MINSUO SP-005 Wireless Wall Mount Speaker User Manual

July 16, 2024
MINSUO

MINSUO SP-005 Wireless Wall Mount Speaker

User Manual

Thank you for purchasing Our company’s wireless speakers, please read this guide to ensure safe and satisfactory operation, please Keep this guide in a Safe Place for future reference.

Instruction

Technical Specification

Pairing Instructions

  1. Long press seconds to enter the pairing state
  2. Turn on the Bluetooth search function of the phone or any other device that you want to connect to, and the phone will show that Wall Mountes Sceaker” has been found.
  3.  Select “Wall Msunted Speaker’ (enter 0000 as pairing password for some phones) it will automatically connect to your phone, There will be “dudu’ voice means connect successfully.

Please note

  1. Make sure the two devices via Bluetooth® are within 30 feet in order for them to be paired. Once the devices are paired successfully, they will reconnect to the device automatically when turned back on as long as your Elluetooth@connection is enabled.
  2. If the pairing is failed, try steps 2 to 3 step again.
  3. TWS (1+1) painng will only works if you have same 2 pieces of speaker.

To start the TWS pairing, please follow:

  1. Turn on the 2 pieces T speaker;
  2. Press and hold ‘M’ (one of the speaker) for around 2 seconds: (A sound will make after successful pairing.)
  3. Vatch Bluetcoth name Wall Mounted Speaker’ then you can enjoy TS mode.
  4.  you wan: to cansel TWS made pls press and hok! ‘M (ore of the speaker) or around
  5. seconds:(A sound will advise it’s cancel TWS mode.)

Accessories list

Included

  • Speaker x1
  • USB-C charging cable x1
  • Audio cable x1 -Screw × 2
  • 3М adhesive tapex1 -User manualx1

Installation Method

  1. Step: Peel off one side of the film on
  2. Step 2: Put and stick at the back of 3.
  3. Step3: Peel off the other side of the film on
  4. Step4: Put and stick ® onto the wall or any clean & flat surface.
  5. Step5: Install 1 into 2  then done .

Installation Method 2:
Before installation,please first drill 2 holes in a wall for further steps.

Warnings and Tips

  1. To reduce the risk of fire or electric shock, do not expose the device in moist or watery areas.
  2. Do not place this product under open fire 3. Use a safety charger for charging.
  3. Do not charge for a long time.
  4. Keep away from heating devices.
  5. Do not disassemble, repair or modify by yourself
  6. Dispose of waste packaging batteries, and old electronic parts property 8. Please charge once a month to extend the battery life for long time storage.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class E digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicity approved by manufacturer could void your authorty to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals