KOHLER K-1122-GH Heated Bubble Massage Air Bath Owner’s Manual
- July 20, 2024
- Kohler
Table of Contents
KOHLER K-1122-GH Heated Bubble Massage Air Bath
Specifications
- Model : 60 x 32 drop-in Heated BubbleMassageTM air bath K-1122-GH
- Dimensions:
- Width : 60 inches
- Length : 32 inches
- Height : 16 inches
- Weight : 84 lbs (38.1 kg)
- Electrical Requirements:
- Blower : 120 V, 15 A, 60 Hz
- Heater : 120 V, 15 A, 60 Hz
- Drain Location: Reversible
Product Usage Instructions
-
Installation
This product is designed for drop-in installation only. Follow the provided installation instructions carefully. Two dedicated circuits are required, protected with Class A Ground Fault Circuit-Interrupter (GFCI). -
Required Products/Accessories
Choose between K-7271 Brass Slotted Overflow Bath Drain or K-7272 PVC Slotted Overflow Bath Drain. Additional recommended products include K-1446 Remote Installation Kit, K-23726 Drain treatment, K-23732 Tub & shower cleaner, K-31797 Slotted overflow bath drain kit, and K-31795 Slotted overflow above- the-floor bath drain kit. -
Technology
This product features BubbleMassageTM technology, providing a warm massage experience for up to 60 minutes before automatically turning off. -
Maintenance
Regularly clean the bath using the recommended tub & shower cleaner to maintain optimal performance. Refer to the detailed warranty information on the manufacturer’s website for further guidance.
Features
- 120 airjets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust massage intensity to 18 levels
- Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Textured bottom surface
- Coordinates with other products in the Archer collection
- Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
- Acrylic
Technology
- The auto-shutoff timer on the blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off
- User interface: electronic keypad control
Installation
- Reversible drain
- Drop-in
Required Products/Accessories
- K-7271 Brass Slotted Overflow Bath Drain or
- K-7272 PVC Slotted Overflow Bath Drain
- Recommended Products/Accessories
- K-1446 Remote Installation Kit
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31797 Slotted overflow bath drain kit
- K-31795 Slotted overflow above-the-floor bath drain kit
Codes/Standards
- ASME A112.19.7/CSA B45.10
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- UL 1795
- CSA C22.2 No. 218.2
- ADA
- ICC/ANSI A117.1
- IAPMO Certification
- cUL Listed
- UL Listed
KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER® Hydrotherapy Components Five-Year Limited
Warranty
See the website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DIMENSION
Required Electrical Service
Two dedicated circuits required, protected with Class A Ground- Fault Circuit- Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).
- Blower : 120 V, 15 A, 60 Hz
- Heater : 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Drain location: Reversible
- Basin area, bottom : 45-1/8″ x 19-11/16″ (1146 mm x 500 mm)
- Basin area, top: 52-3/4″ x 25-5/16″ (1340 mm x 643 mm)
- Weight : 84 lbs (38.1 kg)
- Minimum floor load: 45 lbs/ft² (219.7 kg/m²)
- Water depth: 15″ (381 mm)
- Water capacity : 58 gal (219.6 L)
- Cutou t: Drop-in, 58-1/2″ x 30-1/2″ (1486 mm x 775 mm)
Electrical component rating:
- Blower : 120 V, 10 A, 60 Hz
- Heater : 120 V, 5 A, 60 Hz, 620 W
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- This product is designed for drop-in installation only. It is not suited for use in a three-wall alcove with an overhead shower.
- Remote blower installation kit is available Bfor relocating the blower. Provide access for servicing the blower.
- Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly.
- ADA-compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 2-29-2024 20:38 – US
FAQ
Q: Can the blower be relocated?
A: Do not relocate or alter the PVC tee or coiled flexible tubing connected to
the blower. Follow the blower relocation instructions exactly to ensure proper
functioning.
Q: What are the available colors/finishes?
A: The available colors/finishes include White, Biscuit, Dune, IceTM Grey,
ThunderTM Grey, and Black BlackTM. Color tiles are intended for reference
only.