Best Quality Furniture 0245A Madelyn 4 Piece Grey Walnut Color Full Bedroom Set Instruction Manual
- June 5, 2024
- Best Quality Furniture
Table of Contents
Best Quality Furniture 0245A Madelyn 4 Piece Grey Walnut Color Full Bedroom Set
ASSEMBLY INSTRUCTIONS
**MODEL : 0245A
MADELYN DRESSER**
(BOX 1)
BOX OF DRESSER
(BOX 1)
HARDWARE LIST
STEP 1: Pull the bottom drawer and take out the Bunfoot carton ( B ). Assemble the Bun Foot (B) with JCBC Bolt (1),Spring washer (2),Flatwasher (3) and securing with Allen Key (4) as shown.
**COMPLETED ASSEMBLY**
NOTE : MUST TIGHTEN SCREWS PERIODICALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
MODEL:0245A
MADELYN DRESSER & MIRROR
(Box 1)
BOX OF MIRROR
(Box 1)
BOX OF MIRROR
(Box. 1)
HARDWARE LIST
STEP 1: Cut of the Raffia String from the back of DRESSER ( B ).
STEP 2: Place the MIRROR FRAME (A) on the top of DRESSER (B), turn the MIRROR SUPPORT RAIL (C) upward at the back of DRESSER (B), then Tighten with CSK SCREW (1).
STEP 3: Tighten the CSK Screw (1) as shown.
**COMPLETED ASSEMBLY**
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS. STEP 2 : STEP 3 : NO ITEM Qty.
MODEL : 0245A
MADELYN NIGHT STAND
(BOX 1)
BOX OF NIGHT STAND
(BOX 1)
HARDWARE LIST
STEP 1: Pull the bottom drawer and take out the Bunfoot carton ( B ). Assemble the Bun Foot (B) with JCBC Bolt (1),Spring washer (2),Flatwasher (3) and securing with Allen Key (4) as shown.
COMPLETED ASSEMBLY
NOTE : MUST TIGHTEN SCREWS PERIODICALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
MODEL : 0245A
MADELYN FULL BED (4+4
(BOX 1)
BOX OF HEADBOARD & FOOTBOARD
(BOX 1)
HARDWARE LIST
STEP 1.1: Attach Head Board Leg ( C ) to Head Board ( A ) as shown using
JCBC BOLT( 1 )with Spring Washer (2), Flat washer (3)and securing with ALLEN
KEY ( 4 ) .
STEP 1.2: Fix the other holes with Csk Screw (6) as shown.
STEP 2.1 : Attach Side Rail ( F ) & ( G ) to the Bed Side Rail Leg ( H )
as shown using
JCBC BOLT( 1 )with Spring Washer (2),Flat washer (3)and securing with ALLEN
KEY ( 4 ) by outside side rail (F) & (G) .
STEP 2.2 : Hook SET-UP SIDE RAIL TO HEAD BOARD (A) closely and push down
to fit. repeat step 2 with other end of rail to hook onto FOOTBOARD (B).
STEP 3 : Tighten the 4 Corner with Allen Key (5).Fix the Bed Slat Support Leg (E ), to Bed Slat (D) as shown . Install the bed slat ( D ) to side rail ( F ) & ( G ) and tighten with Csk Screw ( 6 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY)
**COMPLETE ASSEMBLY**
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.