KOHLER K-707002-D3 Frameless Sliding Bath Door Owner’s Manual
- July 16, 2024
- Kohler
Table of Contents
KOHLER K-707002-D3 Frameless Sliding Bath Door
Specifications:
- Product : Frameless Sliding Bath Door K-707002-D3
- Available Colors/Finishes:
- Bright Polished Silver Anodized (SHP)
- Dark Bronze Anodized (ABZ)
- Brushed Nickel (BNK)
- Available Glass Options : Frosted (D3)
- Dimensions:
- Height Range: 56-5/8″ (Min) to 59-5/8″ (Max)
- Width : 59-1/16″
- Base-To-Wall: 3/8″
- Shower Ledge Min: 2-1/2″
- Shower Wall Min: 2-1/2″
Product Usage Instructions
Installation:
- Install the product according to the provided installation guide.
- Ensure a vertical opening of at least 64-1/2″ to allow clearance for installing the top track over the wall jambs.
- Check that the wall jambs, made of clear plastic, do not cover existing shower door holes.
Cleaning and Maintenance:
The frameless sliding bath door is equipped with technology that repels water,
soap scum, and residue, making cleaning easy. Follow these steps for cleaning:
- Regularly wipe the outside of the door with a microfiber cloth to maintain cleanliness.
- Avoid using harsh chemicals or abrasive materials that may damage the protective coating.
- For tougher stains, use a mild soap solution and rinse thoroughly with clean water.
Notes:
- All product dimensions are nominal.
- The vertical opening should be a minimum of 64-1/2″ for installation clearance.
Features
- Frameless, heavy 5/16″ (8 mm) thick Frosted tempered glass
- Center-guided mechanism for smooth, quiet sliding action and easy cleaning
- Contemporary towel bar and knob combination offers storage on the outside of the door without encroaching on the bathing space
- CleanCoat®+ glass coating creates a hydrophobic barrier that repels water, soap scum, and residue, saving time and protecting shower doors 10 times longer than original CleanCoat. (Based on 2021 internal wear/abrasion testing using a microfiber cloth.)
- Tempered glass ensures enhanced safety and durability
Technology
- Frameless design with minimal metal allows for greater ease of cleaning
- Low bottom track creates easy entry and exit to the bathing space
Installation
- Out-of-plumb adjustability simplifies installation
- Sliding bath door
- Not for use in hospitality
Codes/Standards
- ANSI Z97.1
- CAN/CGSB-12.1
- CPSC 16CFR 1201
KOHLER® Bath and Shower Doors Ten-Year Limited Warranty
See the website for detailed warranty information.
DIMENSION
Technical Information
All product dimensions are nominal.
- Base-To-Wall: Radius – Max: 3/8″ (10 mm)
- Shower Ledge Min Flat: 2-1/2″ (64 mm)
- Shower Wall Min Flat: 2-1/2″ (64 mm)
Notes
- Install this product according to the installation guide.
- Wall jambs are made of clear plastic and may not cover existing shower door holes.
- NOTICE : The vertical opening should be a minimum of 64-1/2″ (1638 mm) to allow clearance for installing the top track over the wall jambs.
- The vertical opening should be a minimum of 64-1/2″ (1638 mm) to allow for installation clearance
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 6-12-2024 20:41 – US
FAQ
Q: Can I use abrasive cleaners on the glass?
A: It is recommended to avoid abrasive cleaners as they may damage the
protective coating on the glass. Use a mild soap solution for cleaning.
Q: What if the wall jambs cover existing shower door holes?
A: If the wall jambs cover existing holes, adjustments may be needed during
installation to ensure proper fit and functionality of the sliding bath door.