relaxn 530016 Horizontal Phone Pocket Instruction Manual

: June 15, 2024
: relaxn

Table of Contents

Features
Product Details
Specification Guide
Product Dimensions
PARTS / TOOLS NEEDED:
Documents / Resources

Horizontal Phone Pocket

Features

Recessed pocket protects the phone from the sun’s harmful rays
Recessed format capitalizes on unused space, such as under furniture
Recessed pocket is designed to fit most phone sizes
Qi certified to meet all wireless charging standards

Product Details

Dimensions	4.5”D x 9.2”W x 4.5”H
Bezel Material	Black Polycarbonate
Housing Material	ABS
Cutout	8”W x 3.75”H
Voltage	10-30V DC
Input Current	3.4A (Wireless)
Charging Capacity	Wireless : 10W
Wire Length	12”
Wire Gauge	18 AWG
Operating Temp	41°F to 95°F (5°C to 35°C)
IP Rating	IP65
UV Stable	Yes

Specification Guide

Base Part #	Bezel Color	Retention Feature
530016	BK – Black	N – N/A

Product Dimensions

Horizontal Phone Pocket Install Instructions
(Part #’s: 530016)

PARTS / TOOLS NEEDED:

Safety/Installation Considerations

Disconnect power before installing, adding or changing any component.
To avoid a hazard to children, account for all parts and destroy all packing materials.
Electrical Specs: Input voltage: 10-30V DC| Input current: 3.4A
Charging Capacity: Wireless only: 10W | Wireless
Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
The charger has been designed to work with Qi compatible devices.
The charger has been designed to charge and operate within the receiving device’s thermal parameters. Low or high temperatures might cause the receiving device to change their charging behavior to regulate its temperature and preserve battery life. Typical temperature ranges are 0ºC to 35ºC (32ºF to 95ºF). When exceeding these operating temperatures, the phone and/or the charging device may temporarily stop charging to protect from overheating.
The wireless charging module has been designed to be optimized with no case installed. If a thick phone case is added to the dis- tance between the charger surface and the phone, it may cause the device to not charge or to temporarily shut down to protect from over-heating.

Determine your installation location, ensuring there is at least 5” of space behind. Cut a 8” x 3¾” hole.
Wire the phone pocket using the wiring diagram.
Install the pocket by sliding the bottom in first, making sure to clear the charger on the bottom of the pocket. Screw in place using the screws provided. Do not over torque screws.
Snap the bezel onto the housing.

385 Thynne Road Morningside QLD 4170
Phone: 61 7 3902 7222
www.samallen.com.au
www.relaxn.com.au

Documents / Resources

| relaxn 530016 Horizontal Phone Pocket [pdf] Instruction Manual
530016, 530016 Horizontal Phone Pocket, Horizontal Phone Pocket, Phone Pocket, Pocket
---|---