AIROX T20 Wireless Bluetooth Speaker Instruction Manual
- July 20, 2024
- AIROX
Table of Contents
AIROX T20 Wireless Bluetooth Speaker
Thank you for using our company’s Bluetooth digital speakers, this series of Bluetooth digital speakers’ appearance design fashion, rich functions, and good compatibility, let you really experience the wireless connection, free to listen to the fun of hi-fi music! It is the best choice for your office, going out, driving and outdoor travel. Please read this manual before using the product, and you have ensured the correct use of the product so that you can operate and use it more convenient and fast.
Kindly Reminder
- Please read the instructions before using the product.
- For the first time, please charge the product first.
- Can not use the voltage exceeds 5V-1A fast charging “such as PD fast charging, mobile phone fast charging head, Qualcomm fast charging and other fast charging head”, this category of charging head is compatible with the product motherboard, if the enforcement will damage the product motherboard speaker, causing permanent damage, the product can not be used.
Product Features
- Support for Bluetooth wireless connection
- Support call mode
- Support for TF card playback
- Support for AUX external audio source input playback
- Support for the TWS couplet
- Support for the built-in battery
- Support for multiple lighting modes
- Support for multiple white noise modes
- Support USB charging
Product Parameter
- Model: T20
- Material: ABS+iron
- Track system: double sound channel
- The control mode: key
- Bluetooth solutions: Jerry, JL
- Bluetooth version: Bluetooth V5.3+EDR
- Support Bluetooth profile: A2DP, AVRCP. HSP, HFP
- Bluetooth working frequency: 2.402GHz-2.480GHz
- Bluetooth range: ≥10m
- Max power: ≥ 15W
- Best call distance (TBR): $30CM
- (TYP): -80dBm
- S/N: ≥85db
- Speaker type: 2 45MM 4Ω10WExternal magnetic full frequency horn
- Battery: lithium battery 18650 3.7V 3600MAH
- Shut off the current: ≤ 504A
- standby current: ≤20mA The connection is not played
- Shutdown storage time: About 1.5 years (standard shipment 3. 7V 60%)
- Music time: About 4-6 hours
- Talk time: > 4 hours (90% volume)
- Charging input criteria: TYPE-C USB, DC5V 1000MA
- Charging time: About 3.5 to 4 hours
- Battery cycle life: Charge and discharge cycle 300 times, a capacity of 80%
Product use operation Products using the operating
Key function description:
- Short press a song / long press add volume
- Long press power on / off
- Short press the last song / long press the volume
- Long press to switch mode / short press to pause play
- Long press to close the light / Short press to switch the Light mode
- Short press to reduce light brightness
Short press to increase the light brightness
Under the boot state, short press timing <press the first timing 30 minutes / the second timing 60 minutes / the third 90 minutes / the fourth close> / Bluetooth mode, long press TWS couplet/break- Charging port: TYPE-C charging port
- U-disk interface: USB storage socket /USB charging
- TF card interface: TF memory card port
- Indicator: Charging indicator
Key operation description:
- Long press the power button for 3 seconds to start the power, sound prompt sound, white light flash, successfully start the default white noise mode, press the +/- button can switch the white noise sound / or reduce the volume, a total of 5 sound effects, short press M button can pause the white noise
- Long press M key to convert to Bluetooth mode, open the Bluetooth function of the mobile phone, click search Bluetooth device, find the T20″ Bluetooth name, and click connection.
- After the connection is successful, the white light is on, and there is a connection prompt sound.
- When the product is started, Bluetooth will automatically connect the last device before the shutdown, and will automatically switch to the paired state.
- Open the device player, click the play button to start playing music, short press the +/- key to select play music / long press to increase the decreasing volume, long press M / pause button, and play pause.
- Insert the external audio line / TF card / U disk autonomous recognition and start to play, support after the insertion of the first play, long press the node key to manually switch mode.
- Long press the light key to turn off / turn on the light, short press the light key to switch the light mode, short press light-reduce light brightness / short press light + increase light brightness.
Light timing:
When the machine is turned on, press the timing key “drop one prompt tone” for
30 minutes, press the second “drop two prompt tone” for 60 minutes, press the
third “drop three prompt tone” for 90 minutes, and press the fourth “no” to
close.
TWS antithetical couplet:
Machine boot long press M key switch to bluetooth node, long press the
timing key prompt sound, connecting host flash white light. another white
light on. open the bluetooth function. click search bluetooth device, find the
T20″ bluetooth name, and click the connection, two products play at the same
time, long press one of the product tining keys to disconnect/connect.
TF card / U disk play:
- A: Power-on state insert U disk / TF card with prompt tone
- B: The music files in the U disk / TF will play automatically
- C: Play state can control play/pause, up / down, high/low volume
AUX broadcast:
The boot state uses the 3. 5WN audio line to inserted into the AUX input
interface and the other side is connected to the mobile phone/computer/tablet
/ other external audio devices, can play the external device music, and the
key can control the volume playback pause.
Lon power status:
When the battery power is less than 3.4Y, the low-power alarm sound sounds,
please charge in time, and the alarm product will automatically shut down for
three times.
Product charging:
Charger specifications selection DC 5V 1000ml, charging red light flashing,
fully charge the red light off.
LED Light instructions
- Paired status: Light flash
- Successful pairing: the lights are always on
- Play status: slow light
- Charging status: the red light flashes
- Charging completion: the red light is off
Product peripherals
- U disk: (MICRO USB) memory
- TF card: TF (MICRO SD) memory card
- Audio interface: 3. 5MM audio cable
- Charging interface: TYPE-C USB DC 5V 1000ml
Transport
Products in the half charge (50-90% electricity state) packaged into boxes for transportation, in the process of transportation, should prevent violent vibration, shock or extrusion, prevent the sun and rain, can be applicable to cars, trains, ships, aircraft and other ordinary transportation.
Warning matters and precautions when using the products
- Do not clean this product with abrasive cleaners.
- Never keep this product heated or near to a fire source, such as a cooking stove.
- Do not let this product be exposed to direct sunlight for a long time.
- Do not discard this product in the fire to avoid an explosion.
- Do not attempt to dismantle this product to make any modifications, as it does not contain any service components.
- Do not use this product in the rain.
- If you do not intend to use this product for a long period, please store it in a dry environment and charge the sound at least once a month to extend its life and avoid extreme temperature and dust.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help!
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements in
portable exposure conditions without restriction.