Bestway S200206 SALUSPA Coleman Napa AirJet Inflatable Hot Tub Owner’s Manual

Bestway S200206 SALUSPA Coleman Napa AirJet Inflatable Hot Tub

Product Specifications

• Model: S200206
• Manufacturer: Bestway
• Website:www.bestwayusa.com/ourwarranties

Product Usage Instructions

Important Safety Instructions

When using this electrical equipment, basic safety precautions should always be followed.

• Read and follow all instructions provided in the manual.
• Replace damaged cords immediately; do not bury cords.
• Connect to a grounded, grounding-type receptacle only.
• Before entering the spa, measure the water temperature with an accurate thermometer.
• Consult a physician before spa use if you have certain health conditions or are taking medication.
• Never use the spa alone; always enter and exit slowly and cautiously.
• Avoid prolonged exposure to hot water and consult a doctor if pregnant or under medical care.

Pre-Setup Installation

• Follow the provided instructions in the manual for pre-setup installation, including proper placement of the spa and ensuring it is filled with water before operation.

Using the Spa

1. Ensure the spa is properly filled with water before use.
2. Enter and exit the spa slowly and cautiously to avoid slipping on wet surfaces.
3. Do not stay in the spa for longer than 10 minutes at a time.

Maintenance

• Regularly check and maintain the cleanliness of the spa water according to the manual’s instructions.

Disassembly and Storage

• When disassembling the spa for storage, follow the provided guidelines to ensure safe storage and preservation of the product.

Troubleshooting Error Codes

• If you encounter any error codes, refer to the troubleshooting section of the manual for guidance on resolving issues.

Frequently Asked Questions

Q: What should I do if I encounter an error code on the spa?

A: If you encounter an error code, refer to the troubleshooting section of the manual for steps to resolve the issue. If you need further assistance, contact customer support through the provided website.

Q: Can I use the spa if I am pregnant?

A: Consult your physician before using the spa if you are pregnant or have any health concerns. Prolonged exposure to hot water can be harmful during pregnancy.

Q: How often should I change the water in the spa?

A: Follow the maintenance guidelines in the manual for regular water testing and changing frequency based on usage and water quality.

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

• Carefully read, understand, and follow all information in this user manual before installing and using the spa.
• These warnings, instructions, and safety guidelines address some common risks of water recreation, but they cannot cover all risks and dangers in all cases.
• Always use caution, common sense, and good judgment when enjoying any water activity. Retain this information for future use.
• In addition, the following information can be supplied depending on the spa type. Keep these instructions in a safe place.
• If instructions are missing, please contact the manufacturer or search it on the website www.bestwayusa.com.
• WARNING IMPORTANT SAFETY INSTRUCTIONS When using this electrical equipment, basic safety precautions should always be followed, including the following.
• READ AND FOLLOW ALL INSTRUCTIONS
• WARNING – To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
• A wire connector is provided on this unit to connect a minimum 8 AWG (8.37 mm2) solid copper conductor between this unit and any metal equipment, metal enclosures of electrical equipment, metal water pipe, or conduit within 5 feet (1.5 m) of the unit.
• DANGER – Risk of injury.
• a) Replace the damaged cord immediately.
• b) Do not bury the cord.
• c) Connect to a grounded, grounding-type receptacle only.
• WARNING – This product is provided with a ground-fault circuit-interrupter integrated with the power plug at the end of the cord. The GFCI must be tested before each use. With the product operating, push the test button on the GFCI and the product should not operate. Push the reset button on the GFCI and the product should now operate normally. When the product fails to operate in this manner, there is a ground current flowing indicating the possibility of an electrical shock.
• Disconnect the power until the fault has been identified and corrected.
• DANGER – Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access by children. To avoid accidents, ensure that children cannot use this spa unless they are supervised at all times.
• DANGER – Risk of Injury. The suction fittings in this spa are sized to match the specific water flow created by the pump. Should the need arise to replace the suction fittings or the pump, be sure that the flow rates are compatible.
• Never operate the spa if the suction fittings are broken or missing. Never replace a suction fitting with one rated less than the flow rate marked on the original suction fitting.
• DANGER – Risk of Electric Shock. Install at least 5 feet (1.5 m) from all metal surfaces. As an alternative, a spa may be installed within 5 feet of metal surfaces if each metal surface is permanently connected by a minimum 8 AWG (8.37 mm2) solid copper conductor to the wire connector on the terminal box that is provided for this purpose.
• DANGER – Risk of Electric Shock. Do not permit any electric appliance, such as a light, telephone, radio, or television, within 5 feet (1.5 m) of a spa.

