of the palette knife to scrope the texture of the leaves and trunk.
- Wait 24 hours after completion to dry and display your artwork.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>