OSD NERO Eclipse Series Wall Mounted Speakers with LEDs Owner’s Manual
- July 17, 2024
- OSD NERO
Table of Contents
OSD NERO Eclipse Series Wall Mounted Speakers with LEDs
Specifications
- Model: Eclipse Series (Eclipse25 WM, Eclipse25 WMS, Eclipse25 Bollard)
- Light Color: 3000K
- Light Output: 70 lumens
- Power Requirement: 12 Volts, up to 10 Watts
- Area of Illumination: Approx. 1.5′
Product Usage Instructions
LED Lighting Installation
Ensure you have a low voltage transformer (not provided). Choose a
transformer suitable for your needs. The LED light requires 12 Volts and up to
10 Watts. The light color is 3000K with a maximum output of 70 lumens, similar
to a 25-watt incandescent bulb. The area of illumination is approximately
1.5′.
Eclipse25 Bollard Installation
When installing the Eclipse25 Bollard, note the 10″ Die-cast Aluminum Stake
attached to the bottom. Create a starter hole to ensure the stake reaches the
full depth for proper installation.
Eclipse25 WM & WMS Installation:
For wall mount installations, consult a landscape lighting designer for
guidance on proper installation.
Landscape Wiring Guidelines
Choose between 12/2 AWG, 14/2 AWG, or 16/2 AWG landscape wire. Use
CL3-rated wire suitable for in-wall installation and direct burial
applications. Refer to the Landscape Wiring Chart for guidance on wire
selection based on length and power requirements.
FAQ
-
Do You Have to Bury Landscape Wire?
- Yes, burying landscape wire is recommended for safety and durability purposes.
ECLIPSE SERIES
ECLIPSE25 WM | ECLIPSE25 WMS ECLIPSE25 BOLLARD
OWNER’S MANUAL
INTRODUCTION
Introduction
OSD – The Best Value in Sound
Thanks for joining the OSD owners club.
Experience the OSD Nero Eclipse25 series, where inviting LED lighting blends with rich, clear audio. Featuring the Eclipse25 Bollard for enchanting outdoor environments, the versatile
Eclipse25 WM Surface Wall Mount, and the sleek Eclipse25 WMS Slim Surface Wall Mount Speaker, each crafted to enhance any space with their harmonious design and pleasing sound.
See additional connection options in this manual to achieve the best performance for your application.
If you have any questions about the Eclipse Series, please contact us directly.
- www.osdaudio.com
- email: support@osdaudio.com
- Phone: 888-779-4968
MODEL DESCRIPTION
Eclipse25 Bollard
2.5” 70V/8Ohm Bollard Omni Speaker w/LED Light
- Uniform Dispersion Array
- 1 x 2.5” Full Range Driver
- 8-Ohm Power: 10Watts RMS
- 70V/100V Tap : 10Watt audio
- Dispersion: Horizontal: 360° ,Vertical: 120°
- Frequency Response: 90-18KHz
- Sensitivity: 88dB
- Light Power : 3W (DC12V)
- Color temperature : 3000k
- Lumens: 70
- 10” Die Cast Aluminum Install Stake
- Dimensions: (H x W) 800mm x 108mm (155mm Base) 31.49”x 4.25” (6.1” Base)
- IP 65 Outdoor Rated
Eclipse25 WM
2.5” 70V/8Ohm Surface Mount Omni Speaker w/LED Light
- Uniform Dispersion Array
- 1 x 2.5” Full Range Driver
- 8-Ohm Power : 10Watts RMS
- 70V/100V Tap : 10Watt audio
- Dispersion: Horizontal: 360° ,Vertical: 120°
- Frequency Response : 90-18KHz
- Sensitivity: 88dB
- Light Power: 3W (DC12V)
- Color temperature : 3000k
- Lumens: 70
- Dimensions: (H x W) 320mm x 108mm 12.59”x 4.25”
- IP 65 Outdoor Rated
Eclipse25 WMS SLIM
2.5” 70V/8Ohm Surface Mount Omni Speaker w/LED Light
- Uniform Dispersion Array
- 1 x 2.5” Full Range Driver
- 8-Ohm Power: 10Watts RMS
- 70V/100V Tap : 10Watt audio
- Dispersion: Horizontal: 360° ,Vertical: 120°
- Frequency Response : 150-18KHz
- Sensitivity: 88dB
- Light Powe r: 3W (DC12V)
- Color temperature : 3000k
- Lumens: 70
- Dimensions: (H x W) 320mm x 90mm 12.59”x 3.54”
- IP 65 Outdoor Rated
INSTALLATION
LED Lighting Considerations
Note: We do not provide the low voltage transformer. The choice of transformer
should be decided by the landscape lighting designer, or if you are installing
it yourself, it can be sourced directly online from sites such as Amazon.
The LED light requires 12 Volts and up to 10 Watts.
The light color or temperature is 3000K, commonly called “Cool,” just above
neutral. The maximum light is 70 lumens, similar to a 25-watt incandescent
light bulb. The area of illumination is approx. 1.5’
Red (+) and Black (-) wires are labeled for the 12Volt lighting connection. There are five wires from the Speakers and seven in the wiring bundle. These other five wires pertain to the multiple Audio Connection Options (8-ohm/70V/100V). The wire bundle comes from the bottom of the Eclipse25 Bollard and through the Wall mounts of the Eclipse25 WM & Eclipse25 WMS. So, the Black and Red wires go to the 12 Volt Transformer for the LED, and a combination of the five wires connect to the Audio Power/Source.
Installing the Eclipse25 Bollard Landscape Speaker/Light Combo.
When installing the Eclipse25 Bollard on the ground, please note there is a
10” Die-cast Aluminum Stake connected to the bottom of the Bollard. You may
need to create a starter hole to ensure the stake goes down the 10 inches, so
the bottom plate is flat on the ground once you refill the cavity surrounding
the stake.