WARNING – To reduce the risk of injury:

• a) The water in a spa should never exceed 104°F (40°C). Water temperatures between 100°F (38°C) and 104°F (40°C) are considered safe for a healthy adult.
• Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes.
• b) Since excessive water temperatures have a high potential for causing fetal damage during the early months of pregnancy, pregnant or possibly pregnant women should limit spa water temperatures to 100°F (38°C).
• c) Before entering a spa, the user should measure the water temperature with an accurate thermometer since the tolerance of water temperature-regulating devices varies.
• d) The use of alcohol, drugs, or medication before or during spa use may lead to unconsciousness with the possibility of drowning.
• e) Obese persons and persons with a history of heart disease, low or high blood pressure, circulatory system problems, or diabetes should consult a physician before using a spa.
• f) Persons using medication should consult a physician before using a spa since some medications may induce drowsiness while other medications may affect heart rate, blood pressure, and circulation.
• WARNING: To avoid electric shock, do not use the spa during storms in case of thundering or lighting. In case of rain always keep the plug dry, plugging in with a wet plug is forbidden.
• Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 98.6°F (37°C). The symptoms of hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness, and fainting. The effects of hyperthermia include failure to perceive heat, failure to recognize the need to exit the spa or hot tub, unawareness of impending hazards, fetal damage in pregnant women, physical inability to exit the spa or hot tub, and unconsciousness resulting in the danger of drowning.
• WARNING: The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia.
• WARNING: Water attracts children; Always attach a spa cover after each use.
• WARNING: TO REDUCE THE RISK OF INJURY: Never add water that is higher than 104°F (40°C) into the spa.
• CONSULT YOUR PHYSICIAN FOR RECOMMENDATIONS.
• CAUTION: We strongly recommend not to unfold and inflate the spa if the ambient temperature is below 59°F(15°C). We suggest inflating the spa indoors and then continuing to set up outdoors.
• If the outdoor temperature is lower than 42.8°F(6°C), the spa heater must always be on. In this mode, the Freeze Shield™ system can keep the internal temperature between 42.8°F(6°C) and 50°F(10°C) to prevent damage, such as water freezing in the pipes or the circulation system.
• IMPORTANT: If the Freeze Shield™ system isn’t working, alarms will pop up in the spa. Be sure to check the status of your spa if the outdoor temperature is below 42.8°F(6°C).
• In case of a long-term absence from home when there is a risk of temperatures falling below 42.8°F(6°C), we strongly suggest disassembling the spa and storing it following the storage procedure.
• CAUTION: Do not use the spa alone.
• CAUTION: Always enter and exit the spa slowly and cautiously. Wet surfaces are slippery.
• CAUTION: To avoid damage to the pump, the spa must never be operated unless the spa is filled with water.
• CAUTION: Immediately leave the spa if the user feels uncomfortable or sleepy.
• NOTE: Please examine equipment before use. Notify Bestway® at the customer service address listed on this manual for any damaged or missing parts at the time of purchase.
• Verify that the equipment components represent the model that you had intended to purchase.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance are not recommended. Limited by local law regulations, the version for North America does not have a region selection option.

