Dongguan RC-02 LED Remote Control Instruction Manual
- June 9, 2024
- Dongguan
Table of Contents
Dongguan RC-02 LED Remote Control
Product Information and Usage Instructions
Product: LED Light Fixture with Remote Control (Model: RC-02)
Specifications
- Battery type: AAA x 2
- Wireless frequency: 2.4 GHz
- Max. remote distance: 50 M (16.4 FT)
- Channels: 99
- Battery life: >1 year
- Size: 44 mm x 138 mm x 23 mm
- Weight: 68g
- Working temperature: Not specified
Usage Instructions
- Insert two AAA batteries into the remote control.
- Turn on the LED light fixture.
- Press the “Pair” button on the remote control and select a channel on both the remote control and the LED light fixture. Ensure that the batteries are placed properly in the compartment before attempting to pair them up.
- Select the preferred mode on the remote control:
- CCT mode: Allows for control of color temperature and brightness.
- Select a channel on both the remote control and the LED light fixture.
- Select the preferred color temperature on the remote control by using the “< – >” buttons.
- Select the preferred brightness level by using the “< – >” buttons. Each step is 1%.
- RGB mode: Allows for control of RGB color, brightness, and saturation (not applicable on light models without RGB features).
- Select a channel on both the remote control and the LED light fixture.
- Select the preferred RGB color by using the “< – >” buttons.
- Select the preferred brightness level by using the “< – >” buttons. Each step is 1%.
- Select the preferred saturation level by using the “< – >” buttons. Each step is 1%.
- Effects mode: Allows for control of special effects, frequency of special effects, and dimmer.
- Select a channel on both the remote control and the LED light fixture.
- Select a special effect (e.g. Paparazzi) on the remote control.
- Select the preferred frequency of the special effect by using the “< – >” buttons.
- Adjust dimmer intensity by using the “< – >” buttons. Each step is 1%.
- Power on/off: Pressing ON/OFF button on the remote will not power on or off the light before they are paired.
- Ensure that the LED light fixture and remote control are paired before attempting to power on/off.
- To power on/off the LED light fixture, press the power button on the remote control.
- Deactivate/activate the LED light fixture from the remote control by pressing the appropriate button.
Important Notice
- Color temperature adjustment is not applicable on the light fixtures with daylight version only.
- The RGB mode is not applicable on the light models which have not RGB features.
Effects Mode
- Shortly press the ON/OFF button to activate the remote controller.
- Shortly press the START button to go to the mode of special effects.
- Press CH button and go to channel mode. Select the desired channel by pressing< – > < + >, confirm and return by shortly pressing CH button again.
- Press < > < > to move up and down from the menu. when the highlight stays on the effect mode, press < – > < + > to select the desired one from the special effects.
- Press < > < > to move the highlight to the dimmer, and press < – > < + > to change the brightness intensity from 10% to 100%. Each step up or down is 1%. The operation on the remote controller will be synchronized with the device since the first value setting after paring up.
- Press < > < > to move the highlight to the frequency of the special effects, and press < – > < + > to adjust the frequency from the numeric value 1 to 9. The higher value, the higher frequency of flashing. The operation on the remote controller will be synchronized with the device since the first value setting after paring up.
INTRODUCTION
Select the channel on the remote with the light fixture. ote & pair the
-
Beforeyouusetheremotecontroller,pleasemakesurethatthebatteriesAAA1.5vx2have been placed properly in the compartment.
-
Switch on the light fixture (option of batteriesor AC adapter) and make sure the light is on when you are ready to pair them up.
Note: Pressing ON/OFF buttonon the remotewillnot power on or off the light before they are paired. -
ShortlypressingtheON/OFFbuttontoactivatetheremoteiftheLCDscreenisinstandby mode.
-
Topair the light fixture and the remote, the channels on both devices must be same.
-
If the channel on the light fixture is different from that on the remote,the pairing will fail. Please re-select the channel on the remote by pressing
button. -
Go to the channel select screen by
button. -
Select the channel on the remote by pressing <+> < – > button
-
Press
button again to confirm the selected channel and go back to the menu. -
Check if the remote is synchronized with the light fixture.
-
Now you can use the remote to control the light fixture.
-
The LCD screen will automatically enter into standby mode if the remote is not used for some seconds. Press ON/OFF button to activate the LCD screen on the remote.
-
If the channel 00 is selected, all the light fixtures on the channel 01-99 will be controlled. You can controlthe dimmer, color temperature, RGBmode and poweron/offfrom the remote.
Deactivate/ activate the light fixture from the remote
-
Whenthelightfixtureisswitchon,youmay pressON/OFFbuttontoactivateordeactivate the light fixture. If you want to use the remote to control, please make sure the light is always switched on ( remember to choose the option of battery or AC power on the back of the lightfixture)
Note: if the lightfixtureis switchedoff,the remotewontworkwithit by pressingON/OFFbutton. -
Shortly pressing one time the ON/OFF button to activate the LCD screen on the remote.
-
Make sure the remote and the light fixture are paired up with the same channel selected.
-
LongpresstheON/OFFbuttonfor2-3secondstodeactivatethelightfixturetothesleepmode.
-
Double pressing the ON/OFF button to activate the light fixture from the sleep mode.
-
The LCD screen of the remote will go to standby mode, please press ON/OFF one time to activate the screen.
CCT mode
- Shortly press ON/OFF button once to activate the remote.
- Shortly press MODE button and go to CCT mode as the screen above.
- Press CH button to select the channel by < – > < + >, shortly press CH button again to confirm and go back to CCT mode as the screen above.
- Press <-> <+> to adjust the color temperature from 3200K to 5600K, each step is 100K.
- Press < > < > to move the highlight to the brightness, increase or decrease the light intensity by < – > < + > from 10% to 100%, each step is 1%.
Important Notice: Color temperature adjustment is not applicable on the
light fixtures with daylight version only.
RGB mode
- Shortly press ON/OFF button once to activate the remote.
- Shortly press MODE button and go to RGB mode as the screen above
- Press CH button to select the channel by < – > < + >, shortly press CH button again to confirm and go back to RGB mode as the screen above.
- Press <-> <+> to adjust the RGB color from the value 1 to 360, each step is 1.
- Press < > < > to move the highlight to the brightness, increase or decrease the light intensity by < – > < + > from 10% to 100%, each step is 1%
- Press < > < > to move the highlight to the SAT, increase or decrease the color saturation by < – > < + > from 10% to 100%, each step is 1%.
Important Notice: The RGB mode is not applicable on the light models which have not RGB features.
FCC
FCC Warning ：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.