Joinlgo Hi3520DV300 Mobile DVR Instructions

: July 11, 2024
: JOINLGO

Table of Contents

Joinlgo Hi3520DV300 Mobile DVR
Product Usage Instructions
Important Security Rules and Prompt
Typical System Topology
MDVR Specification
Installation Precautions
Power Connections
Remote Controller
I/O Interface
Web Client on PC or Mobile(Optional)
FAQ
FCC statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Joinlgo Hi3520DV300 Mobile DVR

Specifications

Operating System: Depends on model
Video Resolution: 1080P, 1080N, 720P, 960H, D1
Storage: HDD/SSD (up to 2TB), SD card (up to 512GB), USB interface
Power Input: 8~32V DC
Working Temperature: -30°C to 65°C

Product Usage Instructions

1. Important Security Rules and Prompt

Please read the following warnings before using the product:

Do not flush water directly to MDVR while cleaning the vehicle.
Avoid placing heavy objects on top of MDVR.
Do not connect irrelevant devices via the power output of MDVR.
Do not open or disassemble the device without professional guidance.
Avoid changing any modules while the device is powered on.

2. Typical System Topology

Refer to the topological graph of the MDVR system for a visual representation.

3. MDVR Specification

Refer to the specifications listed above for detailed information on the MDVR system.

4. Installation Precautions

4.1 Location

Avoid installing MDVR on a recessed surface prone to liquid accumulation.
Avoid installation in areas vulnerable to excessive\ vibration.
Keep away from excessive humidity, moisture, direct sunlight, heat, and electromagnetic interference.

4.2 Power

MDVR supports power supply ranges from DC 9V to 36V.
It is recommended to use DV 12V or DC 24V power supply.
Turn off power before connecting/disconnecting MDVR.
Ensure correct attachment of the MDVR ground cable to the vehicle.
Disconnect MDVR from the power supply when not in use for an extended period.

4.3 Humidity and Temperature

Avoid exposing MDVR to high humidity and extreme temperatures or contact with liquids to prevent electric shock.

4.4 Accessories

P lace MDVR, cameras, wires, and accessories securely to prevent misuse or damage. Install devices in locations that do not hinder vehicle functionality.

Please read this quick manual before using this product and keep it for future reference.

Important Security Rules and Prompt

Please read the warnings before setting up and using this product:

Do not flush water directly to MDVR while cleaning vehicle.
Do not put heavy things on top of MDVR.
Do not connect irrelevant devices via power output of MDVR.
Do not open or disassemble without a professional guide.
Do not change any modules while the device is powered.

Typical System Topology

Topological graph of the MDVR system:

MDVR Specification

Item	Device parameter	Performance

System

Audio & Video

Recording & Playback

| Recording mode| Manual/Alarm

Video bit rate

| Full frame 4096Mbps，

6 classes image quality optional

Audio bit rate| 8KB/s
Storage media| SD card + HDD/SSD storage
Video inquiry| Inquiry by channel/Recording type
Local playback| Playback by file

Firmware upgrading

| ****

Upgrading mode

| Manual/Automatically/Remote

/Emergency Recovery

Upgrading method| USB disk/Wireless network/SD card
Interface| AV input| 4ch (or 8ch) aviation interface
| ****

AV output

| 1ch VGA video output

1ch aviation AV output

---|---|---

Alarm input

| 4 digital inputs

(4 Positive/Negative trigger)

HDD/SSD

| 1 HDD/SSD

(up to 2TB, support hot plug/unplug)

Function extention

| GPS/BD(Optional)| Support
(Optional)| Supports
WIFI(Optional)| 802.11b/g/n, 2. Hz

Others

| Power input| 8~32V DC

Power consumption

| Standby 3mA

Maximum consumption 30W @12V 2.5A @24V 1.25A

Working

temperature

| ****

-30 — 65℃

Storage

| 1080P 1.5G/h/channel 1080N 1.2G/h/channel 720P 1G/h/channel 960H 750M/h/channel

D1 300M/h/channal

Installation Precautions

To ensure the MDVR to run smoothly within the product warranty, please to all requirements and follow the instructions:

Location

Do not install MDVR on a recessed surface where liquids may accumulate or drip down.
Do not install on where is vulnerable to excessive vibration.
Keep away from excessive humidity and moisture, rain and other sources of liquid.
Keep away from direct sunlight and other sources of heat.
Keep away from strong electromagnetic interference.