ASSEMBLY: THE PROVIDED WARNING LABEL

WARNING REDUCE THE RISK OF ELECTROCUTION

1. NEVER PLACE AN ELECTRIC APPLIANCE WITHIN 5 FEET OF THE SPA.

REDUCE THE RISK OF CHILD DROWNING

1. SUPERVISE CHILDREN AT ALL TIMES.
2. ATTACH SPA COVER AFTER EACH USE.

REDUCE THE RISK OF OVERHEATING

1. CHECK WITH A DOCTOR BEFORE USE IF PREGNANT, DIABETIC, IN POOR HEALTH, OR UNDER MEDICAL CARE.
2. EXIT IMMEDIATELY IF UNCOMFORTABLE, DIZZY, OR SLEEPY. SPA HEAT CAN CAUSE HYPERTHERMIA AND UNCONSCIOUSNESS.
3. SPA HEAT IN CONJUNCTION WITH ALCOHOL, DRUGS, OR MEDICATION CAN CAUSE UNCONSCIOUSNESS.
   • WHEN PREGNANT, SOAKING IN HOT WATER FOR LONG PERIODS CAN HARM YOUR FETUS. MEASURE WATER TEMPERATURE BEFORE ENTERING.
   • DO NOT ENTER SPA IF WATER IS HOTTER THAN 100°F(38°C)
   • DO NOT STAY IN SPA FOR LONGER THAN 10 MINUTES.

NOTE: The warning label must be posted near your spa in a readable position while using your spa.

1. Take out the warning label from the accessory kit.
2. Carefully peel the warning label.
3. Affix the warning label.

To order the warning label, please contact your local Bestway After Sales Service.

Supplier’s Declaration of Conformity

• Under FCC Part 15 SDoC Procedure
• Product Description: SPA
• Model Number: S200206
• Trade Name: Bestway
• Responsible Party in USA (USA) Inc. 3435 S. McQueen Road, Chandler, AZ 85286, United States of America
• Testing Laboratory: Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North),Caohejing Development Zone, Shanghai 200233, China
• Addendum to the Test Report: 220300151SHA-001

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

For and on behalf of Responsible Party

• Mi Huang
• info@bestwaycorp.us

SPA SUCTION FITTING INSTRUCTIONS

When installing and using this equipment, basic safety precautions shall always be followed, including the following.

IMPORT ANT SAFETY INSTRUCTIONS READ, FOLLOW, AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS

• Any modification that increases the flow rate of the circulation system shall require a re-evaluation of the cover/grate and sump to ensure that the flow rating of the Suction Outlet Fitting Assembly (SOFA) is not exceeded.
• Missing, broken, or cracked cover/grates, sumps, mud-frames, or any other SOFA component shall be replaced before bathers are allowed to use the pool.
• Loose cover/grates shall be reattached before bathers are allowed to use the pool.

1. Replace suction fittings every 3 years.
2. The use of adhesives or other attachment methods that prevent access to suction piping or SOFA components requiring periodic servicing is prohibited.
3. Refer to the following diagram for each SOFA part instructions:
4. Any field modification made to a SOFA not authorized by the manufacturer’s installation instructions shall void the SOFA certification.
   • No modification shall be made to a SOFA structure or flow path unless the new configuration has been certified as a new SOFA.
   • Cover/grates and all other SOFA components shall be replaced at or before the end of their service life and that service life begins the month and year in which a SOFA component is installed with or without water.
5. Winterizing instructions. Dry the suction fittings completely, and store the product in a dry room at a storage temperature of 59ºF~104°F(15°C~40°C).
   • Cover/grate, including fasteners, shall be observed for damage or tampering each operational day.
   • Missing, broken, or cracked covers/grates shall be replaced before bathers are allowed to use the pool.
   • Loose cover/grates and associated components shall be reattached before bathers are allowed to use the pool.
   • SOFA components and fastener receptacles shall be clean and free of debris or obstructions during the installation of the cover/grate and fasteners.
   • Remember to hand-check the cover/grate for snugness to the sump/ frame after installation.
6. Before using the product, please check the integrity of the head of the suction fitting. If the product is broken, or cracked, or the color has significantly faded, please do not use it.
7. All SOFAs shall be installed under the manufacturer’s installation instructions.
   • No modification shall be made to a SOFA structure or flow path unless the new configuration has been certified to the original SOFA.
   • These SOFA-configuration-specific flow ratings NOT be exceeded at any time the pool is open to bathers.
   • Cover/grates, when installed, shall not protrude more than 2 in. (51 mm) from the finished surface of the pool in which the SOFA is installed.
8. Installation Information label (Copy)
   • Manufacturer’s name : Bestway (Nantong) Recreation Corp.
   • Cover part number: S01/S03
   • Life expectancy: 3 Years
   • Cover flow rating: 20 GPM/90 GPM
   • Configuration and installed orientation: Wall
   • Location: Spa Pool liner
   • Date of installation: ___
   • The installer needs to fill in the balance of information and permanently post it as near as feasible to the pump control. Keep a copy of this information with the other important pool-related documents.
   • Please research and download the General Certificate of Conformity through www.bestwayusa.com

