KOHLER K-707002-L 62 Inch H Sliding Bath Door Owner’s Manual
- July 18, 2024
- Kohler
Table of Contents
KOHLER K-707002-L 62 Inch H Sliding Bath Door
Product Information
Specifications:
- Model: 62 H sliding bath door with 5/16-thick glass K-707002-L
- Material : Glass
- Available Colors/Finishes: Bright Polished Silver Anodized (SHP), Dark Bronze Anodized (ABZ), Brushed Nickel (BNK) Available Glass Option: Crystal Clear
- Dimensions:
- Height: 62 inches (1575 mm)
- Width: Min 55-5/8 inches (1413 mm), Max 59-5/8 inches (1514 mm)
- Base-To-Wall: 3/8 inch (10 mm)
- Shower Ledge Min: 2-1/2 inches (64 mm)
- Flat Shower Wall Min: 2-1/2 inches (64 mm)
- Installation Codes/Standards: ANSI Z97.1, CAN/CGSB-12.1, CPSC 16CFR 1201
Product Usage Instructions:
Installation:
Install this product according to the provided installation guide. Ensure the vertical opening is a minimum of 64-1/2 inches (1638 mm) for proper clearance during installation.
Cleaning and Maintenance:
The glass door features a technology that repels water, soap scum, and residue, making cleaning easy. Use a microfiber cloth for cleaning. Avoid using abrasive cleaners that may damage the glass surface.
Color and Finish Options:
Choose from Bright Polished Silver Anodized, Dark Bronze Anodized, or Brushed Nickel finishes to match your bathroom decor.
Warranty Information:
Refer to the manufacturer’s website for detailed warranty information on this product.
FAQ
- Q: Can the wall jambs cover existing shower door holes?
- A: The wall jambs are made of clear plastic and may not completely cover existing shower door holes. Ensure proper alignment during installation.
- Q: What is the recommended vertical opening for installation clearance?
- A: The vertical opening should be a minimum of 64-1/2 inches (1638 mm) to allow clearance for installing the top track over the wall jambs.
Features
- The center-guided mechanism for smooth, quiet sliding action and easy cleaning
- The contemporary towel bar and knob combination offers storage on the outside of the door without encroaching on the bathing space
- CleanCoat®+ glass coating creates a hydrophobic barrier that repels water, soap scum, and residue, saving time and protecting shower doors 10 times longer than original CleanCoat. (Based on 2021 internal wear/abrasion testing using a microfiber cloth.)
- Tempered glass ensures enhanced safety and durability
Material
- Frameless, heavy 5/16″ (8 mm) thick Crystal Clear tempered glass
Technology
- The frameless design with minimal metal allows for greater ease of cleaning
- A low bottom track creates easy entry and exit to the bathing space
Installation
- Out-of-plumb adjustability simplifies installation
- Sliding bath door
- Not for use in hospitality
Codes/Standards
ANSI Z97.1
CAN/CGSB-12.1
CPSC 16CFR 1201
KOHLER® Bath and Shower Doors
Ten-Year Limited Warranty
See the website for detailed warranty information.
Available Colors/Finishes
Color tiles are intended for reference only.
62″ H sliding bath door with 5/16″-thick glass
DIMENSIONS
Technical Information
All product dimensions are nominal.
Base-To-Wall
Radius – Max:
3/8″ (10 mm)
Shower Ledge Min
Flat:
2-1/2″ (64 mm)
Shower Wall Min
Flat :
2-1/2″ (64 mm)
Notes
Install this product according to the installation guide.
Wall jambs are made of clear plastic and may not cover existing shower door holes.
NOTICE: The vertical opening should be a minimum of 64-1/2″ (1638 mm) to allow clearance for installing the top track over the wall jambs.
The vertical opening should be a minimum of 64-1/2″ (1638 mm) to allow for installation clearance.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada
6-11-2024 19:46 – US
References
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER