PHILIPS TCARFX, TCARAD Accent Recessed D65 User Guide
- July 19, 2024
- Philips
Table of Contents
MYCREATION
TCARFX, TCARAD
Accent Recessed D65
TCARFX, TCARAD Accent Recessed D65
| Model | Lumen package | Color Temperature [K] |
|---|
TCARFX
TCARAD| 7S| 830 / 840 / PW930 / PW940 / PC930
12S| 830 / 840 / PW930 / PW940 / PC930
17S| 830 / 840 / PW930 / PW940 / PC930
20S| 830 / 840 / PW930 / PW940
Main dimensions in mm
Minimal built-in dimensions
| TYPE | L [mm] | W [mm] | H [mm] | z [mm] |
|---|---|---|---|---|
| TCARFX | 400 | 300 | 100≤ | 1 – 24 |
TCARAD
Installing
TCARAD (Adjustable) positioning
LUMINAIRES MUST BE INSTALLED OUT OF ARM DISTANCE/HEIGHT! THE SPOTHEAD CAN BE
PERCEIVED AS HOT ADJUST THE SPOTHEAD AFTER THE LUMINAIRES IS COOLED DOWN OR
USE HEAT INSULATING GLOVES.
THE LUMINAIRE SHALL BE INSTALLED BY A QUALIFIED ELECTRICIAN AND WIRED
ACCORDANCE WITH THE LATEST IEE ELECTRICAL REGULATIONS OR THE NATIONAL
REQUIREMENTS.
CAUTION: RISK OF ELECTRIC SHOCK. THE LIGHT SOURCE CONTAINED IN THIS
LUMINAIRE IS NON USER REPLACABLE, IT SHALL ONLY BE REPLACED BY THE
MANUFACTURER OR HIS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON.
THE DRIVER SHALL BE ONLY REPLACED BY THE MANUFACTURER OR HIS SERVICE AGENT OR
A SIMILAR QUALIFIED PERSON.
Dismounting
Mounting accessory
http://www.lighting.philips.com/main/systems/themes
/service-tag.html
https://play.google.com/store/apps/details?id=com.philips.servicetag
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control
conductors.
The light source and/or control gear and/or the external flexible cable
contained in this luminaire shall only be replaced by the manufacturer or his
service agent or a similar qualified person.
Storage, installation, use, operation and maintenance of the products needs to
be performed exactly according the instructions in this manual and/or other
instructions as may be provided by us to guarantee safe use of the product
over its entire lifetime. Failure to adhere to these instructions will
invalidate your entitlement to warranty. Bolts with indication of torque
strength on the drawing need to be tightened using a calibrated torque wrench.
Pre-assembledbolts need to be retightened again to the required torque
specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or
label.
© 2024 Signify Holding
All rights reserved. Reproduction in whole or in part is prohibited without
the prior written consent of the copyright owner. The information presented in
this document does not form part of any quotation or contract, is believed to
be accurate and reliable and may be changed without notice. No liability will
be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent- or other
industrial or intellectual property rights.
Signify Holding
The Netherlands
444316028611
583 – 444316028611
2024-07-04
© Signify Holding
All rights reserved
Printed in
Data subject to change without notice
Keep for future reference:
www.philips.com/lighting