GFCI WARNING

• IMPORTANT: RISK OF ELECTRIC SHOCK. THE GFCI MUST BE TESTED BEFORE TURNING ON THE PUMP EACH TIME.
• WARNING: The GFCI plug must be tested before each use to avoid the risk of electric shock.
• Before inserting a plug into a power outlet, make sure the current rate of the power outlet is suitable for the pump
• Do not use the pump if this test fails. For assistance, please visit the support section on our website, www.bestwayusa.com.
• The spa is a class I electrical appliance and must be connected directly to a grounded socket. It is recommended to only use a socket that is resistant to humidity and capable of high power loading.
• Regularly check the plug and socket for signs of damage before using the spa – do not use the spa if the plug or socket is damaged. If you are unsure about the quality of the electrical supply, please consult a qualified electrician before use.

PRE-SETUP

CHECKLIST

• To check the parts printed on the package, verify that the equipment components represent the model that you had intended to purchase.
• In case of any damaged or missing parts at the time of purchase, visit our website bestwayusa.com/ourwarranties.

CHOOSE THE CORRECT LOCATION

• Indoor and outdoor & above ground & portable wiring & portable spa.
• Only For Spas Equipped With Wi-Fi: To choose the correct location for the spa equipped with Wi-Fi, read the Spa Wi-Fi instruction leaflet included in the package and the following instructions.
• For All Spas: The surface chosen to install the pool must respect the following technical characteristics.
• Because of the combined weight of the water inside the spa and the users, the surface chosen to install the spa must be capable of uniformly supporting the total weight for the entire time the spa is installed.
• An adequate drainage system has to be provided to deal with overflow water for both indoor and outdoor installations. During filling, draining, or when in use, water may flow out of the spa.
• The surface must be flat and smooth. If the surface is inclined or uneven, it can create an unbalanced loading on the structure of the spa. This situation can damage the welding point.
• The selected surface must be clear of any type of object. Due to the weight of the water, any object under the spa could damage or perforate the bottom of the spa.
• The selected location must not have overhead power lines or trees. Be sure the location does not contain underground utility pipes, lines, or cables of any kind.
• The selected position must be far from the house entrance. Do not position any equipment or other furniture around the spa.
• The water that comes out of the spa during use or due to a faulty product can damage the furniture inside the house or surrounding the pool.
• Do not install the spa on carpet or other floor materials (e.g. untreated cork, timber, or other porous materials) that promote or harbor moisture and bacteria, or that could be affected by water treatment chemicals used in the spa.
• Consult your local government authority for installation regulations.
• Suggested set-up surfaces: grass, ground, concrete, and all other surfaces that respect the above set-up conditions.
• Not suggested surfaces: mud, sand, gravel, deck, balcony, driveway, platform, soft/loose soil, or other surface that does not meet the above set-up conditions.