Installing the Eclipse25 WM & WMS Wall Mount Speaker/Light Combos.
The Eclipse Wall Mounted Speakers with LEDs have the same 7-wire pigtail from
the cylinder through the wall mount bracket. A removable round wall mount
template first mounts to the wall, and then the Eclipse Speaker/LED mounts to
the template. It would be best if you determined where the wall bracket will
go. Then, drill a .75” to .875” hole through the center of the template. You
will need to run the wire into the hole. You will terminate up to six
available wires for the 70V or 100V hookup along with the LED connection. Only
four of the seven wires are used for the 8-ohm/LED option. The Red (+) and
Black (-) are labeled for the 12Volt LED connection. Note: A wire guide is
connected to the two-foot wire loom inside the wall mount bracket. Depending
on your access, you can terminate the wires before pushing them through the
hole or afterward. When in doubt, consult a landscape lighting designer.
What Gauge Wire for Landscape Lighting and Sound?
- There are a couple different options here when it comes to landscape wiring. Luckily, we have some of the most popular choices (White or Black Jacket Option) in stock to help you.
- The most popular gauge sizes are 12/2 AWG landscape wire, 14/2 AWG landscape wire, and 16/2 AWG. Our Low Voltage Wire is rated for Direct Burial or above ground. The outer jacket is also CL3-rated for in-wall installation for all residential and most commercial low-voltage applications for both LED lighting and Audio transmission.
- When you see these numbers in front of the cable, this tells you the size of the conductors inside the line. Each size performs well for different lengths and watts you need for your installation.
- The length in this chart goes up to 120 feet, and the Watts goes up to 120. This gives you great coverage for the majority of your installations. Most cable runs for outdoor landscape lighting will fall into the 12, 14, or 16 AWG category.
- Since we covered an overview of landscape wire, let’s now get into some more common questions in regard to landscape wiring:
LANDSCAPE WIRING CHART
Watts| 10| 20| 30| 40| 50| 60| 70|
80| 90| 100| 110| 120
---|---|---|---|---|---|---|---|---|---|---|---|---
40 ft| 16| 16| 16| 16| 16| 16| 16| 16| 16| 14| 14| 12
60 ft| 16| 16| 16| 16| 16| 16| 16| 16| 14| 14| 14| 12
80 ft| 16| 16| 16| 16| 16| 16| 14| 14| 14| 14| 14| 12
100 ft| 16| 16| 16| 16| 14| 14| 14| 14| 14| 12| 12| 12
120 ft| 12| 12| 12| 12| 12| 12| 12| 12| 12| 12| 12| 12
AWG
How Far Can You Run 14 Gauge Landscape Wire?
From the above chart, 14AWG landscape wire is recommended for up to 100ft
using up to 90 Watts.
Do You Have to bury Landscape Wire?
The great thing about landscape wire is that you don’t necessarily have to
bury it. The cables jacket rating gives it the ability to perform in
conditions such as sun and rain. If you’re landscape wire run requires some
exposure that is fine. We do recommend protecting your cable as much as you
can whether that is in conduit or under awnings. Most landscape wire is buried
out of sight.
8-Ohm Connection W/12V Light
Connect the Yellow(+) and Blue(-) wires to 8-Ohm Amp Single Channel(+/-)
Output Connect Red(+) and Black wires to 12Volt Transformer(+/-) Output for
the Light Cut/Tape Off Orange (70V Loop), Brown (70V +) and Green (100V +)
wires
70V Connection W/12V Light
Connect the Brown (70V+) and Blue(-) wires to 70V AMP(+) and Com(-)
Connections Connect Red(+) and Black wires to 12Volt Transformer(+/-) Output
for the Light Connect the Yellow(+) and Orange (100V loop) wires together
Cut/Tape Off Green (100V+) wire not used
100V Connection W/12V Light
Connect the Green (100V+) and Blue H wires to 100V AMP(+) and Com H
Connections Connect Red(+) and Black wires to 12Vott Transformer(+/-) Output
for the Light Connect the Yellow(+) and Orange (100V Loop) wires together
Cut/Tape Off Brown (70V+) wire not used
SAMPLE SYSTEMS
Eclipse25 Bollard – 70 Volt, 10Watts x 4 Speakers + 40W of 50W
Sample System Diagram
Eclipse25 WM – Right and Left 8-Ohm Stereo X 2pr = 4-ohm pair
Sample System Diagram
Warranty Info
All OSD NERO Eclipse25 Outdoor Speaker products have a (3) year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period OSD AUDIO will replace any defective part and correct any defect in workmanship without charge for either parts or labor OSD AUDIO may replace returned speakers with a product of equal value and performance. In such cases, some modification to the mounting may be necessary and are not OSD AUDIO’s responsibility.
For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by OSD AUDIO. The unit must be returned to OSD AUDIO at the owner’s expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damaged resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by OSD Audio
OSD AUDIO sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any OSD AUDIO product purchased from an unauthorized dealer or other source, including retailers, mail over dealers and on-line sellers will not be honored or serviced under existing OSD AUDIO warranty policy. Any sale of product by an unauthorized source or other manner not authorized by OSD AUDIO shall void the warranty on the applicable product.
Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service at RMA@audiogeargroup.com for a Returned Merchandise Authorization (RMA) number# then the unit must be shipped to OSD AUDIO at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the unit(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.
This Warranty Does Not Cover
Damage caused by abuse, accident, misuse, negligence, or improper operation
(installation)
- Any products that have been altered or modified
- Any product whose identifying number of decal, serial #, etc. has been altered, defaced or removed
- Normal wear and maintenance.
OSD Audio | Brea, CA. | osdaudio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>