KOHLER BN330 Elongated Bidet Toilet Seat Owner’s Manual
- July 20, 2024
- Kohler
Table of Contents
KOHLER BN330 Elongated Bidet Toilet Seat
Product Information
Specifications
- Model: BN330
- Type: Elongated bidet toilet seat
- Seat Shape Type: Elongated
- Seat Front Type: Closed-front
- Power Cord Length: 39″ (991 mm)
- Electrical Service: 120 V, 15 A, 60 Hz
Product Features
- Personalization options
- Back and forth cleansing
Technology
The bidet toilet seat BN330 incorporates advanced cleansing technology for
personal hygiene.
Installation
Installation of the BN330 seat should be done as per the provided
instructions. Make sure to connect the seat to a cold water supply with a
pressure between 20 psi to 80 psi.
A dedicated circuit protected with a GFCI is required for electrical service. Ensure the receptacle is located at least 6″ above the floor and within a 32″ radius measured 2″ from the bowl ledge.
Codes/Standards
- ASME A112.4.2/CSA B45.16
- UL 1431
- CSA C22.2 No. 64
- CSA C22.2 No. 68
- IAPMO Certification
- cETL Listed
- ETL Listed
Notes
- Do not use an extension cord with this product.
- Do not plug in the seat until instructed in the installation guide to avoid malfunction.
- Avoid installing the seat where water might splash on it or where excessive moisture is present.
Contact Information
For detailed warranty information, visit the website or contact Kohler Co. at
1-800-4KOHLER (1-800-456-4537).
For the most current Specification Sheet, visit: www.NovitaSeats.com
Frequently Asked Questions (FAQ)
-
Q: Can I adjust the water pressure for cleansing?
A: Yes, the BN330 bidet toilet seat allows you to adjust the water pressure according to your preference. -
Q: Is the seat shape suitable for standard elongated toilets?
A: Yes, the seat shape of BN330 is designed to fit standard elongated toilets. -
Q: What is the recommended electrical service for this product?
A: The product requires a dedicated circuit with 120 V, 15 A, and 60 Hz electrical service, protected with a GFCI.
Features
- Fits most elongated toilets
- The compact design is just over 5″ high
- The stainless steel wand is automatically cleaned before and after each use
- Separate front and rear nozzles for maximum comfort and personalization
- Oscillating wash covers a wider area of cleansing
- Turbo setting produces a massaging effect as water moves back and forth
- Air-bubble wash offers a soft, gentle wash with effective cleansing
- The side-mounted control panel is accessible and easy to use
- Suitable lid for convenience
- Soft-close seat and lid prevent slamming
Technology
- Two-stage energy-saving feature
Installation
- Requires dedicated electrical GFCI circuit (120 V, 15 A, 60 Hz)
Codes/Standards
- ASME A112.4.2/CSA B45.16
- UL 1431
- CSA C22.2 No. 64
- CSA C22.2 No. 68
- IAPMO Certification
- cETL Listed
- ETL Listed
KOHLER® Intelligent Toilet and C3® Cleansing Seat Three-Year Limited
Warranty
See the website for detailed warranty information.
DIMENSION
Required Electrical Service
One dedicated circuit is required, protected with Class A GroundFault Circuit-
Interrupter (GFCI). Outside North America, this device may be known as a
Residual Current Device (RCD).
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Seat shape type: Elongated
- Seat front type: Closed-front
- Seat-mounting holes: 5-1/2″ (140 mm)
- Power cord length: 39″ (991 mm)
Notes
-
Install this product according to the installation instructions.
-
Connect the seat to a cold water supply of drinking quality water at a pressure of 20 psi – 80 psi (139 kPa – 551 kPa).
-
Do not install this seat in a location where: (1) water might be splashed on the product or (2) excessive moisture, high humidity levels, or condensation is present. This will avoid damage to the electronic components.
NOTICE: Do not use an extension cord with this product.
NOTICE: Do not plug in the seat until instructed to do so in the installation guide. This will avoid possible product malfunction. -
Locate the receptacle at least 6″ (152 mm) above the floor, and within a 32″ (813 mm) radius measured 2″ (51 mm) from the bowl ledge
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.NovitaSeats.com.
3-10-2024 19:24 – US
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>