PHILIPS LUM11071AU70X2-20 Ultinon SI Car And Truck Signaling Bulb Owner’s Manual
- July 16, 2024
- Philips
Table of Contents
PHILIPS LUM11071AU70X2-20 Ultinon SI Car And Truck Signaling Bulb
Product Information
The Philips Ultinon Pro7000 SI Car and Truck Signaling Bulb is designed to provide lasting brightness for a safer drive. It offers intense amber light that enhances visibility, making your signals stylish and safe. The bulb features powerful brightness, instant-on technology, uniform light distribution, and a lifetime of up to 5,000 hours.
Specifications:
- Product: Philips Ultinon Pro7000 SI Car and Truck Signaling Bulb
- Type: LED-AMBER [WY21W]
- Number of Bulbs: 2
- Voltage: 12/24V
- Color: Intense Amber
- Advanced Automotive System
Product Usage Instructions
Installation:
- Ensure the vehicle is turned off and the bulbs are cool to the touch before starting.
- Locate the existing turn signal bulbs on your vehicle.
- Remove the old bulbs by twisting them counterclockwise and pulling them out.
- Insert the new Philips Ultinon Pro7000 bulbs into the socket and twist them clockwise to secure them in place.
- Repeat the process for the other bulb if needed.
- Turn on your vehicle to test the new bulbs. Make sure they illuminate properly.
Maintenance:
Ensure the bulbs are clean and free of debris to maintain optimal performance.
Check the bulbs periodically for any signs of damage or dimming, and replace
them if necessary. Avoid touching the glass part of the bulb with your bare
hands as oils from your skin can affect its longevity.
FAQ:
-
Q: Can these bulbs be used in all vehicles?
A: The Philips Ultinon Pro7000 bulbs are electrically compatible with most cars and trucks, working within 9-32 volt systems. Canbus adapters are available for troubleshooting if needed. -
Q: Are these bulbs polarity-sensitive during installation?
A: No, the bulbs feature a polarity-free design, allowing for a plug-and-play installation experience without having to worry about polarity.
FEATURE
Brighter, elegant signals
For a stylish and safe drive, upgrade to Philips Ultinon Pro7000 LED-AMB
[≈W21W] for your front and rear turn signals. Their intense amber color looks
great and increases visibility so you can signal safely and stylishly
- Superior visibility for safer driving
- Signal your intent with brighter exterior lighting
- Instant safety information for other drivers
- Ergonomic design with 360° beam pattern
- High-end, stylish signaling
- Upgrade your lights, upgrade your style.
- Performance made to last
- An enhanced lifetime of up to 5,000 hours
- Aluminum heatsink to dissipate heat more efficiently
- Simple plug-and-play replacement
- Easy to install and compatible with most car models
- Constant IC driver ensures electrical compatibility with mos
- Easy to install on your car
Highlights
-
Powerful brightness
Signaling the intended movement of your vehicle is vital to your safety. To avoid collisions, other people need to know what you’re doing. And when poor weather reduces visibility, the need for bright and vibrant signaling becomes even greater. Philips Ultinon Pro7000 LED signaling lights provide intense amber light with 15 LEDs for your turn indicator signals. They will help other drivers to see you better, which is vital for them to react sooner. The earlier you are seen, the safer your drive will be! -
Instant-on technology
Compared to incandescent lamps, Philips Ultinon Pro7000 LEDs light up instantly to ensure that other drivers can react faster, keeping you safer. -
Uniform light distribution
For your turn indicator, reverse, rear fog, and stop signals, the Philips Ultinon Pro7000 LED gives you uniform light distribution. Its 360 angle ensures that the light is projected where you need it. Not only can you see more of the road, but other drivers can also see more of you. -
Elegant LED light
While the main goal of exterior lighting is to help you see and be seen, there’s no reason why you shouldn’t look good at the same time. If you want to upgrade your style without buying a newer car, replacing your exterior lighting with Philips Ultinon Pro7000 LED signals is a smart way to spend your money. -
Lifetime of up to 5,000 hours
You want bright, stylish car lights but you don’t want to keep replacing failed lamps. That’s a major weakness of conventional bulbs – the more powerful the light, the shorter its lifespan. Even at a higher light intensity, LEDs last much longer. Philips Ultinon Pro7000 LED lights are built to last. Due to features such as high-end LED technology and advanced heat management systems, they last for up to 5,000 hours of operation. -
Super-robust lamps with aluminum material
When operating, LEDs generate heat which reduces their brightness and overall lifespan. Philips Ultinon Pro7000 LED lights feature an aluminum heatsink which dissipates heat much faster than the plastic material used by low-cost, inferior-quality bulbs. That makes our lamps more robust and long-lasting. -
Ready, steady, installed!
Enjoy the plug-and-play experience: Philips Ultinon Pro7000 LED lights use the same standard caps as the conventional lamps on your car, enabling you to upgrade with no modification needed, so replacement is easy and quick. -
Electrical compatibility with most cars and trucks
LED retrofit and conventional bulbs differ from one another in terms of wattage, composition, and power consumption. Replacing your conventional bulbs with other LEDs may prove problematic. Thanks to the built-in constant IC driver, Philips Ultinon Pro7000 bulbs can work within 9-32 volt systems and are electrically compatible with most cars and trucks. Canbus adapters are available as accessories for troubleshooting if needed. We sell a complete solution. -
Polarity-free design
Enjoy the plug-and-play experience: the Philips Ultinon Pro7000 comes with a polarity-free design, so you don’t need to worry about the polarity during installation. It will save you time and make installation easier.
Specifications
Marketing specifications
- Product highlight: Polarity-free, Automotive Grade LED, Powerful brightness, Uniform light distribution
- Expected benefits: Brighter, elegant signals
Product Description
- Application: Front turn indicator lights and rear turn indicator lights
- Base: Universal wedge base
- Designation: WY21W LED 11071 AU70 12/24V X2
- Homologation ECE: NO
- Range: Ultinon Pro7000 SI
- Technology: LED
- Type: LED-AMB [≈W21W]
- Voltage: 12V+24V V
Lifetime
- Lifetime: 5000 hrs
Light Characteristics
- Lumens: 250lm(12V) 310lm(24V)
- Color temperature: AMBER
Electrical characteristics
- Wattage: 3.2W(24V), 2.5W(12V) W
- Voltage: 12V+24V V
Ordering information
- Order entry: 11071AU70X2
- Ordering code: 72667030
Packaging Data
- EAN1: 6974260726670
- EAN3: 6974260726687
- Packaging Type: X2
Packed product information
- Length: 7,0 cm cm
- Width: 2,5 cm cm
- Height: 11,5 cm cm
- Pack Quantity: 2 pcs
- MOQ (for professionals): 10 packs
- Gross weight per piece [g]: 40
Outerpack information
- Length: 19,5 cm cm
- Width: 15,5 cm cm
- Height: 8,5 cm cm
- Gross weight [kg]: 0,46
Issue date 2024-03-14
Version: 1.1.1
EAN: 69 74260 72667 0
© 2024 Koninklijke Philips N.V.
All Rights Reserved.
Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips N.V. or their respective owners.
www.philips.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>