WRS IFA03 Hypermotard 698 Mono Mounting Kit Installation Guide
- July 14, 2024
- WRS
Table of Contents
WRS IFA03 Hypermotard 698 Mono Mounting Kit
Product Specifications
- Product Name: CNC Racing Handguard Arm LH
- Model Number: YP002231340
- Material: Anodized Aluminum, Lexan
- Compatibility: Replaces OEM pump screw
- Includes: Handguard Arm LH, Special Screw, O-Ring, Pin, Spring Washer, Screw
Product Usage Instructions
Assembly by Skilled Personnel
The assembly of the product must be carried out by skilled personnel to ensure
proper installation.
Handling Anodized and Lexan Parts
Do not use acid or alkaline-based degreasers on anodized and/or Lexan parts.
Use neutral soaps for cleaning. Wash the parts on a cold bike, avoiding hot
water. Do not use a pressure washer.
Installation Steps
- Identify the components: Handguard Arm LH, Special Screw, O-Ring, Pin, Spring Washer, Screw
- Replace the OEM pump screw with the Special Screw provided.
- Assemble the Handguard Arm LH using the Pin and Spring Washer.
- Secure the assembly with the Screw (M6x16).
Frequently Asked Questions (FAQ)
Q: Can I install the Handguard Arm LH without professional help?
A: It is recommended to have the product installed by skilled personnel to
ensure proper installation and functionality.
Installation
The mounting of the product it must be realized from skilled personnel.
CNC RACING reserves the right, in its sole discretion, to modify the product and this information at any time without prior notice.
Use of the Products, usage precautions and disclaimer.
The Products covered by the purchase/sales contract concluded between the
parties and, in general, all the Products manufactured and/or marketed by the
Vendor are products intended for competitive use exclusively in private
spaces. Any use of the Products on motor vehicles intended to be used on
public roads requires prior registration with the competent authorities. By
accepting these Conditions of Sale, the Customer declares to be well aware of
the above circumstances, to expressly accept them and to have understood the
risk involved in violating the precautions indicated above. In any case,
should the Customer violate the precautions regarding the use of the Products
indicated above, by using the Products for a use other than racing, the Vendor
declines any liability for anything that might happen to the Customer for any
reason whatsoever.
| POS. | QT. | COD. | DESCRIZIONE | DESCRIPTION | DIMEN. |
|---|---|---|---|---|---|
| 1 | 1 | YP002231340 | BRACCETTO SX | HANDGUARD ARM LH | |
| 2 | 1 | YP001943010 | VITE SPECIALE | SPECIAL SCREW | |
| 3 | 1 | YC031010813 | GUARNIZIONE OR | O-RING | |
| 4 | 1 | YP001504070 | PERNO | PIN | |
| 5 | 1 | YC053040120 | RONDELLA ELAST. | SPRING WASHER | M6 |
| 6 | 1 | YC013040740 | VITE | SCREW | M6x16 |
LEXAN PART S: DO NOT USE acid or alkaline based degreasers. Use neutral soaps. Wash on a cold bike, never hot. No pressure washer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>