INSPIRE CSM.2 Commercial Smith Machine User Manual

: July 16, 2024
: iNSPIRE

Table of Contents

CSM.2 Commercial Smith Machine
Specifications
Product Information
Assembly Instructions
Safety Precautions
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CSM.2 Commercial Smith Machine

Specifications

Model: CSM.2
Manufacturer: Inspire Fitness
Usage: Commercial
Origin: Made in China
Patent: Pending

Product Information

The CSM.2 Commercial Smith Machine by Inspire Fitness is
designed to help you unlock your body’s potential through regular
weight training. It offers benefits such as increased muscle tone,
decreased body fat, improved energy levels, and stress
reduction.

Rust prevention is essential for maintaining the functionality
of the machine, especially in humid environments.

Assembly Instructions

Before Assembling Your CSM:

Read the entire manual carefully before starting assembly.
Verify all parts using the included parts list.
Contact Inspire Fitness Support if any parts are missing.

Safety Precautions

Important Safety Notice:

Consult a physician before starting any exercise program.
Keep children and pets away from the machine during
operation.
Avoid placing hands or feet in the path of moving parts.
If experiencing abnormal symptoms during workout, stop
immediately and seek medical advice.
Position the machine on a flat and open surface.
Avoid using the machine outdoors or near water.
Wear appropriate workout clothing and shoes.
Use the machine only for its intended purpose as described in
the manual.

FAQ

Q: Where can I find replacement parts for the CSM.2
Commercial Smith Machine?

A: If any parts are missing, contact Inspire
Fitness Support for replacement parts via email, phone, or chat as
mentioned in the manual.

Q: Can the CSM.2 be used outdoors?

A: It is recommended not to use the machine
outdoors or near water to prevent damage and ensure safety.

Q: What should I do if I experience dizziness or nausea
while using the machine?

A: Stop the workout immediately and consult a
physician for guidance on your symptoms.

Model # CSM.2

USER MANUAL

START HERE

SMITH QUICKSELECT
COMMERCIAL SMITH MACHINE

Record Serial Number Here

Centr LLC 80009-V2024-04-17

PATENT PENDING

MADE IN CHINA

Pg. 2

80009-V2024-04-17

csm.2
CONGRATULATIONS
Welcome to the Inspire Fitness Family. You’ve just taken the first step to a healthier and stronger body. This CSM, Commercial Smith Machine by Inspire Fitness offers the key to unlocking your body’s potential. Regular weight training has been shown to deliver a host of benefits including: increased muscle tone, decreased body fat, improved energy levels, and a reduction in stress. Congratulations, you are on your way to improving your self image, overall health, and quality of life.
BEFORE ASSEMBLING YOUR CSM
IMPORTANT: Read this entire manual before attempting to build or use this machine. This manual contains step by step instructions for proper assembly.
Use the parts list included in this manual to verify that all parts are accounted for before assembly. If any parts are missing, contact Inspire Fitness Support for replacement parts through email, by phone or through chat.
This Inspire Fitness Smith Machine is intended for Commercial use. Rust can form on certain parts in a humid environment, resulting in impaired function.
CONTACT US FOR HELP
Service of your Commercail Smith Machine should only be performed by an Inspire Fitness Authorized Servicer. Service performed by anyone else can result in loss of warranty. If you need help finding an Inspire Fitness Authorized Servicer, please contact us directly:

Email
Hello@centr.com

Phone
+1 877-738-1729 (US Only) +1 714-738-1729 (Global) Mon-Fri 8am-5pm PT – UTC-7h/8h Support is provided in English and Spanish

80009-V2024-04-17

Pg. 3

Pg. 4

80009-V2024-04-17

csm.2
TABLE OF CONTENTS
IMPORTANT SAFETY NOTICE…………………………………………………………6 IMPORTANT SAFETY INSTRUCTIONS………………………………………………7 GROUND ANCHORING………………………………………………………………….7 WARNING AND SERIAL NUMBER LABELS……………………………………..8 ASSEMBLY HARDWARE KIT………………………………………………………….9 ASSEMBLY INSTRUCTIONS………………………………………………………….12 EXPLODED VIEW…………………………………………………………………………23 PARTS LIST………………………………………………………………………………….24 PRODUCT WARRANTY…………………………………………………………………25

