Happy House G3MINI LED Wireless Charging Speaker User Manual
- July 14, 2024
- Happy House
Table of Contents
Happy House G3MINI LED Wireless Charging Speaker User Manual
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuming the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different: from t hat to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be
at least 20 cm between the radiator and your body, and fully supported by the
operating and installation configurations of the transmitter and its
antenna(s).
LED wireless charging speaker user manual
G3MINI
1. Wireless charging usage: Insert the charger to automatically turn on
wireless charging
1. Short press and long press to reduce volume
2. Short press to pause/start, long press to turn on/off
3. Short press the previous song and long press to increase the volume
4. Short press to control the light, long press to enter clock setting (short
press pause key to switch cursor), then long press to set alarm clock (short
press pause key to switch cursor)
Technical parameters.
Battery type: Lithium battery (capacity can be found in the outer box)
Main functions: BT TF.USB AUX. Wireless charging. Color lights
Product size: 155 55 160mm
Horn size: 36mm
Horn resistance: 4 Ω
Horn output power: 3W
Wireless charging power: 5W/10W
Power input: DC5V/2A
Key function operation instructions
Power on: Press and hold the power button for two seconds to turn on the
device, and the default light will be warm when turned on
2. wireless function usage:
1. This audio system supports wireless devices with A2DP function. First,
turn on the device, press and hold the M key to enter wireless mode. The blue
light of the wireless indicator light flashes, accompanied by voice prompts.
At this time, the audio system is in a waiting state for pairing and
connection. Only in this state can it pair and connect with the wireless audio
system.
2. Mobile phone connection.
Step 1: Turn on the wireless settings switch in the phone settings and click
on the search device
Step 2: When the available device displays the word G3MINI, it indicates that
the phone has found a paired wireless speaker. Click G3MINI to enter pairing.
After the phone successfully connects to the speaker, a prompt sound will
appear and it will show that it is connected.
3. Lighting usage.
1. G3MINI wireless speaker is equipped with multiple illusory lighting
effects
2. The default warm up effect when the device is turned on, click the M key
to adjust the lighting effect
TF card function usage
Insert the TF card into the card slot, and a corresponding voice prompt will
appear. The product will automatically read the audio files inside the card
and play them. Users can use the speaker+/- buttons to control the volume and
sound.
Safety instructions:
- Do not expose the product to water or damp areas, such as bathrooms.
- Please do not forcefully impact or drop the product to avoid manual damage.
- When not in use for a long time, please turn off the power.
- Warranty and after-sales service: If you have any problems during use, please feel free to contact us, and we will serve every user with care.