TREKURE Beta06 Jump Starter User Guide

TREKURE Beta06 Jump Starter

IMPORTANT SAFETY WARNING

ATTENTION Please read the following safety warning before using the product and take safety protection measures to avoid malfunctions caused by accidental operation.
Personal Safety

1. Store in a cool and well-ventilated place out reach of children and pets.
2. Do not place the product in high temperature environment for a long time. The operation temperature of this product is -4F~140F. The storage temperature should not exceed 122?.

Electrical Safety

1. Only start vehicles with the smart jumper cable supplied by the manufacturer.
2. Do not use the product if the clamp or cable is damaged.
3. Do not connect the red and black clamps together when the product is outputting.
4. Do not connect the red and black clamps to the same piece of metal.
5. Do not disassemble or modify this product.
6. Do not use detergent to clean this product.
7. Do not abuse this product and avoid heavy dropping or repeatedly hitting it.
8. Do not operate the product in explosive environments such as flammable liquids gases or dusts.
9. Do not immerse the product in water.

Battery Safety

1. Do not litter the product and it should be safely recycled.
2. Do not incinerate the product or exposed to high temperatures as they may explode.
3. Only use replacement parts or accessories provided or recommended by manufacturer.

WARRANTY

TREKURE provides customers with warranty of 24 months from the date of purchase.
For assistance or warranty cover claim, please contact us via email at support@trekure.com

PRECAUTIONS BEFORE USE

1. Please use the included USB-C cable and 5V/2A or above adapter for charging.
2. Please make sure the device is fully charged before using the product for the first time.
3. It is recommended to fully charge the device at least once every 3 months to help extend the life of the device.

SPECIFICATIONS

PRODUCT OVERVIEW

1. Power Button
2. Lighting Button
3. Inflation Mode Switch Button
4. Air Pressure Reduction Button (-)
5. Air Pressure Increase Button (+)
6. Pressure Unit Switch Button
7. Inflation Start Button
8. Jumpstart Port
9. USB Output 2(18w)
10. USB Output
11. USB-C Input
12. Air Hose Interface
13. LED Light DISPLAY OVERVIEW
14. Discharging
15. Charging
16. Inflation Mode (5 Types)
17. Air Pressure Value
18. Air Pressure Unit (3 Types)
19. Battery Indicator

CHARGING YOUR JUMP STARTER

1. Insert the charging cable into USB C port.
2. Connect to 5V/2A or above adapter (adapter not included).

CHARGE ELECTRONIC DEVICES

1. Plug the cable into corresponding USB output port.
2. Connect to electronics, such as smartphones. And then, press the power on/off button.

LED LIGHTING

INFLATE YOUR CAR TIRES

1. Connect the air hose firmly to product and tire respectively, and tighten it.
2. Set pressure. Short press the power button “U” to power on, select the inflation mode ” M” and air pressure unit ” U ” , then optionally adjust the air pressure value with buttons “—” “+”.
3. Long press the inflation button “Oo” to start. It will stop automatically when the air pressure reaches the preset value.

Tip : If used for a long time, it is recommended to stop every 10 minutes to cool down.

Support 5 inflation modes, up to 150 PSI

Checking your car’s tire pressure

1. Short press the power button “ ” to turn on the machine.
2. Connect the air hose connector to the tire nozzle and pay attention to press to the end and press firmly.
3. The pressure shown on the display is the current tire pressure.

JUMP START YOUR CAR

1. Insert the jumper cable into the jump starter (20% power at least).
2. Connect the clamps to car battery (red to +, black to -).
3. Start your car engine.

ABOUT THE FORCE START FUNCTION
If three attempts fail when the clamps correctly connected to your car, you can use the Force Start Function to enter boost mode.

3 steps to fix the problem:

1. Check the clamps connection and the product’s battery is above 20%.
2. Press the Force Start Button for 3 seconds.
3. The indicator will be green, and go back to start engine ignition.
   Caution : When using this function, auto-detection and safety features will be disabled temporarily.

TROUBLESHOOTING ABOUT CLAMPS

In any of the following situations, the smart clamp will turn protections on:

2.   Over-heating protection —Remove the clamps to let it cool

3.   Timeout protection —Connection timed out. Start engine within 60s or remove the clip within 30s after a successful start

---|---
Solid red with discontinuous beep| 1.  Reverse polarity protection —Reverse the clips and ensure the correct connection (red to +, black to -)

2.   Sticking fault —Contact support@trekure.com

for replacement parts

Solid red with long beep| Short-circuit protection —Don’t connect the clips together or to the same metal
Other| Please contact support@trekure.com with details

TROUBLESHOOTING ABOUT JUMP STARTER

| Low temperature charging protection

—Unplug the charger and wait for the protection to be released

---|---
| High temperature charging protection

—Unplug the charger and wait for the protection to be released

| High temperature discharge protection

—Unplug the electrical equipment and wait for the protection to be released

| Cylinder over temperature protection

—Do not touch the machine and trachea immediately to prevent high temperature burns and wait for the machine to stand for 10 ~ 15 minutes

Declaration of Conformity
We (EU based importer is responsible for this declaration)

Outong GmbH
(Company name)
Brehmstr.56, 40239 Duesseldorf, Germany
(Company address)

declare under our sole responsibility that the product
Trade name: TREKURE
Equipment: Jump Starter
Model No. : Beta 06

to which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to LVD Directive(2014/35/EU) & EMC Directive(2014/30/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the following standards were applied:

EN IEC 62368-1:2020+A11:2020
EN 55032:2015 AMD.1:2020+A11:2020
EN 55035:2017AMD.1:2020
EN IEC 61000-3-2:2019/A1:2021
EN 61000-3-3:2013AMD.1:2019+ AMD.2:2021
IEC62321-3-1:2013
IEC62321-4:2013
IEC62321-5:2013
IEC62321-6:2015
IEC62321-7-1:2015
IEC62321-7-2:2017
IEC62321-8:2017

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>