80009-V2024-04-17

Pg. 5

IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. Please note the following safety precautions:
1. Consult your physician before beginning any exercise program 2. Always keep children and pets away from the machine. DO NOT leave children unattended in the same room with the
machine. The linkages on this machine can cause serious injury or death if used improperly. 3. Never place your hands or feet in the path of the linkages because injury may occur to you or damage may occur to
the equipment. Never allow children to come near or approach the moving linkages while in use. 4. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once.
CONSULT A PHYSICIAN IMMEDIATELY. 5. Position the machine on an open and level surface. 6. DO NOT use the machine outdoors or near water. 7. Keep hands away from all moving parts. 8. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become
caught in the machine. Running or training shoes are also required when using the machine. 9. Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended
by the manufacturer. 10. DO NOT place any sharp objects around the machine. 11. Disabled persons should not use the machine without a qualified person or physician in attendance. 12. Before using the machine to exercise, perform stretching exercises to properly warm up.
Care and Maintenance
1. Keep moving parts clean. 2. DO NOT use or store equipment outdoors 3. Inspect and tighten all parts before using the machine. 4. The frame can be cleaned using a damp cloth and mild non abrasive detergent. DO NOT use solvents.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. Health In Motion, LLC. DOES NOT ASSUME ANY RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

Pg. 6

80009-V2024-04-17

csm.2
IMPORTANT SAFETY INSTRUCTIONS
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. Centr LLC. DOES NOT ASSUME ANY RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. THIS MACHINE REQUIRES 2 PEOPLE FOR ASSEMBLY.
SPACE REQUIREMENTS
This Commercial Smith Machine requires a minimum amount of floor space and ceiling height to safely operate. Keep a minimum open area of 20″ (0.5m) behind, and 20″ (0.5m) on both sides.
GROUND ANCHORING
This Commercial Smith Machine SHOULD be bolted to the ground to avoid moving or creeping of the machine while in use with a heavy load.
LIVE AREA
2.7 m 9 ft

2.4 m 8 ft
80009-V2024-04-17

2.4 m 8 ft
Pg. 7

WARNING AND SERIAL NUMBER LABELS

WARNING

PINCH POINT
KEEP HANDS AND FEET
80026-V2023-12-12

WARNING

USE ONLY GENUINE INSPIRE REPLACEMENT PARTS. FAILURE TO DO SO WILL VOID WARRANTY AND COULD RESULT IN SERIOUS INJURY. THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE THE RISK, ALWAYS FOLLOW THESE RULES.

1. PRIOR TO USE, THE USER MUST RECEIVE PROPER INSTRUCTION, AND READ ALL WARNINGS AND INSTRUCTIONS ATTACHED TO THE PRODUCT.
2. INSPECT EQUIPMENT BEFORE EACH USE, DO NOT USE IF THE PRODUCT APPEARS DAMAGED OR INOPERABLE. REPLACE PARTS THAT SHOW ANY WEAR OR DAMAGE. IF IN DOUBT ABOUT A CERTAIN PART, DO NOT USE THE EQUIPMENT UNTIL THE PART IS REPLACED, FAILURE TO REPLACE WORN OR DAMAGED PARTS MAY RESULT IN INJURY.

3. FOLLOW MAINTENANCE SCHEDULED ON THE “NOTICE” STICKER.

4. CONSULT YOUR PHYSICIAN BEFORE STARTING ANY EXERCISE PROGRAM. WARM UP PROPERLY BEFORE EXERCISING. STOP EXERCISING IF YOU FEEL FAINT OR DIZZY.

5. TO PREVENT THE POSSIBILITY OF SERIOUS INJURY, KEEP CLEAR OF ALL MOVING PARTS. DO NOT ATTEMPT TO FREE ANY JAMMED PART BY YOURSELF. OBTAIN ASSISTANCE IN ORDER TO AVOID POSSIBLE INJURY.

6. TAKE YOUR TIME AND DO NOT RUSH EXERCISE. PRACTICE PROPER BREATHING NEVER HOLD YOUR BREATH.
7. CHILDREN SHOULD NOT BE ALLOWED TO USE THIS EQUIPMENT. TO AVOID POSSIBLE INJURY, CHILDREN SHOULD BE KEPT AT A SAFE DISTANCE WHEN THIS EQUIPMENT IS IN USE. TEENAGERS SHOULD NOT USE THIS EQUIPMENT WITHOUT ADULT SUPERVISION.
8. CALL YOUR AUTHORIZED CENTR DISTRIBUTOR IF YOU HAVE ANY QUESTIONS ON THE PROPER USE OR MAINTENANCE OF THIS EQUIPMENT.

