DIGITUS DS-55342 HDMI Extender Set Installation Guide
- July 12, 2024
- DIGITUS
Table of Contents
DIGITUS DS-55342 HDMI Extender Set
Introduction
The DIGITUS HDMI Extender Set enables HDMI signal transmission over a distance of up to 30 m (4K/120Hz, 4:4:4) using CAT 6 or higher cables. Its features also include bi-directional IR transmission, which enables flexible control of the signal source. It is also suitable for wall mounting, and therefore offers flexible installation options.
Technical Features
- HDMI signal transmission (point-to-point) up to 30 m in UHD resolution (4K/120Hz, 4:4:4)
- Bi-directional IR transmission
- Max. resolution: 4K/120Hz (4:4:4)
- Video bandwidth: 32 Gbps
- Supports HDCP 2.3
- Supports High Dynamic Range (HDR)
- HDMI 2.1
- Suitable for wall mounting.
- Supports CAT 6, CAT 6A, CAT 7 network cable.
Package content
- 1x Transmitter unit
- 1x Receiver unit
- 1x IR transmitter
- 1x IR receiver
- 2x Power adapter (12V/1A, 1.2 m)
- 1x QIG
Specification
Transmitter unit connections:
1x HDMI input (4K/120Hz) – Connection signal source
1x RJ45 output – Connection CAT transmission cable
1x IR output – Connection of IR transmitter
1 x IR input – Connection of IR receiver
1x Power adapter input (DC 12V/1A) – Connection for external power adapter
1x Changeover switch resolution (4K/120Hz, EDID pass-through)
1x Reset button
1x Status LED
Receiver unit connections:
1x HDMI output (4K/120Hz) – Connection display
1x RJ45 input – Connection CAT transmission cable
1x IR output – Connection of IR transmitter
1 x IR input – Connection of IR receiver
1x Power adapter input (DC 12V/1A) – Connection for external power adapter
1x Reset button
1x Status LED
Operating temperature| 0-50°
Power consumption| TX: ca. 4W, RX: ca. 3.5W
Housing| Metal
Dimensions (1 unit)| L 8.4 x W 8.2 x H 1.5 cm
Weight (1 unit)| TX:125g RX:125g
Color| Black
Ports and Interfaces
- STD/TV: Select to the STD Mode for 4K120Hz and Pass-through to TV EDID Mode
- RJ45 OUT : UTP Cable Output Connection Port
- Power: Power LED Indicator
- DC 12V: DC 12V In
- IR IN: IR Signal Input Port
- IR OUT: IR Signal Output Port
- HDMI IN: Connect to Input Sources via HDMI Male Input Port
- Reset: Short Click to Reset
- RJ45 IN : UTP Cable Input Connection Port
- HDMI OUT: Connect to Output Displays via HDMI Male Output Port
Connection Diagram
- Sender
- Receiver
- PS5
- UHD-TV
- HDMI Cable
- CAT6 Cable
- IR TX
- IR RX
Troubleshooting
| Problems | Causes | Solutions |
|---|---|---|
| Non-power- connected/all LED off | Maybe the power supply is not connecting | |
| well or used with the wrong power adapter | Please check if the power supply is |
connecting well and the output voltage value is correct as recommended
No sound or sound issues| Maybe the HDMI connection is not well; the audio
format is not supported by the displays; the source player set another port to
output audio| Please check if the HDMI cables are connecting well; if the
audio format is supported by the displays, customers can change to the
supported audio format or the players audio output setting
No picture or picture flicker| Maybe the HDMI cable quality and UTP cable
quality is not good enough or not connecting well| Please check if the HDMI
and UTP connection is well or change another good quality HDMI 2.1 standard
HDMI cable or UTP (CAT6 or better cable is recommended)
Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
Customer Support
info@assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
