SUNJOM SJ-0004 Bluetooth Earbuds Instruction Manual
- July 10, 2024
- SUNJOM
Table of Contents
SUNJOM SJ-0004 Bluetooth Earbuds
Specifications
- Product Name: ANC Hybrid & ENC sTWS Earphones
- Model Number: X/[/E’ KEEf :X k_
- Features: ANC Hybrid, ENC, True Wireless Stereo (TWS)
Product Usage Instructions
WEARING
Choose the ear tips that fit your ears best.
Charging:
To charge the earphones, connect them to a power source using the provided
charging cable. Make sure to fully charge them before first use.
Fully dry off the earbuds and the USB charging port before charging.
Pairing:
Turn on the earphones and enable Bluetooth on your device. Search for the
earphones in the Bluetooth settings and select them to pair.
POWERING ON & PAIRING
Open the charging case and take the earbuds out of the case. They will automatically power on and enter Bluetooth pairing mode. Select “Revolution” on your device’s Bluetooth list when connecting for the first time.
MANUAL PAIRING
To manually enter Bluetooth pairing mode, please take the earbuds out of the case, then tap and hold the touchpads on both earbuds for 3 seconds at the same time, until the earbuds LED indicators flash blue rapidly.
CONTROLS
- x1, x2, x3, x4: Tap Once, twice, three times, four times
- 3s: Tap and hold for 3 seconds
POWERING OFF
To power off, return the earbuds to the charging case and close it.
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Avoid extreme temperatures.
- Use original or certified cables
- Do not wear the product while charging.
- Do not use any corrosive cleaner or oil to clean.
- Do not use the product outdoors during thunderstorms.
- Keep out of the reach of children. The product contains small parts which may be a choking hazard
- The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- Do not use the product in environments with too high or too low temperatures, and never expose the product to strong sunshine or very wet environments
- Ensure there is no liquid, sweat or water on the charging port when charging
- Refer to your user manual for your earphones’ waterproof level and follow the corresponding instructions.
- For IPX4: Do not expose earphones to dripping or splashing water.
- For IPX4, IPX5, and IPX6: Do not submerge earphones in water.
Hearing Safety
- To avoid hearing damage, do not listen for extended periods at high volume.
- Do not turn the volume so high that you’re unable to hear your surroundings.
- Do not use earphones while driving.
- You should use caution or temporarily discontinue use in potentially hazardous situations.
The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs), and other implants. Always maintain a distance of at least 3.94/10 cm between the product component containing the magnet (earbuds and charging case) and the cardiac pacemaker, implanted defibrillator, or other
Listening to Music:
Once paired, play music or audio on your device, and it will be streamed to
the earphones wirelessly. Adjust the volume using the controls on the
earphones or your connected device.
FCC Statement
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept anyinterference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital devicepursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses, and canadiate radio frequency energy and. f not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interterence- will not occur in a particular installation
If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The highest SAR value reported under this standard during product
certification for use next to the head with the minimum separation distance of
0mm. This transmitter must not be collocated oroperating in conjunction with
any other antenna or transmitter. The following importer is the responsible
party.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, incand any use of such marks by Anker innovations Limited is under license.Other trademarks andtrade names are those of their respective owners.
Notice
CE This product complies with the radio interference requirements of the
Declaration of Conformity
Hereby, LS TECHNOLOGIES LIMITED declares that this product is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available atthe following internet address:
- Maximum output power: 9.0dBm
- Frequency band: 2.4G band (2.402GHz-2.480GHz)
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling Follow localrules and never dispose of the product and rechargeable batteries with normalhousehold waste. Correct disposal of old products and rechargeable batteries helpsprevent negative consequences for the environment and human health. This symbol indicates “separate collection” for all batteries and accumulators. Dangerof explosion if battery is incorrectly replaced. To reduce risk of fire, explosion or leakageof flammable liquid/gas, don’t disassemble, crush, puncture, short external contacts,expose to temperature above 60°C (140°F), sunshine or like, expose to extremely lowair pressure or dispose of in fire or water. Replace only with specified batteries.
High or low extreme temperatures that a battery can be subjected to during use, storage ortransportation:
- During use: maximum 40 C(104°F)
- Storage:-20-45°C(-4-113°F)
- Transportation:5-35°C(41-95°F)
IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receivers) that comply with
InnovationScience and Economic Development Canada’s licence-exempt kSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FAQ
Q: How do I activate the ANC (Active Noise Cancellation) feature?
A: To activate ANC, press and hold a specific button on the earphones until
you hear a confirmation tone. Check the user manual for the exact steps.
Q: How do I ensure a secure fit for the earphones?
A: Experiment with the different ear tip sizes provided to find the one that
fits your ears securely. A proper fit is essential for optimal sound quality
and comfort.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>