PHILIPS LumiStreet gen2 Street Light Owner’s Manual
- July 15, 2024
- Philips
Table of Contents
Lighting
LumiStreet gen2
BGP291 LED50-1P/740 II DM24P D9 48/60S
LumiStreet gen2 Street Light
LumiStreet gen2 Micro, LED module 24000 lm, 740 neutral white, Safety class
II, Distribution medium 32, Universal for diameter 32 to 76 mm adjustable
Increasing numbers of municipalities are having to upgrade large-scale
conventional street lighting installations with energy efficient LED
technology. But they are having to do this with smaller and smaller budgets.
That’s why the new generation of LumiStreet has been upgraded and designed to
provide a solution to this challenge, it is the ideal solution for performing
point-to-point replacement of conventional lighting. LumiStreet gen2 achieves
this by offering high efficiency, low Total Cost of Ownership, and ease of
installation and maintenance. The ease of installation and maintenance is
enabled by the Philips Service tag. Moreover, the Philips SR (System Ready)
socket makes it future-ready and you can pair this luminaire with lighting
control and software applications such as Interact City.
Product data
General Information
| Lamp family code | LED240 [LED module 24000 lm] |
|---|---|
| Number of gear units | 1 unit |
| Driver included | Yes |
| Light source engine type | LED |
| Product family code | BGP291 [LumiStreet gen2 Micro] |
| Value ladder | Specification |
| Serviceability class | Class A, luminaire is equipped with serviceable parts |
(when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
Light Technical
| Upward light output ratio | 0 |
|---|---|
| Luminous Flux | 4.350 Im |
| Standard tilt angle posttop | 0° |
| Standard tilt angle side entry | 0° |
| Luminous Efficacy (rated) (Nom) | 167 Im/W |
| Correlated Color Temperature (Nom | 4000 K |
| Color rendering index (CRI) | 70 |
| Light source color | 740 neutral white |
| Optical cover type | Flat glass |
| Luminaire light beam spread | 160′ – 4? x 54° |
| Upward light output ratio | 0 |
| --- | --- |
| Luminous Flux | 4.350 Im |
| Standard tilt angle posttop | 0° |
| Standard tilt angle side entry | 0° |
| Luminous Efficacy (rated) (Nom) | 167 Im/W |
| Correlated Color Temperature (Nom | 4000 K |
| Color rendering index (CRI) | 70 |
| Light source color | 740 neutral white |
| Optical cover type | Flat glass |
| Luminaire light beam spread | 160′ – 4? x 54° |
| Optic type outdoor | Distribution medium 32 |
Operating and Electrical
Input Voltage| 220-240 V
Line Frequency| 50 to 60 Hz
Initial CLO power consumption| #NAME?
End CLO power consumption| #NAME?
Inrush current| 18 A
Inrush time| 0.28 ms
Power Consumption| 26 W
Power Factor (Fraction)| 0.97
Connection| 2 Push-in connector 5-pole
Cable|
Number of products on MCB of 16 A
type B| 8
Temperature
Ambient temperature range| -40 to +50 °C
Controls and Dimming
| Dimmable | Yes |
|---|---|
| Driver/power unit/transformer | Power supply unit regulating |
| Control interface | DALI |
| Constant light output | No |
Mechanical and Housing
| Housing Material | Aluminum die cast |
|---|---|
| Reflector material | Polycarbonate |
| Optic material | Polycarbonate |
| Optical cover material | Glass |
| Fixation material | Aluminum |
| Housing Color | Grey |
| Mounting device | Universal for diameter 32 to 76 mm adjustable |
| Optical cover shape | Flat |
| Optical cover finish | Clear |
| Overall length | 520 mm |
| Overall width | 234 mm |
| Overall height | 95 mm |
| Effective projected area | 0.0246 m’ |
| Dimensions (Height x Width x Depth) | 95 x 234 x 520 mm |
Approval and Application
| Ingress protection code | IP66 [Dust penetration-protected, jet-proof] |
|---|---|
| Mech. impact protection code | IK08 [5 J vandal-protected] |
| Surge Protection (Common/ Differential) | Luminaire surge protection level |
until 6 kV
differential mode and 8 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class II
Flammability mark| For mounting on normally flammable surfaces
CE mark| Yes
ENEC mark| ENEC plus mark
Warranty period| 5 years
EU RoHS compliant| Yes
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-7%
Initial chromaticity| (0.381, 0.379) SDCM <5
Power consumption tolerance| +/-10%
Power consumption tolerance| +/-2
Over Time Performance (IEC Compliant)
Control gear failure rate at median useful life 100000 h| 10%
Lumen maintenance at median useful life 50000 h| L98
Lumen maintenance at median useful life 100000 h| L96
Application Conditions
Performance ambient temperature Tq| 25 °C
Maximum dim level| 0% (digital)
Product Data
Order product name| BGP291 LED50-1P/740 II DM24P D9 48/60S
Full product name| BGP291 LED50-1P/740 II DM24P D9 48/60S
Full product code| 8.72017E+14
Order code| 9.10926E+11
Material Nr. (12NC)| 9.10926E+11
Numerator – Quantity Per Pack| 1
Net Weight (Piece)| 4.000 kg
EAN/UPC – Product/Case| 8.72017E+12
Numerator – Packs per outer box| 1
EAN/UPC – Case| 8.72017E+12
LumiStreet gen2
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, July 4 – data subject to change
Documents / Resources
|
PHILIPS LumiStreet gen2 Street
Light
[pdf] Owner's Manual
BGP291 LED50-1P-740 II DM24P D9 48-60S, LumiStreet gen2 Street Light,
LumiStreet gen2, LumiStreet Street Light, LumiStreet Light, Street Light,
LumiStreet, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>