9. MAKE SURE ALL PULL PINS, LOCKS, AND SAFETY LATCHES ARE IN PLACE AND FULLY ENGAGED BEFORE EACH USE.
10. NEVER PIN THE WEIGHT STACK OR TOP PLATE IN AN ELEVATED POSITION. A MACHINE MUST NEVER BE USED IF FOUND IN THIS CONDITION FOR SELECTORIZED STRENGTH EQUIPMENT THAT EMPLOYWEIGHTSTACKS .
11. TO INCREMENTALLY INCREASE THE WEIGHT RESISTANCE, USE ONLY INCREMENTAL RESISTANCE MEANS PROVIDED BY THE MANUFACTURER.

12. NEVER USE THE MACHINE FOR SUPPORT DURING STRETCHING OR TO ATTACH AND USE RESISTANCE STRAPS, ROPES, OR OTHER MEANS UNLESS ALLOWED BY THE MANUFACTURER.

13. KEEP BODY, CLOTHING, AND FITNESS ACCESSORIES CLEAR OF ALL MOVING PARTS.

14. INSPECT THE EQUIPMENT BEFORE USE AND DO

REPLACE LABEL IF DAMAGED, ILLEGIBLE,

OR REMOVED.

80072 V2024 01 10

WARNING

PINCH POINT
KEEP HANDS AND FEET
80026-V2023-12-12

Pg. 8

This product covered by one or more of the following US Patents and others pending: 5,330,405; 5,944,641; 5,961,427; 7,645,217; 7,722,513; 7,837,600;
7,905,818; 8,096,929; 8,870,718; 9,067,100; 9,302,139

80009-V2024-04-17

ASSEMBLY HARDWARE KIT
CSM-2 103444
15 STEP1

csm.2
14

6-M10x125 Hex Bolts – (15) 8-M10x25 Hex Bolts – (14) 20-M10 Flat Washers -(12) 6-M10 Locknuts -(13)
STEP2
4- Countersunk Flat Cushion -(16) 4-M8x20 Flat Head Screws -(17) 4 – M8 x 20 Button Head Bolts -(52) 4 – M8 Flat Washers -(31)

17

16 52

80009-V2024-04-17

HARDWARE PACK (NOT TO SCALE)

Pg. 9

ASSEMBLY HARDWARE KIT

STEP3

4-M10x90 Hex Bolts -(21) 8-M10 Flat Washers-(12)

CSM-2 103445

4-M10 Locknuts -(13) 8 – M6*5 Set Screws-(18)

18

21

25

STEP4
4 – M10 x40 Hex Bolts-(25)

8- M10 Flat Washers-(12)

4 – M10 Locknuts -(13)

4 – M6*5 Set Screws -(18)

18

STEP5
8 – Limit buckle-(29)

29

39 30

38

36
STEP6
8 – M10 x 20 Hex Bolts-(35) 1 – M10 x 80 Hex Bolts-(38) 2 – M10 x 95 Hex Bolts-(39) 1 – M10 x 125 Hex Bolts -(15) 10 – M10 Flat Washers-(12) 8 – M8 x 16 Button Head Bolts-(30) 8 – M8 Flat Washers-(31) 2 – Hat Washers-(36)

15 35

Pg. 10

HARDWARE PACK CONTINUED (NOT TO SCALE SCALE)

80009-V2024-04-17

ASSEMBLY HARDWARE KIT
CSM-2 103446

39 30

38

STEP7
8 – M10 x 20 Hex Bolts-(35) 1 – M10 x 80 Hex Bolts-(38) 2 – M10 x 95 Hex Bolts-(39) 1 – M10 x 125 Hex Bolts -(15) 10 – M10 Flat Washers-(12) 8 – M8 x 16 Button Head Bolts-(30) 8 – M8 Flat Washers-(31) 2 – Hat Washers-(36)
15

36

35

csm.2

41

42

44

STEP9 30
8-M8 x 16 Button Head Bolts-(30) 8-M8 Locknuts-(49)

43
STEP8
6 – M5 x 15 Cap Screws-(41) 2 – M5 x 40 Cap Screws-(42) 2 – M5 x 65 Cap Screws-(43) 2 – M5 x 115 Cap Screws-(44) 12 – M5 x 14 Cylinder Nuts-(40)

80009-V2024-04-17

HARDWARE PACK CONTINUED (NOT TO SCALE)

Pg. 11

FRAME ASSEMBLY
STEP 1-A Assemble Lower Cross Brace (1) to Main
Frame Left (7), secure with Bolt (15), Washer (12) and Nut (13).DO NOT FULLY TIGHTEN YET.

