relaxn 530694 Mako Series Carbon Fibre Push Button Switch Panel User Manual
- June 3, 2024
- relaxn
Table of Contents
relaxn 530694 Mako Series Carbon Fibre Push Button Switch Panel
FEATURES
- Elegant Carbon Fiber Vinyl film with vivid 3D texture.
- Ultra Compact Panel Size / mounting holes compatible with BEP’s Contour Panel Series,
- Screw hidden design with polished stainless steel bezel. 20A Anti-Vandal Stainless Steel Push Button Switches with backlight labels.
- 40 pcs assorted label stickers included.
- Rated IP66- Protected against powerful water jets from all directions (when mounted).
- Water-tight gasket included.
INSTALLATION INSTRUCTIONS
- Disconnect all power (DC).
- Cut opening for mounting location using the template provided.
- Connect the positive wire (red) to the DC power source (the batteries) and the LED negative feed wire (yellow) to a DC negative bus bar.
- Connect the devices positive to the load terminals of the switches. Connect the negative wires of the devices to a negative bus bar. Apply desirable labels to the recessed area at corresponding branches.
- Mount the switch panel with the included self-tapping screws.
- Reconnect the DC power. Turn on and off all branch circuits to check if the panel works normally.
Note: Connect the switch panel to a fuse board using suitable fuses for
your application.
SPECIFICATIONS
| Faceplate: | Plastic with Carbon Fiber Vinyl Film |
|---|---|
| Outer Frame: | Stainless Steel |
| Switch Rating: | 20A@DC 12V |
| Panel Rat ing: | MaxAmp20A |
| Panel Depth: | 105mm |
| Dimensions: | 64mmxl69mm |
| Cut -Out : | 32mmxl50mm |
| IP Rating: | IP66 |
| LED Backlight Colour: | Red (530694) I Blue (530696) |
WIRING DIAGRAM
MOUNTING TEMPLATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>