Power

MDVR supports power supply ranges from DC 9V ~36V. We recommend DV 12V or DC 24V.
Turn off the power before connecting/disconnecting MDVR.
Correctly attach the MDVR ground cable to the vehicle.
Disconnect MDVR from the power supply when it is not in use for an extended period of time.

Humidity and Temperature

The working humidity for MDVR is between 10-95%.
The working temperature is between -30°C (-22°F) and 60°C (140°F)
Do not handle MDVR with wet hands, while standing in water, or while in contact with other sources of liquid, as these can potentially result in an electric shock.

Accessories

MDVR, cameras, wires and other accessories need to be placed at secure spots so that they won’t be misused and/or destroyed by passengers and/or driver. Also, do not install the devices at places that would restrict normal functioning of the vehicle.
MDVR, cameras, wires and other accessories need to be properly installed to prevent damages; and all transportation regulations should be followed to avoid passenger injury.

Maintenance

To clean surface(s) of MDVR, only use cleansers that are approved for electrical device. Do not use unspecified chemicals or household cleaners.

Power Connections

ACC/Timer Mode (Recommend,Default)

ACC Mode:
- Power on the MDVR when the vehicle is powered.
Timer Mode:
- Power on the MDVR constantly and control it by MDVR software.
Delayed Mode:
- Set the delayed time after the engine is off. control it by MDVR software.

Connection:

Connect the ACC Yellow wire to the Vehicle ACC Line;
Connect the PWR+ Red wire to the Vehicle Battery PWR+
Connect the GND Black wire to the Vehicle Battery GND

Keep Power ON Mode

Connection:
- Connect both the ACC Yellow wire and the PWR+ Red wire to
Vehicle Battery PWR+
- Connect the GND Black wire to the Vehicle Battery GND

Note:

MDVR is connected to both the ignition and the battery. it is powered by the battery when the vehicle starts up, and can drain any battery if the ignition is not turned off.
Make sure the volt is 8-24V, High voltage will damage the MDVR.
The Yellow wire ACC must be connected to power on the MDVR.
There is a fuse in case of a short-circuit, Replace it when it has blown

Remote Controller

Note:

Battery Model: CR2025
If you have the monitor, there is another remote control,There are different.
Press 【ENTER】key to enter sub menu.
Press 【abc】on the screen keyboard to switch number\character\letters.

MDVR setup

When Power on, The VGA Monitor will display,You can use a remote control to set the MDVR.

Note:

Click the “APPLY” button to save settings.

Login and Password

There is no Password for USER:ADMIN .PASSWORD: BLANK. You can Press【Login】and Click 【Apply】to enter the OSD menu.

After login, enter the main menu. It includes 8 items: SEARCH, RECORD, BASIC, INFO, VEHICLE, DISPLAY, PASSWORD, EXIT.

Enter 【PASSWORD】to SET the PASSWORD for ADMIN and USER.If you need the PASSWORD for SUPER, please contact the seller.

Note:

Only “Admin” can set “Admin Password” and “User Password”.
NO password for admin user in default. Password: blank.

Basic Settings

Basic Settings menu is used to set items about mdvr system configuration, such as Alarm, Date/Time. Disk, Maintain,Network, System.

Alarm Settings

: Select interface;
: High and low optional; 4~30V volt input is HIGH
: Switch or not when level is triggered;
: Alarm when no disk or does not recognize the disk;
: Alarm when the disk is out of memory;
: Alarm when there is motion detection.

