MINELAB PRO-FIND Metal Detector User Guide
- July 10, 2024
- MINELAB
Table of Contents
MINELAB PRO-FIND Metal Detector
Product Specifications
- Detection Area
- LED Flashlight
- Speaker
- Power Button
- Plus (+) Button
- Minus (-) Button
- Battery Compartment
- 9V PP3 Battery
- Battery Cover
- O-ring
Product Usage Instructions
Turning On and Off
To turn on the device, press the Power Button for approximately 0.5 seconds. To turn off the device, press the Power Button for more than 0.5 seconds.
Adjusting Sensitivity
The device offers 5 levels of sensitivity adjustment. Use the Plus (+) and Minus (-) buttons to adjust the sensitivity according to your preference.
Enabling and Disabling Audio
You can enable or disable audio feedback by following the instructions provided in the manual.
Target and Ferrous Audio
The device allows you to enable target audio and ferrous audio features. Follow the instructions to enable or disable these audio modes.
Rapid Re-Tune and Inactive Alarm
Utilize the Rapid Re-Tune feature and manage the inactive alarm settings as needed.
Factory Reset
To perform a factory reset, follow the instructions in the manual which typically involves pressing certain buttons for a specific duration.
PARTS
- Detection Area
- LED Flashlight
- Speaker
- Power Button
- Plus (+) Button
- Minus (–) Button
- Battery Compartment
- 9 V PP3 Battery
- Battery Cap
- O-ring
MAINTENANCE
- Keep the Battery Cap screw threads and O-ring clean.
- Periodically lubricate the O-ring with silicone grease.
Getting Started Guide
Frequently Asked Questions
Q: How do I replace the battery?
A: To replace the battery, follow the steps mentioned in the maintenance section of the manual.
Q: How do I clean the device?
A: Use a clean cloth and mild detergent to clean the device. Avoid using harsh chemicals or abrasive materials.
Q: What should I do if the device is not functioning properly?
A: Check the battery, connections, and settings. If issues persist, refer to the troubleshooting section of the manual or contact customer support.