STEP 1-B Assemble Lower Cross Brace (1) to Main
Frame Right (6), secure with Bolt (15), Washer (12) and Nut (13). DO NOT FULLY TIGHTEN YET.

7 15
12 1
12 13

6
12 15
13 12
7 1

STEP 1-C. Install Upper CrossBar (10) to the Upright
frame on Rear side, Secure with Bolt (14), Washer (12). DO NOT FULLY TIGHTEN YET.

STEP 1-D Install Upper CrossBar (10) to the Upright
frame on Front side, Secure with Bolt (14), Washer (12). FULLY TIGHTEN all hardware at this point.

10 14 10
12

12 14 12

14

12

Pg. 12

80009-V2024-04-17

TRACK BAR INSTALLATION
STEP 2-A Install TUBULAR Rack (3) to Sliders Left
and right side, secure with Bolt (17), Washer (16). Secure in place.

csm.2
STEP 2-B Install Bolt (52) , Washer (31)
To Secure in place.

3
31 52 16

17 16

If needed.
The trackbar can be adjusted in and out by turning the threaded spacer.

80009-V2024-04-17

Pg. 13

GUIDE ROD AND SMITH BAR INSTALLATION
INSTALL SET SCREWS TOP

21 18

8
STEP 3 A. Slide a Rod Slider (20) thru the upper

holes of the frame.

12
STEP 3 B. Slide Rod Mount (8) On each guide

bar, then Fasten Brackets (8) with Bolt (21),

13

Washers (12), LockNuts (13).

20
STEP 3 C. Lift Rod Slider (20) and position Weight Bar/ Slider/Rotating/Stop (11) and Rubber Donuts (19) on Each side, then Slide Guidebars into bearings and Rubber Bumpers.
11

STEP 3 D. Once GuideBars are set in place, Fasten Set
19
Screws (18) at top and bottom of Frame.

18

21
8 12 13 20

INSTALL SET SCREWS BOTTOM

Pg. 14

80009-V2024-04-17

INSTALL WEIGHT PLATES

csm.2

STEP 4 A. Insert the Guide Rods (24) through the holes in the bottom of the frame. Be sure the ends of the rods with the
24
holes are facing Up.

STEP 4 B. Slide a Rubber Bumper (23) on each of the Guide

22

Rods (24). let them rest at bottom of Guide Rod.

STEP 4 C. Let the Guide Rods (24) rest at an angle in the

54

frame. Using the provided lubricant, spread the liquid up

and down the guide rods. Then slide on 20 Weight Plates
53 (54) with the sticker cut out facing towards the inside of

the machine and the protruding pads on the weights facing

downward.

STEP 4 D Next slide on the Top Weight/Selector Stem (53) . then place Weight Stack Pin (22) on top

23

12

STEP 4 E. Align GuideRods with top holes on the

13

frame, and secure in place with Bolt (25) Washer(12,

Nut (13)

STEP 4 F. Secure Weight Stack Pin (22) to Top Weight/ Selector Stem (53) by threading in the cable end in place. Fasten Screws (18) to Weight Stack Pin (22) and Top Weight/Selector Stem (53)

25 12

18
53
REPEAT FOR OPPOSITE SIDE.
80009-V2024-04-17

12 13
Pg. 15

COUNTER WEIGHTS INSTALLATION
STEP 5 A. Install Counterweight cable (58) to Weight bar (11) with U Braclet(55), Bolt (56) and Bolt (57). Then move Weight Bar (11) to its highest position.

