MODE KS1150 Finish Frameless Tile Gas Fireplace User Guide
- June 13, 2024
- MODE
Table of Contents
KS1150 Frameless Finish with Tile
Prolonged unprotected exposure to heat may be detrimental to the appearance or
long term performance of the wall lining.
KS1150 Finish Frameless Tile Gas Fireplace
Notes:
- All dimensions are in mm. DO NOT SCALE OFF THESE DRAWINGS
- This detail is to assist in the installation of a frameless finish to a Mode KS1150 Gas Fireplace. They offer pathways for protection of heat sensitive linings and finishes.
- This detail will use the extended cabinetry trim kit to protect overhanging cladding edges at the opening of the fire.
- Escea recommends when using these finishing methods that 10mm Fibre Cement Sheet is used.
- Use care when grouting tiles to avoid scratching black fireplace reveals.
- Black fireplace reveals must be able to be removed – ensure any adhesive or compound is kept clear.
- This technical sheet must be read in conjunction with the Mode KS1150 Installation Manual, the latest version can be found on our website at www.stokefires.com
GENERAL CONSTRUCTION AND FINISHES SHOWN INDICATIVE ONLY
Contact the ESCEA Architectural Advisory Team for assistance with the
specification of this fire – aa@escea.com
Mode_KS1150_Finish_Frameless.dwg
20 December 2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>