TARAMPS T100.1 HF Passive Speaker Instruction Manual

TARAMPS T100.1 HF Passive Speaker

Product Information

Technical Specifications

• Model: T 100.1 HF
• Power: 50W RMS – 100W MUSICALS
• Impedance: 4 or 8 Ohms
• Frequency Response: 80Hz to 22KHz
• Dimensions: 180 mm x 145 mm x 212 mm

Package Content

• Response curves x impedance 4 Ohms
• Response curves x impedance 8 Ohms
• Mounting bracket
• Installation screws and washers

Product Usage Instructions

Mounting Instructions

1. Choose the best location in your box and screw part 1 using the provided screws.
2. Position piece 2 over piece 3 with the toothed washer between them; Insert the fixing screw together with the washers and nut.
3. Fix piece 3 to the wall; Position the set “piece 1 + box” between piece 2 with the toothed washer between them; Insert the fixing screw together with the washers and nut; Adjust the angle as desired and tighten the nuts and bolts.

PASSIVE BOX WITH 1 SPEAKER – 4 OR 8 OHMS

The T 100.1 HF Passive Speaker was designed to achieve excellent precision in audio reproduction. Thanks to its wide frequency response (80Hz to 22KHz), it guarantees accurate and natural audio reproduction throughout its entire operating range.

Technical Specifications

Product dimensions

Package content

• 01 (one) T 100.1 HF acoustic box;
• 01 (one) Fixing support;

Response curves x impedance 4 Ohms

Response curves x impedance 8 Ohms

Mounting bracket

Installation with fixing bracket

1st STEP

Choose the best location in your box and screw part 1.
(Use the 2 screws that come with the support).

2nd STEP

Position piece 2 over piece 3 with the toothed washer between them;
Insert the fixing screw together with the washers as shown in image 2;
Position the nut and lightly tighten it.

• Toothed washer.
• Toothed washer.

3rd STEP

Fix piece 3 to the wall;
Position the set “piece 1 + box” between piece 2 with the toothed washer between them;
Insert the fixing screw together with the washers as shown in image 3;
Position the nut and lightly tighten it;
Adjust the angle as desired and tighten the nuts and bolts, using a wrench mouth or cannon to facilitate tightening.
Attention: Avoid excessive tightening.

NOTE: Features, specifications and aesthetic aspects are subject to change without prior notice.

Manufactured by: TARAMPS ELECTRONICS LTDA – TAX ID: 11.273.485/0001-03 – KM 30 Júlio Budisk Hwy, Da Pereira Neighborhood, Alfredo Marcondes, SP – 19180-000, Brazil – Made in Brazil
+55 18 3266-4050
www.taramps.com.br

FAQ

Q: Can I install the T 100.1 HF Passive Speaker by myself?
A: The installation of this product must be done by a qualified professional for optimal performance and safety.

Q: What is the frequency response range of the T 100.1 HF Passive Speaker?
A: The T 100.1 HF Passive Speaker has a wide frequency response range from 80Hz to 22KHz, ensuring accurate and natural audio reproduction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>