VANTRUE JS1 Car Jump Starter User Manual

: July 20, 2024
: VANTRUE

Table of Contents

Warning
What’s in the box?
Basic Operation
FAQ and Troubleshooting
Specifications
Warranty & Support
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VANTRUE JS1 Car Jump Starter

VANTRUE JS1 Car Jump Starter

Warning

Please read the instructions carefully before using this unit.
Do not use it as a substitute for car battery.
Do not use it as a toy.
To reduce the risk of injury, close supervision is necessary when the product is used near children.
The product is used to start 12V vehicles. It may be dangerous if used for other starts.
Please use the battery clamp provided with the product. When the battery clamp or wire is damaged, please stop using it to avoid personal injury such as fire, electric shock, etc.
Do not clamp the positive and negative terminals of the battery.
Before starting, ensure that there is no rust or foreign matter attached to the interface, and tightly connect the host and battery clamp to avoid interface connection problems affecting the starting performance of the product.
After successfully starting the car, please remove the product from the car battery within 30 seconds, otherwise it may cause damage.
Do not start more than 3 times in a row. Otherwise, it will cause the product to overheat and damage the product. When starting multiple times, there must be two minutes between each start.
Do not use the clip to power other devices.
Do not place the product in an environment with a temperature exceeding 60℃.
Please charge at room temperature between 0℃ and 45℃.
Do not place the product in water or other humid environments.
Do not expose the product to extreme heat or fire.
Do not operate the product in an explosive environment, such as flammable liquids, gases, or dust.
Before using the product, take off any metal jewelry you are wearing, such as rings, bracelets, and necklaces.
To reduce the risk of product damage, please disconnect the battery clamp from the main unit first, and then remove the battery clamp from the battery after use.
Do not use damaged or modified battery packs.
Damaged or modified battery cells may have unpredictable consequences, leading to risks of fire, explosion, injury, etc.
Please use the charger supplied with the machine or the same specification as the input terminal of the host for charging.
It is not allowed to charge this product immediately after starting the car with this product.
Do not start the car while charging the main unit.
If leakage is found in the product, do not touch the leakage directly with your hands or skin.
If accidentally touched, rinse immediately with soap and water. If it accidentally gets into your eyes, flush your eyes with cold water for at least 10 minutes and seek medical attention immediately.
Based on the characteristics of lithium battery products, please dispose of them by local regulations at the end of the product’s life.

What’s in the box?

A. JS1 Car Jump Starter
What’s In The Box

B. Jump Starter Clamp
What’s In The Box

C. 30W Adapter

D. USB-C Cable
What’s In The Box

E. Storage Bag
What’s In The Box

F. User Manual
What’s In The Box

Basic Operation

Car Jump Starter Overview

Jump Stater Socket
LCD
Power Button & Light
Boost Button
Type C Input(Output) Port
5V 2.4A Output Port Adjustment Button
USB 5V/9V/12V Output Port
DC 15V 10A Output Port
LED Light

LED screen display instructions

Battery Percentage
START
STOP
Reverse Alarm
DC Output
USB-C Input/ Output
USB-A Output

Note:
The car icon is green and always on, indicating that it can ignite normally;
The car icon is green but flashing, you need to press the boost button to force start;
The car icon is red, indicating that the product triggers protection (battery high-voltage protection, short-circuit protection, abnormal ignition, etc.).

Charge the product host

Plug the standard 30W charger into the charging socket.
Plug the home charger into the USB-C input of the JS1 host.

Jump start vehicle instruction

Make sure that the number of indicators of JS1 is not less than 60%;
Clamp the red clamp to the positive (+) pole of the battery, and the black clamp to the negative (-) pole of the battery;
Insert the blue plug of the battery clamp into the car starting port of the JS1 starting power supply;
Start the vehicle;
After starting the car, immediately unplug the battery clamp plug on the JS1 starting power supply;
Remove the battery clamp.

Charge mobile phones/tablets.

Plug the adapter cable into the USB-C output port of the JS1 jump starter.
Connect the charging connector to your mobile phone or tablet.
Touch the switch button, it can automatically recognize electronic products’ suitable parameters, and start powering the mobile phone/tablet.

Powering electronic products/vehicle products.

Insert the cigarette lighter-end interface into the 15v output port of the host.
Connect the 12V electronic products/vehicle products to the other end of the optional adapter cable.
Press the switch button to power supply.

LED light mode switching

Press and hold the power button for 3 seconds to activate the LED lighting function. Then short press the switch button, the order is: weak light, strong light, white light flash, SOS, red light flash.

Turn on low current output mode

Double-click the power button to turn on the low current output, the ambient light flashes slowly, then double-click the power button to turn it off.

FAQ and Troubleshooting

FAQ

Q : How to turn off the JS1 jump starter power?
A : The JS1 jump starter has an intelligent detection function. Once there is no load or charging is complete, it will automatically sleep to save power to avoid the loss or long-press the 6S power button to shut down.
Q : How long time to fully charge the JS1 Jump Starter?
Charging Power| Charging Time
---|---
10W| 8.7h
20W| 4.35h
30W| 2.9h
65W| 1.35h
Q. Can I charge my phone or tablet with the jump starter?
A. Yes, it includes standard USB and you can charge any mobile device by simply connecting it to one of these two ports.
Q : How long can the power supply be on standby and still start the car when it is fully charged and not in use?
A : It will be no problem if it is not used for 6-12 months. However, to extend the service life, it is recommended to charge it every 3 months.

Troubleshooting

If the following operations cannot eliminate your problem, please stop using the JS1 jump starter, and contact VANTRUE officials in time or contact the customer service personnel of the corresponding purchase channel.

Finding

|

Cause

|

Remedies

---|---|---
No response when pressing the switch button| The low-voltage protection function is activated and the circuit is cut off| Please use an adapter to charge the jump starter
START symbol flashing| JS1 jump starter detects low external battery voltage| Needs to enable forced starter (press and hold the BOOST button for 2 seconds)
Reverse connection symbol flashing| Reverse clamp detected| Connecting in the correct way can be released
STOP always on| In jumper protection or external abnormality| Operate after the protection is lifted
Battery + Output symbol + STOP flashing| Abnormal temperature| Place it in a cool place and operate after returning to normal temperature
All characters on the display flashing| Product motherboard failure| Unable to restore, seek after-sales support

Specifications

Size	2359042mm
Weight	992g
Capacity	20000mAh
Output	USB-C 65W/USB-A QC3.0/

USB-A 5V2.4A/DC 15V 10A

Warranty & Support

Warranty

The VANTRUE® JS1 jump starter comes with a full 12-month warranty. If you register your product on our official site (www.vantrue.net/register), you can extend the warranty to 18 months.

Support

If you have any questions regarding your product, please solve it in the following ways: 1. Contact customer service of your purchased channel; 2. Drops us an email at support@vantrue.net. Queries are typically answered within 12-24 hours.

Your opinion matters

VANTRUE® is firmly committed to always improving our products, services, and user experience.
If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions.

If you need the full version of user manual, please download on our official site, or connect with us today at support@vantrue.net.
Thank You for choosing Vantrue