58

56

11

55

57

Pg. 16

STEP 5 B. Set Counter Balance Weight (9) At bottom of the frame, next to the weightstack. Pull cable to its lowest position, then Install Cable and pulley to counter weight. STEP 5 C. Fasten with Bolt (26), Washer (12), and Nut (13). When lowering the Weight bar, the counter balance weight should move up. Repeat for opposite side.
27 13
12 26
9
PLACE COUNTER WEIGHT AT BOTTOM OF FRAME
REPEAT FOR OPPOSITE SIDE.
80009-V2024-04-17

csm.2 GUIDE CABLES TOP
STEP 5 D. Install Counter Weight Guide Cable (28) 2 per side. Install at top first, then tension at bottom. STEP 5 E. Install Grommets (29) on cable guides, then push into counter weights.
INSTALL GROMMETS
GUIDE CABLES BOTTOM

80009-V2024-04-17

Pg. 17

STEP 6-A Install 3 Upper Leveling Brackets (5) Bolts (35) Washer (12) to build Shroud Mount Loop (2) for top.
1 for left side, 1 for right side. Hand tighten bolts.

2
35 12 5

2
35
12 5

STEP 6-B Install Rear Upper Shroud Mount brakets (4) (LEFT AND RIGHT SIDE) to the Upright Frames with Bolt
(15), Screw the Upper Leveling Brackets with the Bolts (30) and the Washers (31). Install 2 Bolts (39), 1 Bolt (38) with the Washers (12) to the frame and the brackets. Leave the Bolts (15)(38)(39) loose , they will be tensioned after shroud installation.

15

39

12

4

30 31

38 12

Pg. 18

80009-V2024-04-17

csm.2 STEP 6-C Install 2 Bolts (35) with Spacers (36) to build Shroud Loop (2) for Lower frame. 1 for left side, 1 for
right side. Hand tighten bolts.
35 2
36
2

STEP 6-D Install Lower Shroud Mount brakets (37) to the Upright Frames with Bolts (35) and Washers (12)
on two sides. Make sure side Bolts (35) and Spacers (36) are located correctly on the Bracket. Fasten Bolts (35) Washer (12) , Side Bolts (30) Washer (31) to the Main Frame. 1 for left side, 1 for right side. Hand tighten bolts.
30 31

31 30

37 12
35

80009-V2024-04-17

35 12
Pg. 19

STEP 7 A Install Main Shroud(32) Wraps on the OUTSIDE of the frame. Open the velcro and wrap around upper, and then Lower Bracket.
STEP 7 B Install Rear Shroud(33) Wraps on the INSIDE of the frame. From the Right of the weightstack to the back

STEP 7 C Install Middle Shroud(34) This

is the shortest piece. Wraps on the inside

from the left of the weightstack towards

the front of the frame.

32

VELCRO
33 34

VELCRO STEP 7 D With all Shrouds in place, tension covers by turning bolts (15)(38)(39) at top of the frame.

39

15

38 15
39
38

Pg. 20

80009-V2024-04-17

TOP COVER INSTALLATION

csm.2

STEP 8 A Install Inner Right Top Cover (46) and Outer RightTop Cover(47). Locate where the 2 pieces will go, secure using Bolts (41)(43)(44)(47)(23), and Threaded Cylinders (40) on opposite side. as illustrated below.
STEP 8 B Repeat installation process for opposite side for Inner Left Top Covers (45) and Outer Left Top Cover (48).

41

44

47

43 23

46 40 45

48 44

43 41
23

80009-V2024-04-17

Pg. 21

PLACARDS INSTALLATION
STEP 9 Install Placards (50) and (51) to right and left inner part of shroud. Use Bolt 30, LockNut (49) to secure in place. There are 2 different placards, one for Left side, one for Right side.
49
50 51 30

50

51

CHEST PRES S

SCAN FOR EXERCISE DEMO
1
2

3 4

SQUAT
1
3

Pg. 22

80025-V2024-01-05

80024-V2024-01-05

SCAN FOR EXERCISE DEMO
2
4
80009-V2024-04-17

Pg. 23

80009-V2024-04-17

41

44

43

47 46
40

41 13

42

15

12

38 12 5 2

5 35 35

30 39
12

12

4

30

12

21 12

31

12

13

49

50

6
12 25
58

3 30

13 12

30

12 37

32

33

35

34
35 35 12

20

65 19

30 31

67 64

12

36

30 59

2 60 66

52 31
57 55 56

16 17

37 12

35

11

103444

CSM-2 103444

15 STEP1

14

6-M10x125 Hex Bolts – (15) 8-M10x25 Hex Bolts – (14) 20-M10 Flat Washers -(12) 6-M10 Locknuts -(13)
STEP2
4- Countersunk Flat Cushion -(16) 4-M8x20 Flat Head Screws -(17) 4 – M8 x 20 Button Head Bolts -(52) 4 – M8 Flat Washers -(31)