PTZ Settings(Optional)

If you have PTZ Cameras,check the settings if it does not work.

Date and Time Settings

The MDVR has a Rechargeable Battery for RTC.But if the MDVR has powered off for too long time,the date and time may restore factory settings. When the date and time is incorrect, please set them manually

Note:

After modifying the time, click ”Modify Datetime” to take effect

Disk Settings

: Automatically formatted when a new hard disk or SD card is inserted;
: Automatically overwrite the oldest video file when it is full.

Note:

When device shows”HDD ERR”, please enter menu, check the SD/HDD/SSD, and click”STORAGE FORMAT”.

System Maintain

: Click to reset to factory reset all the settings
:Restart the MDVR
:Reserved

Network Setup(Optional)

: Set the server IP address, port

Note:

47.88.8.31 is IP of our free server. When you setup your own server, change the IP to your own server

System Setup

: VGA output display resolution
: Select the corresponding camera type * “SD” stands for analog camera, * “720P” stands for AHD 720P camera, * “1080P” stands for AHD 1080P camera,
: English and Spanish, Others can be customized

Note:

The default setting is for the NTSC 1080P AHD camera. Please set up according to the specifications of your own cameras.

Vehicle Info Settings

Vehicle Settings is used to set items about mdvr function, such as ACC(G-sensor), WiFi., GPS.

Basic Setup

: Set the number of the machine.

Note:

Vehicle No. Is important for remote access, PLEASE DO NOT CHANGE UNLESS USE YOUR OWN SERVER.

ACC Setup

Mdvr has built-in G-sensor. If you turn on the alarm. It will save G-sensor alarm.
After install the MDVR, Click” ADJUST” to the Calibration bench mark.

ON/OFF Setup

<ON/OFF Model>:Ignition Mode / Timing Mode（In the ignition mode, the MDVR will automatically turn on after the car is started, and in the timing mode,the MDVR will be turned on at the time set by the user.）
: OFF/ON. If set to ON, red power wire to battery, yellow power wire to ACC
:1~1440 minutes (Effective after restarting)
:1~1440 minutes (Effective after restarting)

Wireless Setup(Optional)

: When the module cannot be reconnected after disconnection, the module will automatically power off and reset.
APN: Please input according to the SIM card you use.

Note:

APN of T-mobile in UNITED STATES: fast.t-mobile.com
APN of AT&T in UNITED STATES: BROADBAND
APN of VERIZON in UNITED STATES: internet
Please refer to 7.6 if need an IMEI number. Please active the sim card before using it.

Wi-Fi Setup(Optional)

WiFi: Set to STA,not OFF.
: Search for nearby WiFi hotspots.
< Status>: View WiFi connection status
: It can save 5 WiFi hotspots
: Set to AUTO

Note:

WiFi should be STA Mode, not OFF.
The MDVR will automatically connect to the hotspot you saved.
Work with 2. wifi ONLY.
Turn off the firewall in the wifi router.
No special character in the SSID and password of the wifi hotspot.

GPS Setup(Optional)

: Above the set speed, the device will alarm
: Below the set speed, the device will alarm

Display Setup

: Flip the video image horizontally. Restart mdvr to work.
: Flip the video image vertically. Restart mdvr to work.

Record and Playback

Record Settings

: select whether the channel is recording.
: Optional boot recording/timer recording; when setup to timer, you can schedule the time that starts and stops the recording. Also, you can set it to only record alarm videos.

Note:

Low Stream Config is to set the parameter of remote substream

Playback

Record Search: Search, playback, and backup of video files on disk. It can Fast forward and rewind when playback on MDVR.

Note:

Enter File List and select the files, You can play it on the monitor,or back to U-Disk,

System Info

Check the system info,If you need help, please offer the info to the service.

Press the button “Info” on remote control, will be showed the online information.

GPS: YES means to recognize the GPS module;
LNG:11349.71392 E Display longitude, 0.0 means GPS not working
LAT:2236.43040 N Display latitude, 0.0 means GPS not working
: YES means recognize module, : NO means not recognize module
IMEI: to active sim card.
SIM: YES means to recognize the SIM card, SIM: NO means do not recognize the SIM card
ONLINE: YES means networked, ONLINE: NO means not connecting
CMS ONLINE: YES means connected to the server, CMS ONLINE: NO means not connected the server.

I/O Interface

Alarm-2
Alarm-4
Alarm Output
485B
Alarm-1
Alarm-3
GND
485A

There is 4 alarm input,2 alarm output. Alarm input detection are voltage; can be accessed by a variety of vehicle driving status, such as brakes, steering, horn and so on. Brake testing schematic is shown below, when the brake pedal is depressed, MDVR able to detect high or low voltage.

Alarm outputs are voltage output. Drive capability of 200mA, if you want large power devices, must be externally relays. Alarm output photoelectric schematic shown below.

Web Client on PC or Mobile(Optional)

If your MDVR is a network model,and have set a valid wifi or network,you can visit the MDVR system via Webpage, PC client or mobile App. For the webpage, you can visit the below url and login in . http://47.88.8.31/808gps/login.html

In this webpage,you can also download Windows Client or Mobile App.

Note:

Find the Account on the label of MDVR

Password: 000000 (can change on CMSV7 web/APP)
Server: 47.88.8.31

Live view videos on CMSV7 APP(for wifi or 4G MDVR)

FAQ

Q: What is the recommended power supply for the MDVR?

A: The MDVR supports power supply ranges from DC 9V to 36V, with a recommendation of DV 12V or DC 24V for optimal performance.

Can the MDVR be exposed to direct sunlight?

A: It is advised to keep the MDVR away from direct sunlight and sources of heat to prevent damage and ensure proper functioning.

How should I clean the MDVR?

A: Avoid flushing water directly onto the MDVR while cleaning the vehicle. Use a dry or slightly damp cloth for cleaning purposes.

Why the MDVR do not power on?

Please make sure the SD card door is locked. Please make sure the YELLOW ACC wire gets power too. The fuse on the power input wire is burnt out;

Why the MDVR do not power on?

Enter OSD menu via Admin account. Operation->Display-> Check Horizontal Flip

System shows “HDD ERR” after insert a SD card?

It needs to format the SD card when use the SD card first time. Please check the video. If it still shows “HDD ERR” after formatting the SD card, please change to use another SD card. Enter OSD menu via Admin account. Main->Basic-> Disk. Select the SD and Click “Format”.

MDVR turns on and off automatically all the time

Please remove the SD card or change another SD card. Bad SD card will lead to this issue.

How to set up recording resolution?

Please enter menu via Admin account, default password is empty. Main->Record->Resolution (it can set CIF/HD1/D1/960H/720P).

How to connect and use the IO cable?

It supports 4 channel alarm input. Please refer to section 7 I/O interface in this manual.

There are Blank screen of some channels?

This channel is not connected to the video; The camera connected to this channel is damaged or abnormal; Poor contact or damage of the cable connecting this channel;

There is no GPS signal?

GPS antenna is not connected or placed indoor; GPS module is damaged;

Screen shows display but no video at all channels

Please connect only one channel and test all 4 channels. Short circuit in one channel will lead to this issue.

FCC statement

Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different. from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter

RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

ISED Canada Statement:

This device contains license-exempt transmitter (s)/receiver(s) that comply with Innovation, Science and Economic Development Canada ‘s license-exempt RSS(s). Operation is subject to the following two conditions:

this device may not cause interference and
this device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment

RF Exposure Statement

To maintain compliance with IC’s RF Exposure guidelines, This equipment should be. installed and operated with a minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

CE statement

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

Scan the QR Code for more information

Shenzhen JOINLGO Technology Co.， Ltd.