OSRAM AC025 Series Smart plus Mini Switch Owner’s Manual
- July 15, 2024
- OSRAM
Table of Contents
OSRAM AC025 Series Smart plus Mini Switch
Product Specifications
- Model: OSRAM AC0251100NJ/AC0251600NJ/AC0251700NJ
- Vendor: OSRAM
- Description: Smart+ switch mini battery, action, link quality
OSRAM AC0251100NJ/AC0251600NJ/ AC0251700NJ
Pairing
- For the OSRAM Smart+ Switch Mini (AC0251100NJ/AC0251600NJ/AC0251700NJ) hold the
- Middle and Arrow Down Buttons for 10 Seconds to Reset the Device. Hold the Middle and
- Arrow Up Buttons for 3 Seconds to connect. If the Switch is connected hold the Middle and Arrow
- Up Buttons for 3 Seconds to disconnect.
Actions
Arrow up
causes ‘on’ at short pressure; ‘brightness_move_up’ at long pressure (>1 sec);
‘brightness_stop’ at long pressure release
Circle
causes ‘brightness_move_to_level’ at short pressure; ‘move_to_saturation’ at
long pressure (>1 sec); ‘hue_stop’ at long pressure release
Arrow down
causes ‘off’ at short pressure; ‘brightness_move_down’ at long pressure (>1
sec); ‘brightness_stop’ at long pressure release
OTA updates
This device supports OTA updates, for more information see OTA updates
Options
How to use device type-specific configuration
legacy: Set to false to disable the legacy integration (highly recommended), which will change the structure of the published payload (default true). The value must be true or false
Exposes
Battery (numeric)
The remaining battery in %, can take up to 24 hours before reported. Value can
be found in the published state on the battery property. It’s not possible to
read ( /get ) or write ( /set ) this value. The minimal value is 0 and the
maximum value is 100. The unit of this value is % .
Action (enum)
Triggered action (e.g. a button click). Value can be found in the published
state on the action property. It’s not possible to read ( /get ) or write (
/set ) this value. The possible values are:brightness_move_to_level . .
Link quality (numeric)
Link quality (signal strength). Value can be found in the published state on
the link quality property. It’s not possible to read ( /get ) or write ( /set
) this value. The minimal value is 0 and the maximum value is 255 . The unit
of this value is lqi.
- Help to make the docu better and edit this page on Github ✌
Last Updated: 17.3.2024, 21:09:29
Frequently Asked Questions
- Q: How do I know when the battery is low?
- A: The remaining battery percentage can be found in the published state on the battery property. It’s updated every 24 hours.
- Q: Can I customize the actions of the buttons?
- A: The actions are predefined and cannot be customized. Refer to the manual for details on each action.
- Q: Does this device support firmware updates?
- A: Yes, this device supports Over-The-Air (OTA) updates. Check the OTA updates documentation for more information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>