17

16 52

103445

STEP3

4-M10x90 Hex Bolts -(21) 8-M10 Flat Washers-(12)

CSM-2 103445

4-M10 Locknuts -(13) 8 – M6*5 Set Screws-(18)

18

21

25

STEP4
4 – M10 x40 Hex Bolts-(25)

8- M10 Flat Washers-(12)

4 – M10 Locknuts -(13)

4 – M6*5 Set Screws -(18)

18

STEP5
8 – Limit buckle-(29)

29

39 30

36
STEP6

38

8 – M10 x 20 Hex Bolts-(35) 1 – M10 x 80 Hex Bolts-(38) 2 – M10 x 95 Hex Bolts-(39) 1 – M10 x 125 Hex Bolts -(15) 10 – M10 Flat Washers-(12) 8 – M8 x 16 Button Head Bolts-(30) 8 – M8 Flat Washers-(31) 2 – Hat Washers-(36)

15 35

103446

39 30

CSM-2 103446

38

STEP7
8 – M10 x 20 Hex Bolts-(35) 1 – M10 x 80 Hex Bolts-(38) 2 – M10 x 95 Hex Bolts-(39) 1 – M10 x 125 Hex Bolts -(15) 10 – M10 Flat Washers-(12) 8 – M8 x 16 Button Head Bolts-(30) 8 – M8 Flat Washers-(31) 2 – Hat Washers-(36)

36

15

35

41

42

44

STEP9 30
8-M8 x 16 Button Head Bolts-(30) 8-M8 Locknuts-(49)

43
STEP8
6 – M5 x 15 Cap Screws-(41) 2 – M5 x 40 Cap Screws-(42) 2 – M5 x 65 Cap Screws-(43) 2 – M5 x 115 Cap Screws-(44) 12 – M5 x 14 Cylinder Nuts-(40)

24 29 12 13 22
53
54

12

28

27

10

29

26

24

12 14
16 14

9

25

12

21 12
8 18
12 13 1
12 15 3
15

12

13

58

23
57 55 56
66

20

12

17 16

35 12
17

52 16 31 18
12
19

60 59 64

67 65

37
37 12 35

EXPLODED VIEW

14
12 40 45 48

41

7

44

41

43 41
15

39 30

42

31

28

38

12

5

12 30
31

29

35

2

24

35

27

29 12

12 26

5

12

30

49

33

34

22

32

13

53

30 51

12 13

23 30
31
35 36 35
2 12

csm.2

Pg. 24

No.

Description

1

WLDMT, LOWER CROSS BRACE

2

WLDMT, SHROUD LOOP, CSM2

3

TUBE, TUBULAR RACK

4

WLDMT, REAR UPPER SHROUD BRACKET, CSM2

5

UPPER LEVELING BRACKET, CSM2

6

ASSY, MAIN FRAME, RH

7

ASSY, MAIN FRAME, LH

8

ASSY, SLIDE ROD MOUNT, CSM2

9

WLDMT, COUNTER BALANCE WEIGHT, CSM2

10

WLDMT, UPPER CROSSBAR

11

ASSY, SMITH WEIGHT BAR

12

WASHER, FLAT, 10.5 X 20 X 2, BZ

13

NUT, M10 X 1.5 X 10, LOCK, CL8, BZ

14

BOLT, M10 X 1.5 X 25, HH, CL 8.8, BZ

15

BOLT, M10 X 1.5 X125, HH, CL 8.8, BZ

16

WASHER, TUBULAR RACK

17

BOLT, M8 X 1.25 X 20, FH, CL 10.9, BZ

18

SCREW, M6 X 1.0 X 5, SET, CUP, BZ

19

RUBBER DONUT, 25 ID

20

ROD, SLIDER, 25 OD X 2080L

21

BOLT, M10 X 1.5 X 90, HH, CL 8.8, BZ

22

ASSY, WEIGHT STACK PIN-LANYARD

23

RUBBER DONUT, 60 X 20 X 28

24

GUIDE ROD, 2100MM, CSM2

25

BOLT, M10 X 1.5 X 40, HH, CL 8.8, BZ

26

BOLT, M10 X 1.5 X 50, HH, CL 8.8, BZ

27

ASSY, 3″ CABLE PULLEY

28

ASSY, GUIDE CABLE, 2156, CSM2

29

GROMMET, 16 OD

30

BOLT, M8 X 1.25 X 16, BH, CL 10.9, BZ

31

WASHER, FLAT, 8.5 X 16 X 1.6, BZ

32

SHROUD, MAIN, CSM2

33

SHROUD, REAR, CSM2

34

SHROUD, MIDDLE, CSM2

35

BOLT, M10 X 1.5 X 20, HH, CL 8.8, BZ

36

SPACER, STEP, SHROUD, CSM2

37

BRACKET, LOWER SHROUD MOUNTING, CSM2

38

BOLT, M10 X 1.25 X 80, HH, CL 8.8, BZ

39

BOLT, M10 X 1.5 X 95, HH, CL 8.8, BZ

40

NUT, SOCKET, M5 X 0.8 X 11, BZ

41

BOLT, M5 X 0.8 X 15, SH, CL 12.9, BZ

42

BOLT, M5 X 0.8 X 40, SH, CL 12.9, BZ

43

BOLT, M5 X 0.8 X 65, SH, CL 12.9, BZ

44

BOLT, M5 X 0.8 X 115, SH, CL 12.9, BZ

45

ASSY, INNER TOP COVER, LH, CSM2

46

ASSY, INNER TOP COVER (W/CUTOUT), RH, CSM2

47

ASSY, OUTER TOP COVER, RH, CSM2

48

ASSY, OUTER TOP COVER, LH, CSM2

49

NUT, M8 X 12.5 X 8, LOCK, CL 8, BZ

50

PLACARD, SQUAT, INSPIRE, CSM2

51

PLACARD, CHEST PRESS, INSPIRE, CSM2

52

BOLT, M8 X 1.25 X 20, BH, CL 10.9, BZ

53

ASSY, TOP WEIGHT/SELECTOR STEM

54

WEIGHT, PLATE, 10LBS

55

BRACKET, U, CABLE END

56

BOLT, M6 X 1.0 X 12, BH, CL 10.9

57

BOLT, INTERNAL THREAD, M10 X 22

58

CABLE, COUNTER BALANCE, 5560

59

ASSY, SMITH LINEAR BEARING

60

ASSY, ROTATING/STOP PIN

61

HARDWARE CARD 1, CSM2

62

HARDWARE CARD 2, CSM2

63

HARDWARE CARD 3, CSM2

64

WEIGHT BAR END CAP

65

BOLT, M10 X 1.5 X 20, FH, CL 10.9, BZ

66

BOLT, M10 X 1.5 X 30, FH, CL 10.9, BZ

67

NUT, M10 X 1.5 X 10, LOCK, CL 8, BZ

Part Number

Qty

102451

1

102593

4

102550

2

102598

2

102601

6

102455

1

102538

1

102576

2

102584

2

102547

2

102554

1

102390

62

102391

14

102660

8

102650

8

102551

4

102552

4

102520

4

102580

2

102575

2

102651

4

102620

2

102582

4

102581

4

102661

4

102652

2

102535

6

102589

4

102588

8

102665

24

102393

20

102604

2

102606

2

102605

2

102666

16

102597

4

102596

4

103368

2

103369

4

102670

12

102671

6

102672

2

102673

2

103374

2

102615

1

102611

1

102607

1

102613

1

103128

8

80024

1

80025

1

102392

4

102621

2

102626

40

102656

2

102659

2

102657

2

102537

2

102558

2

102564

2

103444

1

103445

1

103446

1

102571

2

102572

4

102573

6

102391

6

80009-V2024-04-17

PRODUCT WARRANTY
To view full warranty details, or to register your product for warranty, visit inspirefitness.com/support

csm.2

AUSTRALIA
Our goods come with guarantees that cannot be excluded under the Australian Consumer. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled: · to cancel your service contract with us; and · to a refund for the unused portion, or to compensation for its reduced value. You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.

80009-V2024-04-17

Pg. 25