Indoor Installation:

• Be aware of special requirements if you install the spa indoors.
• Humidity is a natural side effect of SaluSpa installation. Determine the effects of airborne moisture on exposed wood, paper, etc. in the proposed location.
• To minimize these effects, it is strongly recommended to provide plenty of ventilation in the selected area. Consult an expert to determine if more ventilation is needed.
• Keep suitable air treatment in the indoor location (ventilation and dehumidification) regularly to preserve the bathers’ safety and comfort.
• Empty the spa before removing it from the indoor location or building.

Outdoor Installation:

• The selected surface must be clear of aggressive plants and weed species. Those types of strong vegetation could grow through the liner and create water or air leakage.
• The grass or other vegetation that may cause odor or slime to develop has to be eliminated from the set-up location.
• Do not leave the spa’s surface exposed to direct sunlight for long periods. We recommend protecting the spa from direct sunlight exposure with a cover when not in use.
• Follow the important instructions above to choose the correct surface and location to set up your spa. Damaged parts of the spa, since the set-up surface and location do not match the instructions, will not be considered as manufacture defects and will avoid the warranty and any service claims. It is the responsibility of the owner to ensure the site meets the requirements at all times.
• Consult your local professional installers for environmental conditions, such as groundwater and the risk of frost.

INSTALLATION

For the installation instructions, follow the drawings printed on the package. Drawings are for illustration purposes only. May not reflect the actual product. Not to scale.

RECOMMENDATIONS DURING THE INSTALLATION

• The use of an extension cord or multi-plug adaptor with the spa heater is dangerous and can cause the plug to overheat, causing damage to the equipment and surrounding items.
• Keep the spa away from the rest area to minimize noise disturbance.
• Keep at least 1m clearance around the spa.
• We don’t recommend using seawater to fill the pool. Sea water can corrode the internal metal components due to the high concentration of salt.
• The filtration system of the spa is designed to be used only with the filter cartridge. Any other component added inside the filter set can cause damage to the filtration system of the spa. This will not be covered by customer service.

INFLATION INFORMATION

• When inflating, you will notice that air will be expelled from the area where the air hose connects to the pump, this is normal for technique requirements.
• Don’t cover the holes on the base of the inflation hose, the inflation hose is designed to inflate the spa to the correct pressure.
• This operation will over-inflate the liner and damage the structure.
• Do not use an air compressor to inflate the spa.
• Do not drag the spa on rough ground as this may cause damage to the spa liner. Inflation time for reference only.

USING THE SPA

CONTROL PANEL

The WATER HEATER rate may change in the conditions below:

• It is important to follow these suggestions if you are setting up the spa during the winter period.
• This will prevent any damage to the spa heater and material of the liner, extending the life of your product drastically.
• If the outdoor temperature is below 10°C (50°F), to avoid any damage to the spa liner, keep the package indoors where the temperature is above 15°C (59°F). This will make the spa liner more flexible and easier to set up.
• Open the package and inflate the spa liner using the spa heater in a room where the temperature is above 15°C (59°F).
• Position the spa liner outdoors in the desired position, then connect the spa heater and fill it with water. The water temperature used to fill the spa must be above 6°C (42.8°F), otherwise, when you begin to operate the spa heater, the E03 alarm will appear.
• You can keep the spa on during winter when the temperature is lower than 6°C (42.8°F). The Freeze Shield™ system automatically keeps the water temperature between 6°C (42.8°F) and 10°C (50°F), and it will prevent the water from freezing.
• If the water temperature is below 6°C (42.8°F), the spa heater must always be on.
• In this mode, the Freeze Shield™ system can keep the internal temperature between 6°C (42.8°F) and 10°C (50°F) to prevent damage, such as water freezing in the pipes or the circulation system.
• If any alarms appear on the display, the Freeze Shield™ system isn’t working. Be sure to check the status of your spa if the outdoor temperature is below 6°C (42.8°F).
• In case of a long-term absence from home when there is a risk of temperatures falling below 6°C (42.8°F), we strongly suggest disassembling the spa and storing it following the storage procedure.
• Any damage as a result of using the spa in these conditions is the responsibility of the customer. Do not use the spa when the ambient temperature reaches -10°C (14°F).

