Livoo DOS180 Mini Lisseur Sans Fil Instruction Manual
- June 3, 2024
- Livoo
Table of Contents
Livoo DOS180 Mini Lisseur Sans Fil
Thank you for purchasing a LIVOO brand product. We pay particular attention to
the design, ergonomics and ease of use of our products. We hope that this
product will give you complete satisfaction.
This user manual is also available on our website
www.livoo.fr
GENERAL SAFETY INSTRUCTIONS
PLEASE TAKE THE TIME TO READ THE INSTRUCTIONS THOROUGHLY ESPECIALLY BEFORE
FIRST USE.
Improper use of the device may damage it or injure the user. Make sure you use
the device for the purpose for which it is designed; we accept no liability
for damages (damages) due to incorrect use or improper handling.
-
Keep the packaging material out of reach of children. Before use, please read the instructions carefully.
-
Use only the accessories and AC adapter supplied with the device.
-
The device must be powered only at very low safety voltage corresponding to the marking on the device. This device contains batteries that cannot be replaced.
-
Do not press the buttons too hard as this may damage the product.
-
Do not use chemicals on this product.
-
When the device is not in use, make sure it is properly turned off and stored in a cool, dry place.
-
Do not use this device in a bathtub, shower or in a container filled with water.
CAUTION: Do not use this appliance near bathtubs, showers, sinks or other containers containing water. -
If the device falls into water despite all safety measures, do not touch the water! Risk of electric shock!
-
Do not charge the device in a bathroom because the presence of water in the vicinity presents a danger even if the curling iron is switched off.
-
Never immerse the appliance in water or any other liquid. Risk of electric shock!
-
To avoid fatal electric shock! Never touch the curling iron with wet hands when plugging in or while in use!
-
Never open the casing of the device. There is a risk of electric shock.
-
This appliance can be used by children aged 8 and over and by people with reduced physical, sensory or mental capacities or lack of experience. knowledge or knowledge, if they are properly supervised or if instructions on the safe use of the device have been given to them and if the risks incurred have been apprehended.
-
Children should not play with the device.
-
Risk of burns. Keep the appliance out of the reach of young children, especially during use and when cooling down.
-
Cleaning and user maintenance must not be carried out by children without supervision. Avoid children playing or touching the hair straightener when it is in use or when it is cooling down.
-
If the USB cable is damaged, it must be replaced by the manufacturer, its service agent or persons with the necessary qualifications to avoid any danger (*).
-
Do not pull on the charging cable.
-
Use the device only when the device, cable and plug show no signs of damage. Never use a defective device.
-
Never attempt to repair a faulty device yourself.
-
Never operate or charge the device if it has been moved from a cold environment to a warmer one. In such a situation, condensation may occur and damage the device. Wait until the device has reached room temperature before using it.
CAUTION: Parts of this product can become very hot and cause burns! Be particularly careful in the presence of children or people at risk. -
The danger of burns! The plates of this appliance heat up very quickly, do not touch them. Keep the device away from your skin, especially your eyes, ears, face and neck. Let cool after use.
-
Never cover the mini cordless straightener. Keep the device free of lint or hair. Danger of fire!
-
Do not place this device on objects that cannot withstand heat during use.
-
Do not leave appliance unattended when not in use.
-
Do not insert any object into the device.
-
Ensure that there are no highly flammable liquids near the device. Fire hazard!
-
Place the appliance only on a non-flammable surface. Fire hazard!
-
Warning: For external use only
-
The cordless straightener should only be used for straightening and styling human hair, for private use.
-
Danger of fire due to high temperatures. Do not use on artificial hair or hair extensions.
-
Do not use hair spray while the appliance is in operation.
-
WARNING: Notes on batteries.
-
If battery cell fluid comes into contact with skin or eyes, flush the affected area with water and seek medical attention.
-
Protect batteries from excessive heat.
-
Risk of explosion! Do not throw batteries into fire.
-
Do not disassemble, open or break the batteries.
-
Batteries should be charged properly before use. To charge the device, always follow the manufacturer’s instructions or the information contained in this manual.
-
Before first use, fully charge the battery.
-
Charge the battery fully at least 2 times a year to achieve maximum battery life.
-
This apparatus is intended to be in household and similar applications, such as:
-
kitchen areas reserved for staff in shops, offices and other professional environments
-
farms
-
customers in hotels, motels and any other type of residential environment
-
bed and breakfast type environments
Qualified competent person: technician from the manufacturer’s or importer’s after-sales service or any person who is qualified, authorized and competent to carry out this type of repair.
TECHNICAL SHEET
- Battery: 3.7V 2600mAh / Input: 5.0V 2.0A
- Dimensions: 200 x 34 x 38 mm / Weight: 0. 157 kg / USB cable length: 100 cm
- Battery charging time : 3-4 hours / One charge is enough for 25-40 minutes of use
- Standby temperatures and times : 165℃ (65min), 185℃ (55min), 205℃ (50min).
- Accessories: Pouch, USB cable (delivered without power supply unit).
CLEANING AND MAINTENANCE
- Unplug the mini straightener, and let it cool down.
- Allow unit to cool completely. To do this, place the device on a heat-resistant surface.
- Never immerse the appliance in water or other liquids to clean it.
- Clean the different parts of the device with a damp cloth.
- Please do not use sponges that may scratch, scouring agents, steel wool, metallic objects, disinfectants or hot cleaning products, as they may damage the device.
- Protect the device against dust.
- Clean the smoothing plates with a damp cloth, if necessary. Allow the smoothing plates to dry completely before using the device again or storing it for safe keeping.
- Follow the manufacturer’s instructions when cleaning the USB charge.
DESCRIPTION
USE
BEFORE USE
- First remove all packing materials and transport protection. Due to the risk of suffocation, keep children away from packaging materials.
