ARCHIPELAGO LLHB Titan II Cutting Edge LED Linear Installation Guide

ARCHIPELAGO LLHB Titan II Cutting Edge LED Linear

Specifications:

• Model: LLHB Titan-II
• Dimming Functions: Constant current, PWM signal, Variation of resistance unit
• Installation Locations: Suitable for indoor environments
• Not Suitable for: Corrosive gas liquids or high-pressure water vapor environments

Product Usage Instructions:

Installation Guide
Before starting the installation process, please read all the instructions carefully.

Pre-Installation Checks

• Confirm that the working environment aligns with the product specifications.
• Ensure the input voltage and frequency match the requirements.
• Use professional personnel for installation.
• Do not use the product if the power cord or case is damaged.
• If external cables are damaged, replace them with help from qualified personnel.
• Consult an electrician to ensure correct branch circuit conductor.

Dimming Functions
Three dimming functions are available:

1. Constant current achieved by 0/1-10VDC dimming.
2. PWM signal dimming.
3. Variation of resistance unit dimming.

Wiring Instructions
Follow these wiring instructions:

• L: Black
• N: White
• Green/Yellow: Dim +
• Dim -: Dim –
• Note: Check the light label for wire color of DIM+ and DIM -.

Installation Steps

1. Hook up the cable.
2. Connect the cable with the fixture.
3. Fix the cable on the rail and adjust its length as needed.
4. Choose a suitable wiring knock out and connect wires according to local standards and codes.

FAQ

• Q: Can this product be used in high-pressure water vapor environments?
  A: No, this product is not suitable for environments with high-pressure water vapor or corrosive gas liquids.

• Q: What should be done if the power cord is damaged?
  A: If the power cord is damaged, do not use the product and seek professional help to replace it.

• Q: How many dimming functions are available in this high bay light?
  A: Three dimming functions are available: constant current, PWM signal, and variation of resistance unit dimming.

Please read all the instructions before attempting installation

• Please read the product specification carefully first to confirm that the working environment is in line with the condition on the specification before it is used.
• Please confirm the input voltage and frequency before use.
• The light must be installed by professional personnel
• If the power cord and case of the products are damaged, it will be regarded as disqualified product and should not be used.
• If external soft cable or wire of the product is damaged, the wire should be replaced by manufacturer or service agent or personnel with similar qualification to avoid danger.
• This luminaire is designed to operate in ambient temperatures ranging from -22°F to 158°F and to be horizontally mounted facing down.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
• This product is not available for several special environments, such as places with corrosive gas liquids or high pressure water vapor.
• CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR
• CAUTION – RISK OF FIRE

Wiring Diagram & Instruction

3 dimming functions are available in this high bay light:

1. Constant current can be achieved by 0/1-10VDC dimming.

2. PWM signal dimming.

3. Variation of resistance unit dimming.
   Wiring Instructions:

   • L: Black
   • N: White
   • Green/Yellow
   • Dim +
   • Dim –

Note: For wire color of DIM+ and DIM – please check the light label.

Installation Guide

1. Mount the bracket on 3/4” NPT (Fig. 2)
2. Lock the fixture on the bracket (Fig. 3).
3. Connect the wires according to local standard and code.
4. Lock side brackets with screw driver (Fig. 4)

| | |
⚙ Installation Instructions| ⑃ Surface Bracket Mount
Note: If this bracket is used the backup driver solution cannot be use.

1. Mount the bracket on the rail or ceiling (Fig. 5).
2. Assemble the lamp on the bracket and fix it with screws (Fig. 6).
3. After mounting, choose suitable wring knock-out and connect the wires according to local standard and code.

| |
⚙ Installation Instructions| ⫦ Wire Guard
Note: Purchase the correct size wire guard from manufacturer.

1. Place the wire guard on the lamp and fix it with screws (Fig. 7).

|
⚙ Installation Instructions| 〶 Motion Sensor / PIR Sensor
---|---
Note: Both sensors are with the same installation.

1. Connect the wires according to the wiring diagram (Fig. 8).

|
⚙ Installation Instructions| 〶 DC Motion Sensor / PIR Sensor
Note: Both sensors are with the same installation.

1. Use a screwdriver to remove the 1/2 plug from the sensor (Fig. 9).
2. Twist-lock the DC sensor to the base to make it work properly, use a remote control to adjust the working mode as per demand (Fig. 10)

| |
⚙ Installation Instructions| 〶 Backup Diver
---|---
Part 1

1. Open junction box with screw driver.
2. Connect the input wires on each backup driver and fixture driver via suitable knockout, then complete the junction.

|
Part 2

1. Assemble the bracket onto the back of the light fixture.
2. Assemble the emergency power supply to the bracket, and then connect according to the wiring mode.

|
CCT & Wattage Adjustment

Wattage adjustment switch + CCT tunable switch

|

Headquarter: 4615 State Street, Montclair, CA 91763
USA Production: 9345 Sycamore Canyon Blvd, Riverside, CA 92508
www.archipelagolighting.com
+1 866-912-3220

References

• Archipelago Lighting: Lighting | Reinvented

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>