Ledlenser ML4 Mini Lantern User Guide
- July 18, 2024
- LEDLenser
Table of Contents
Ledlenser ML4 Mini Lantern
Product Specifications
- Model: BJ@+@.-@26(@7@QEG ML4
- Power Source: 14500 battery
- Output: 5V
- Color Options: White, Red
- Modes: Boost, White Mode, Red Mode
- Runtime: Up to 30 minutes
Product Usage Instructions
Turning the Light On/Off:
To turn the light on, press the power button for 2 seconds. To turn it off, press and hold the power button for 3 seconds.
Switching between Modes:
To switch between White Mode and Red Mode, single-click the power button. For Boost mode, double-click the power button.
Adjusting Power Levels:
To adjust power levels, cycle through Low Power, Mid Power, and High Power modes by single-clicking the power button. The Blink mode can be accessed by holding the power button for more than 5 seconds.
Battery Replacement:
The ML4 flashlight uses a 14500 battery. To replace the battery, unscrew the tail cap, remove the old battery, and insert a new one following the correct polarity.
Frequently Asked Questions
- How do I know when the battery is low?
- When the battery is low, the light will blink or change colors. Refer to the user manual for specific indicators based on the model.
- Can I use AA batteries in this flashlight?
- No, the ML4 flashlight is designed to be used with a 14500 battery only. The use of other batteries may damage the device.
- Where can I find more information about this product?
- You can visit ledlenser.com for more information, updates, and support regarding the ML4 flashlight.
What In Box
Battery Installation
Product Usage Instructions
Safety Instruction
Ledlenser GmbH & Co. KG
- Kronenstrasse 5-7
- 42699 Solingen
- Germany
- Phone +49 212/5948-0
- Fax +49 212/5948-200
- info@ledlenser.com
- ledlenser.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>