Sonoff USB Smart Adapter User Manual
- July 10, 2024
- SonOFF
Table of Contents
Warks with everything
Micro
User manual V1.2 USB Smart Adapter
SONOFF TECHNOLOGIES CO., LTD.
Operation instruction
-
Download eWeLink App
-
Power on
Long press the button for 55 on the device until the Wi-Fi LED indicator quickly flashes and release, then the device enters the pairing mode.
The device will exit the pairing mode if do not operate within 3mins. f you want to enter the pairing mode again, Long press the device button for 55 and release. Long press the device button for 55 again until the WiFi LED indicator Is “flash quickly” -
Add the device
Method 1: Scan the code to add (recommended) Tap”+” and select “Scan” to add the device by scanning the QR code on the device.
Method 2: manual to add
- Setthe device to the pairing mode, and find the Wi-Fi SSID with ITEAD-*** on your mobile phone, and save last 10 digital codes (The digital code is the unique 1D of the device)
- Go back to “eWeLink” App, tap*+”, select “Scan QR code”, then tap the word “Scanning failed. Please enter device ID manually” o the bottom and save the device ID, tap “Next” and wait until the adding is successful.
Specifications
| Model | Micro |
|---|---|
| input | 5V |
| Output | 5V 2.5A |
| Operating systems. | Android and i0S |
| Wi-Fi | IEEE 802.11b/g/n 2.4GHz |
| Working temperature | -10°C~40°C |
| Material | PCVO |
| Dimension | 31×26.5x33mm |
Product Introduction
Wi-Fi LED indicator status instruction
| LED indicator status | Status instruction |
|---|---|
| Blue light flashes quickly | Pairing mode |
| Blue light is always on | Device is connected successfully |
| Blue light flashes quickly once | Unable to find the router |
| Blue light flashes quickly twice | Successfully connect to the router but Wi-Fi |
is not
connected
Blue light flashes quickly three times| Upgrading
Features
Micro is a portable mini USB smart adaptor that makes your USB devices smart. You can remotely turn on/off the connected devices of your home anywhere, schedule it on/off and share it with your family to control together.
Factory Reset
Deleting the device on the eWeLink app indicates you restore it to factory
setting.
Common Problems
Q: Why my device stays “Offline’?
A:The newly added device needs 1 - 2mins to connect Wi-Fi and network. If it stays offline for a long time, please judge these problems by the blue Wi-Fi indicator status: 1. The blue Wi-Fiindicator quickly flashes once per second, which means that the switch failed to connect your Wi-Fi @ Maybe you have entered a wrong Wi-Fi password, @ Maybe there's too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again @ The 5G Wi-Fi network s not supported and only supports the 2.4GHz wireless network. @ Maybe the MAC address filtering is open. Please turn it off If none of the above methods solved the problem, you can open the mobile datanetwork on your phone to create a Wi-Fi hotspot, then add the device again. 2. Blueindicator quickly flashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server. Ensure steady enough network. If double flash occurs frequently, which means you access an unsteady network, not a product problem. If thenetwork is normal, try toturn off the power to restart the switch,
FCC compliance statement
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation s subject o the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance20cm between the radiator & your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transitter.
Note:
This equipment has been tested and found to comply with the limits for a Class
8 digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not ocarina particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SAR Warning
Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste.
Instead, you should protect human health and the environment by handing over
your waste equipment to a designated collection point for the recycling of
waste electrical and electronic equipment, appointed by the government or
local authorities. Correct disposal and recycling will help prevent potential
negative consequences to the environment and human health. Please contact the
installer or local authorities for more information about the location as well
as terms and conditions of such collection points.
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type Micro is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/.
For CE Frequency
EU Operating Frequency Range
Wi-Fi: 802.11 b/g/n20 2412-2472 MHz
802.11 n40: 2422-2462 MHz
EU Output Power
Wi-Fi 2.4G<s20dBm
Shenzhen Sonoff Technologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, shenzhen, GD, China
ZIP code: 518000
Website: sonoff.tech
Service email: support@itead.cc
MADEIN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>