commBOX Universal VC Bracket Instruction Manual
- June 12, 2024
- Commbox
Table of Contents
commBOX Universal VC Bracket
Product Information
- Product Name: BSEXBSF DDFTTPSJFT
- Model Number: #4NBMMTUSJQ QD
- Color: BTTFNCMZ
- Power Source: 4USJQ QDT
- Voltage: $#JHTUSJQ QD
- Weight: %’JYFEQMBUF TFU
- Dimensions: &’JYFEQMBUF TFU
- Maximum Speed: $PNQFOTBUJOH$MFBSBODF 8BTIFS 5PPM
- Minimum Speed: ”JYFEQMBUF TFU
- Material: (.GMBUIFBE TPDLFUDBQTDSFX
- Warranty: QDT
Product Usage Instructions
- Before using the product, make sure to read the user manual / instructions.
- Connect the power source (#4NBMMTUSJQ QD) to the product.
- Adjust the voltage ($#JHTUSJQ QD) according to your requirements.
- Ensure the weight (%’JYFEQMBUF TFU) of the product is suitable for your needs.
- Place the product on a stable surface.
- Set the desired speed using the speed control buttons ($PNQFOTBUJOH$MFBSBODF 8BTIFS 5PPM for maximum speed and ”JYFEQMBUF TFU for minimum speed).
- Use the product with caution, following the safety guidelines provided in the user manual / instructions.
- For maintenance and cleaning instructions, refer to the user manual / instructions.
- If you encounter any issues or have questions, refer to the warranty information (QDT) or contact customer support for assistance.
Caution: To ensure the safe use of CBVCBKT-U, and prevent yourself and
other people from being exposed to danger and property damage， please read
this manual carefully before use. Please check carefully before assembling to
make sure there are no missing or defective parts. Our customer success
representatives will assist you quickly with installation problems and resolve
missing or defective parts. Do not use defective parts as improper
installation may result in damage or serious injury. The company shall not be
liable for the damage or injury caused by improper installation, assembly or
use.
For additional mounting options refer to:
support.commbox.com.au/support/solutions.
Tools Required
Compensating Clearance Washer/ Tool.
Hardware for mounting to panel:
Hardware for device mounting(VC camera):
Assembly Procedure
Step 1. Fix D/E/F on C with striped nut (H), as Figure 1.
Step 2. Fix the device to the bracket, as Figure 2.
Step 3. Fix strip A and small strip with screws, as Figure 3.
Step 4. Secure the strip to the panel ,use VESA screws sup- plied with your panel and lock the bracket on the panel, as Figure 4.
Step 5. Hang the installed bracket on the wall panel, as Figure 5.Note the bracket needs to be mounted between the panel and the VESA arm bracket.