HEATING TIME

• To reach 40°C (104°F), the heating duration required is based on the starting water temperature and ambient temperature, the data below is purely for reference.
• To display the current water temperature, run the filter system for at least a minute.

Ambient Temperature| Water Temperature| Set Temperature| Heating Duration
---|---|---|---
10ºC (50ºF)| 10ºC (50ºF)| 40ºC (104ºF)| 23-40h
15ºC (59ºF)| 15ºC (59ºF)| 40ºC (104ºF)| 18-36h
20ºC (68ºF)| 20ºC (68ºF)| 40ºC (104ºF)| 13-29h
25ºC (77ºF)| 25ºC (77ºF)| 40ºC (104ºF)| 9-20h
30ºC (86ºF)| 30ºC (86ºF)| 40ºC (104ºF)| 7-15h

• We do not recommend setting up the spa, filling it, and heating it for the first time when the outdoor ambient temperature is below 10ºC (50ºF) as it will take a very long time to heat.
• To reach and maintain the maximum water temperature of 40ºC (104ºF), the outdoor temperature must not be lower than -5ºC (23ºF).
• Do not operate the spa below -10ºC (14ºF).
• Be sure to cover the spa with the spa cover whenever the heating function is activated. Leaving the spa uncovered will increase the heating duration required.
• When the spa is assembled with water, do not switch off the spa heater if the temperature is lower than 6ºC (42.8°F).

SPA HEATER SPECIFICATION

Power Rate| Heat Element Power| Filter Pump Power| Massage Tube Power| Jet Pump Power
---|---|---|---|---
110-120V AC, 60Hz, Single Phase12A at 20ºC| **11.3A at 20ºC| ****0.7A| 6.5A| 12A**

MAINTENANCE

CAUTION: You must ensure the pump is unplugged before beginning spa maintenance to avoid the risk of injury or death.

LINER

• It is normal that your spa liner may appear as if it is losing air. Changes in ambient temperature may change the internal air pressure in the liner.
• When detaching the pump from the liner, to avoid water coming out from the pipes, block the air pipe by screwing on the cap and installing the stoppers on the debris screens.

COVER

• The cover shall be cleaned inside and outside periodically, using a gentle detergent for the PVC material.

FILTER CARTRIDGE

• To optimize the performance of the filtration system, check and clean your filter cartridge every day.
• We recommend changing your filter cartridge every week or replacing it if after washing, the filter cartridge remains soiled and discolored.

WATER

• Many pollutants in the water settle on surfaces below the water line. These pollutants can cause bacterial, algal, or fungal growth. It is recommended that spas be cleaned as regularly as necessary.
• After a time, tenacious stains or biofilms may develop on the accessible surfaces below the water line, or high concentrations of salts or unwanted reaction by-products may also occur.
• Depending on the hygienic condition, cleanliness, visibility, odor, debris, and stains, it is recommended to change the water completely and clean/disinfect the spa.
• When emptying the spa, the regulations and the instructions for draining the water shall be observed.
• Keeping your spa water clean and chemically balanced is necessary. Simply cleaning the filter cartridge is not enough for proper maintenance, we recommend using pool chemicals to maintain water chemistry and chlorine or bromine tablets (do not use granules) with the chemical dispenser.
• Water quality will be directly related to frequency of use, number of users, and overall maintenance of the spa.
• The water should be changed every 3 days if there is no chemical treatment being performed with the water. It is highly recommended to use tap water for spa filling to minimize the influence of unwanted contents, such as minerals.
• We recommend you take a shower before using your SaluSpa, as cosmetic products, lotions, and other residues on the skin can quickly degrade water quality.
• Don’t throw chemical products directly in the water; the chemicals will deposit on the bottom of the spa damage the material and discolor the PVC.

Chemical Tablets (Not Included):

• Remove the chemical dispenser from the spa when the spa is in use.
• After performing chemical maintenance and before using the spa, use a test kit (not included) to test the water chemistry. We recommend maintaining your water chemical balance as the following:
• Spa damage resulting from misuse of chemicals and mismanagement of spa water is not covered by the warranty.
• Pool chemicals are potentially toxic and should be handled with care. There are serious health risks from chemical vapors and the incorrect labeling and storage of chemical containers.
• Please consult your local pool or chemical supply retailer for more information about chemical maintenance. Pay close attention to the chemical manufacturer’s instructions.
• Over usage of chemicals will discolor the printing and all points of the spa material; in the worst case, it will damage the structure of the spa liner.

DISASSEMBLY AND STORAGE

DRAINING

• To drain the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect the actual product. Not to scale.

DRYING

• After draining the spa, some water remains inside the spa pump, liner chamber, massage chain, and inflatable cover.
• Make sure that all the above parts of the spa are completely dry.
• This is essential to extend the life of the spa and to avoid the creation of mildew.
• The water inside the liner chamber and the inflatable cover come from the humidity in the air used to inflate them. The quantity of water may vary depending on the percentage of humidity in your area.
• To dry the different parts of the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect the actual product. Not to scale.

CLEANING

• Detergent residues and dissolved solids from bathing suits and chemicals may build up on the spa walls. Use soap and water to clean the walls and rinse thoroughly. Do not use hard brushes or abrasive cleaners.

DEFLATING Only For Inflatable Spas:

• Your spa is equipped with a deflation function to remove all the air from inside the chamber to make it easier to pack and store.
• To deflate the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect the actual product. Not to scale.

REPAIRING For PVC Material：

• If the spa is torn or punctured, use the provided PVC repair patch and follow the below steps.
• Clean the area to be repaired. Carefully peel the patch.
• Press the patch over the area to be repaired.
• Wait 30 seconds before inflation.

For DuraplusTM PVC Material:

• If the spa is torn or punctured, use the provided PVC patch and glue (not included) and follow the below steps.
• Clean and dry the area to be repaired.
• Cut the provided PVC patch to the appropriate size.
• Use glue (not included) to coat one side of the newly cut patch. Make sure the glue is evenly distributed. Wait for 30 seconds and then place the cut patch with glue over the damaged area.
• Smooth out any bubbles of air that may be trapped underneath, and press firmly for two minutes.
• Wait 30 minutes before inflation.

STORAGE

• Remove all accessories and make sure that the spa liner, inflatable cover, pump, and accessories are completely clean and dry before storing. If a spa is not completely dry, mold may result and will damage the spa liner during the storage period.
• Fold the spa liner only if the environment temperature is above 10ºC (50ºF). If a spa is not completely dry, mold may result and will damage the pool liner.
• Store the spa in a dry place with a moderate temperature between 10ºC (50ºF) and 38ºC (100ºF).
• We strongly recommend positioning the spa liner and inflatable cover inside a carton box, to better protect the PVC material during winter months.

TROUBLESHOOTING

– GFCI broken

| – Check power source

– For assistance, please visit the support section on our website, www.bestwayusa.com

The pump does not heat properly with the lid| – Temperature set too low

– Dirty filter cartridge

– Spa is not covered with a lid

– The heating element failed

| – Set spa to a higher temperature; refer to pump operation section

– Clean/replace the filter cartridge; refer to section filter cartridge cleaning and replacement section

– Attach the cover

– For assistance, please visit the support section on our website, www.bestwayusa.com

Massage System does not work| – The air pump is overheating

– The message stops automatically after 30 minutes

– The air pump is broken

| – Unplug the pump and wait two hours until the pump has cooled. Insert the plug and press the Massage System Button

– Press the Massage System Button to reactivate

– For assistance, please visit the support section on our website, www.bestwayusa.com

Pump adapters are not level with the spa adapters| – One characteristic of the material is that it changes shape, which is normal| – Elevate the pump with wood or another type of insulated material to bring the pump’s adapters level with the spa’s adapters
Spa pool air leakage| – Spa is torn or punctured

– The air valve is loose

| – Use the provided repair patch

– Using soapy water, cover the air valve to check if the air is leaking, if so, fasten the air valve by turning the valve clockwise.

