relaxn 709460 Led Batten Light Sensor Installation Guide
- June 9, 2024
- relaxn
Table of Contents
relaxn 709460 Led Batten Light Sensor
FEATURES
- Sensor detects movement and stays on for 3 minutes after detection.
- PIR detection 4-6 metres away.
- Low degradation LED’s with 50,000 hours lifespan.
- IP20 rated.
- Mounting hardware included.
SPECIFICATIONS
| Dimension: | 1200mm x 80mm x 43mm | Frame Colour: | White |
|---|---|---|---|
| Volts: | AC 220V-240V | LED Colour: | White |
| Light Output: | 3600LM | Working Temperature: | -20°c-+45oc |
| Watts: | 36W | Dimming: | Non-Dimmable |
| LED Chip Type: | SMD2835 | LED Lifespan: | 50,000 Hours |
| SDCM: | <6 | Protection Class: | Class I |
| CRI: | >BORa | Material: | Aluminum Heatsink and Base/ PC Diffuser |
| Beam Angle: | 120° | Installation: | Surface Mount |
| IP Rating: | IP20 | Certificates: | CE, SAA, RCM and Rohs |
DIMENSIONS
INSTALLATION – SURFACE MOUNT
-
Step 1. Ensure proposed power supply is not live.
-
Step 2. Drill 2 0 5mm holes in the ceiling, a maximum of 1100mm apart.
Gently knock the provided plastic expansion tubes into the pre-drilled holes, ensuring the plastic tubes are flush with the mounting surface. -
Step 3. Take the flush mount clips and line up the fixing holes to the pre-drilled location holes on your mounting surface. Fix both flush mount clips using the screws provided.
-
Step 4. Open the back terminal cover plate of the termination box to find the connection terminal and interconnect the main power supply cables with the connection terminal. Make sure that all connections are secure and properly tightened.
-
Step 5. Clip the LED Batten Sensor Light onto the flush-mounted clips.
NOTE: Ensure installation is correct before switching on the fitting to test.
WARRANTY
Sam Allen Wholesale warrants this product against defects in manufacture and
workmanship for a period of l year from the date of purchase. This warranty is
only valid for products installed by a qualified electrical contractor and
operated within the guidelines specified by Sam Allen Wholesale, and within
the correct operating voltage ranges as stated on the product’s rating label.
Warranty does not include damage or loss arising from incorrect installation,
operation or maintenance of this product, damage caused through modification,
service by unqualified or unauthorised personnel or lack of regular
maintenance and cleaning. Proof of installation by qualified personnel may be
required.
This warranty is provided in addition to any other rights and remedies of the
customer under any law. In applications not intended for household, personal
or domestic use, liability is limited to replacement or reimbursement of the
product only. Sam Allen Wholesale does not warrant the costs of removal or re-
installation of this product or associated components. Our goods come with
guarantees that cannot be excluded under the Australian Consumer Law. The
consumer is entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if goods fail to be of
acceptable quality and the failure does not amount to a major failure. To make
a claim under the warranty: Please return to the point of purchase, including
reasonable proof of that purchase.
WARNING
- This product must be installed by a licensed electrician.
- Installation must adhere to local and national wiring rules.
- Disconnect or turn off the power before installation.
- Check whether the product has been damaged during transport.
- Do not operate/install the product that appears damaged.
- Verify the supply voltage is the same as the rated luminaire voltage.
Proudly distributed by Sam Allen Wholesale
www.samallen.com.au
www.relaxn.com.au