- After washing your hair, dry it thoroughly with a towel.
- You will get the best results with dry hair. If necessary, dry your hair thoroughly with a hair dryer.
- Brush your hair until it is detangled.
- The device must be charged before first use.
- The device is equipped with a security lock. If you want to open the device, press the security lock button firmly.
Please do not use hair styling chemicals, such as hairspray, before straightening your hair, in order to avoid burning your hair. On the other hand, it is recommended to use heat protection products for the hair.
AUTOMATIC STOP
- When you turn on the power but no temperature is selected, it will automatically turn off within 15 seconds.
- When using the device, it will automatically shut down within 20 minutes.
Caution: The device becomes extremely hot during operation! There is a risk of burns in case of direct contact with the skin
- Open the device by pressing the button on the safety lock mechanism.
- Turn on the device by holding down the ON/OFF button for 2 seconds. The charge indicator is on.
- The temperature can be adjusted in three stages from 165℃, 185℃ or 205℃ by pressing the button for temperature adjustment. The thicker your hair, the higher the selected temperature can be. Chemically treated hair should be straightened to a lower level.
- The temperature indicator light flashes as the unit heats up. As soon as the flashing stops, the desired temperature has been reached. It takes 57 seconds to reach 165°C, 1.14 minutes to reach 185°C and 1.30 seconds to reach 205°C.
- Divide the combed hair into small strands, which should not exceed five centimeters in width. If necessary, separate the strands of hair with a bobby pin.
- Place a section of hair on the hair laying surface between the two straightening plates, close the device and move the device slowly and evenly down to the tip of the hair. In this process, always keep the device tightly closed. You should never hold the device for more than two seconds at any one time, so as not to damage your hair. If you want to achieve a smooth, tight-fitting look, you should always work close to the head when straightening hair strands. However, if you lift the device when you straighten your hair, you get a lot of volume.
- Repeat the operation as often as necessary.
- The charging status indicator informs you of the actual charging status of the device. Indication is at 25%, 75% and 100%. If all three displays are flashing, the device cannot be used until it is recharged.
- Temperature Lock Function: By pressing two buttons at the same time, the temperature is locked; by pressing together again, it is unlocked. If there is no power when the temperature is locked, the load can be unlocked.
- Switch the appliance off using the button and allow it to cool down before putting it away in a safe place. To prevent the smoothing plates from being opened inadvertently, press the button of the safety locking mechanism again.
- TIP: You can also make waves with the straightener! Place the sections of hair in the straightener as usual and straighten the hair. Just before reaching the tip of the hair, twist the device with the section of hair inserted, inwards or outwards (depending on the type of wave desired) to produce a slight curl in the hair.
Note: The device is delivered without plug-in power supply/USB charger. However, to charge the device, it must be plugged into the mains via a USB charger. In this regard, the following electrical instructions apply
LOADING
- Make sure the device is turned off.
- Make sure the device is in a stable position.
- Connect the changeover cable to the charging socket of the device.
- Connect the other end of the charging cable to a USB charger.
- Plug the plug of the USB charging cable into an electrical outlet (Voltage according to the nameplate)
- Make sure all cables are properly connected, otherwise the device cannot be charged properly.
- The device indicator light will flash to indicate that the device is charging. As soon as the charging process is complete, the indicator light flashes longer.
- To avoid damaging the rechargeable battery, the device should not be charged for more than 12 hours.
- Depending on usage and hair characteristics, you may use the device for approximately 25-45 minutes before it needs to be recharged. The maximum capacity of the rechargeable battery is only reached after several charging processes.
- Only recharge the device when the rechargeable batteries are completely empty. Thus, the full capacity of the rechargeable batteries remains intact for a longer period.
- Caution: Never connect the device to the mains if a rechargeable battery is not inserted in the device!
- Tips: The device can also be charged with another USB charging cable, as long as it meets the technical specifications. If in doubt, contact our technical customer service.
- It is also possible to connect the supplied USB charging cable to a USB port on a computer and charge the device that way. However, for technical reasons, this loading process can take a long time; therefore we recommend charging the device with a USB charging device.
DISPOSAL
- Disposal of used batteries and accumulators (Applicable in European Union countries and other European countries with separate collection systems)
- This symbol, affixed to the batteries and accumulators or on the packaging, indicates that the batteries and accumulators supplied with this product must not be treated as simple household waste.
- By ensuring that these batteries and accumulators are disposed of appropriately, you actively participate in preventing the negative consequences that their mishandling could have on the environment and on human health. Recycling materials also contributes to the preservation of natural resources. For products which for reasons of safety, performance or data integrity require a permanent connection to a battery or accumulator, you should contact a qualified technical service to have it replaced. By returning your end-of-life electrical device to an appropriate collection point, you ensure that the built-in battery or accumulator will be treated correctly.
For all other cases and to safely remove batteries or accumulators from your device, refer to the user manual. Return used batteries or accumulators to the appropriate collection point for recycling. For any additional information about the recycling of this product or batteries and accumulators, you can contact your municipality, your local waste collection center or the point of sale where you purchased this product.
Proper disposal of the device
- (electrical and electronic equipment)
- (Applicable in the European Union and other countries in Europe that have adopted separate collection systems)
- The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that used household appliances should not be disposed of in the normal stream of household waste.
- Used devices must be collected separately in order to optimize the rate of recovery and recycling of the materials that compose them and reduce the impact on human health and the environment.
- The symbol of the crossed-out dustbin is affixed to all products to remind you of the obligations of separate collection.
- Consumers should contact the local authorities or their retailer regarding the procedure to follow for the removal of their device.
Non contractual photo
- Concerned about the quality of its products, reserves the right to make changes without notice.