Best Quality Furniture VEN-CK4NC Venetian 6 Piece Champagne California King Bedroom Set Instruction Manual
- June 3, 2024
- Best Quality Furniture
Table of Contents
Best Quality Furniture VEN-CK4NC Venetian 6 Piece Champagne California
King Bedroom Set
PART LIST
HARDWARE LIST
ASSEMBLY INSTRUCTION
- Step 1: Secure the ( B) Bun Foot to the bottom of (A) Dresser as a diagram showing
- Step 2: Secure the ( C) Metal Leg to the bottom of ( A) Dresser as a diagram shown.
- Step 3: Secure the ( D) Center Leg to the bottom of (A) Dresser as a diagram shown.
HARDWARE LIST (ANTI-TIPPING)
PART LIST
HARDWARE LIST
- Step 1: Attach the ( B) extension post as shown in the drawing and tighten with ( 2) JCBC 40mm, ( 3) M6 spring washer & ( 4) M6 flat washer.
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have loose inside the carton during shipment. Identify and count all parts and compare them with the parts list below.
PART LIST
HARDWARE LIST
- Step 1: Secure the ( L) Bun Foot to the bottom of ( B) Footboard as a diagram shown.
- Step 2: Attach the ( C) Side Rail to the (A) Headboard & ( B) Footboard.
- Step 3: Attach the ( K) Drawer Support Rail to the ( C) Side Rail as the diagram shown tighten with (2) JCBC 16mm, (5) M6 Spring Washer & ( 6) M6 Flat Washer.
- Pull the drawer
- Using both hands, – Left hands side – pull up switch – Right hands side – pull down switch
- Then remove the drawer from the drawer base panel
Remove the ( D ) Drawer from the ( E ) Drawer Base Panel for the assembly panel to the footboard.
- Step 4: Attach ( E ) Drawer Base Panel to the ( B) Footboard as the diagram shown and tighten using ( 3) JCBC 35mm, ( 5) M6 Spring Washer & ( 10) 1 /4″ Flat Washer.
- Step 5: Tighten the ( E) Drawer Base Panel to the ( K) Drawer Support Rail Panel as the diagram is shown using the ( 3) JCBC 35mm, ( 5) M6 Spring Washer &
- Step 6: Attach ( H ) Drawer Support Leg to the ( K) Drawer Support Rail using ( 3) JCBC 35mm,( 5) M6 Spring Washer & ( 6) M6 Flat Washer. Attach the ( 9) Adjustable Leveller and adjust it to level the bed with the floor.
Step to install the drawer on the drawer base panel Prefer 2 people to install the drawer
- Adjust the ball bearing plate to the front as a diagram shows.
- Then attach the drawer to the drawer base panel and install with carefully.
- Step 7: Insert the ( D) Drawer into the ( B) Footboard.
- Step 8: Secure the ( F) Roll Slat using the ( 7) Screw 32mm provided.
- Step 9: Attach ( G) Slat Support Leg & ( J) Center Vertical Slat to the bottom of ( F) Roll Slat using ( 4) JCBC 60mm & ( 5) M6 Spring Washer. Attach the ( 9) Adjustable leveler and adjust it to level the bed with the floor.
- STEP 10: Attach the ( I ) Slat Cover Panel to the top of the slat close to the footboard and screw using the ( 8) Screw 16mm provided.
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have loose inside the carton during shipment. Identify and count all parts and compare them with the parts list below.
PART LIST
HARDWARE LIST
- Step 1: Secure the ( B) Bun Foot to the bottom of (A) Nightstand as a diagram shown.
- Step 2: Secure the ( C) Metal Leg to the bottom of (A) Nightstand as a diagram shown.
HARDWARE LIST (ANTI TIPPING)
Documents / Resources
| Best
Quality Furniture VEN-CK4NC Venetian 6 Piece Champagne California King Bedroom
Set
[pdf] Instruction Manual
9749 Venetian, Chest Side Table, 9749 Venetian Chest Side Table, VEN-CK4NC
Venetian 6 Piece Champagne California King Bedroom Set, VEN-CK4NC, Venetian 6
Piece Champagne California King Bedroom Set
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>