Fire Angel FP1640W2-R Multi Sensor Smart Smoke Alarm User Guide
- July 15, 2024
- Fire Angel
Table of Contents
Fire Angel FP1640W2-R Multi Sensor Smart Smoke Alarm
Product Information
Specifications
- Model: FP1640W2-R
- Power Requirement: 230V mains electrical circuit
- Compatibility: FireAngel Pro Connected range
Product Usage Instructions
Installation
- An electrician must install the base plate into your home’s 230V mains electrical circuit.
- Attach the device head to the base plate after any renovations or decorating are completed.
- Ensure the FP1640W2-R is interconnected only with other alarms in the FireAngel Pro Connected range.
Troubleshooting and Maintenance
- If the alarm is incorrectly attached to the baseplate, detach and reattach it following steps 1a and 1b.
- If there is an incorrect wireless connection, use the ‘learn-in’ function as described below.
- Regularly clean and dust each alarm for optimal performance.
- Test your alarm twice to ensure proper functionality.
‘Learn-In’ Function
- Using a ballpoint pen, briefly push and release the ‘learn-in’ button on the back of the alarm.
- Push and hold the ‘learn-in’ button until the red LED goes out, then flashes to indicate successful unlearning from the network.
- If needed, ‘unlearn’ each alarm in the network before refitting.
- If the red LED is flashing rapidly, remove the alarm and seek replacement or contact support for further assistance.
Fixing Tool
An electrician is required to fit this product into your homes’ 230V mains
electrical circuit.
1st Fix
An electrician is required to fit the base plate for this product into your
homes’ 230V mains electrical circuit.
2nd Fix
Add the device head to the base plate once you have completed any renovations
or decorating.
Incorrect Installation
FAQ
Q: What should I do if my alarm is not interlinking with other alarms?
A: Ensure that all alarms are from the FireAngel Pro Connected range and follow the ‘Learn-In’ function steps to establish proper connections.
Q: How often should I clean and test my alarm?
A: It is recommended to clean and test your alarm at least twice a year to maintain its performance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>