Water is not clean| – Insufficient filtering time

– Dirty filter cartridge

– Improper water maintenance

| – Increase filtration time

– Clean/replace the filter cartridge (refer to Filter Cartridge Cleaning and Replacement section)

– Refer to the chemical manufacturer’s instructions

The HydroJet™ system is not working| – The button light is on, but the water doesn’t flow out from the jets

– The HydroJet system shuts off automatically after 1 hour

|  The Thermo fuse cut off the power due to a high temperature being reached by the motor. Power off the spa heater for about 3 hours, wait for the temperature to drop, and restart the HydroJet function. If the problem remains, please visit the support section on our website, www.bestwayusa.com.
– Restart the HydroJet function again to enjoy your spa

ONLY FOR SPA EQUIPPED WITH Wi-Fi

connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair the pump heater again. 5GHz networks are not supported.
The spa pump location is too far from the router.| Check with your cell phone to see if there is a full Wi-Fi signal. In case the strength of the signal on your phone is too low, check where the strength of the Wi-Fi signal is full and place the spa in that position.
Set up with the wrong network name| Start the connection procedures again and be sure that the network name is typed correctly.
The Wi-Fi password used during the connection is wrong| **** Start the connection procedures again and be sure that the password is correct.
The strength of the Wi-Fi signal is not stable| 1. Check that the router works correctly.

2. Go near the spa and check the signal on your phone. If the signal strength is not stable, check the condition of your router. If the signal strength is full, repeat the operation to connect the spa to the network.

There is an appliance near the spa pump or the router that creates signal interference| The Wi-Fi connectivity can be interrupted by electromagnetic or other interferences. Keep the appliance away from other electronic devices that may cause interferences.
Your phone will not connect to the Wi-Fi network during the registration| Check if the mobile device is in airplane mode.

Make sure to have the airplane mode deactivated when connecting to the Wi-Fi network.

APP Feedback| Consult the help section in the APP for extensive and up-to-date troubleshooting tips.

Wi-Fi LED Status

The indicator light flashes slowly| Waiting to connect to the router| The pump is ready to connect to your phone
---|---|---
An indicator light is on| Connected to the router| The pump is already connected to your phone
The indicator light flashes quickly| Lost Wi-Fi signal| Check the status of your router. The spa lost the Wi-Fi signal.
The indicator light is off| Light damaged / Wi-Fi module has a problem| For more information, please visit the support section on our website, www.bestwayusa.com.

ERROR CODES

• For support please visit us at: bestwayusa.com/ourwarranties
• ©2023 Bestway Inflatables & Material Corp.
• All rights reserved
• Trademarks used in some countries under license from Bestway Inflatables & Material Corp., Shanghai, China
• Exported by Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited
• Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong
• Distributed in North America by Bestway (USA) Inc., 3435 S. McQueen Road, Chandler, AZ 85286, United States of America
• Tel: +86 21 69135588
• www.bestwayusa.com .

Documents / Resources

| Bestway S200206 SALUSPA Coleman Napa AirJet Inflatable Hot Tub [pdf] Owner's Manual
S200206, S200206 SALUSPA Coleman Napa AirJet Inflatable Hot Tub, SALUSPA Coleman Napa AirJet Inflatable Hot Tub, Coleman Napa AirJet Inflatable Hot Tub, AirJet Inflatable Hot Tub, Inflatable Hot Tub, Hot Tub, Tub
---|---

References

• Our Warranties
• Home Page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>