Pro-Ject T2 Turntable User Guide
- July 10, 2024
- Pro-Ject
Table of Contents
Pro-Ject T2 Turntable
Product Information
Specifications:
- Model: T2
- Manufacturer: Pro-Ject Audio Systems
- Speeds: 45 RPM, 33 RPM
- Warranty: Check the manual for details
Product Usage Instructions
Setup Guide:
- Unpack all items from the accessory bag:
- Single adapter
- Drive belt
- Connect it E cable
- Gauge
- Alignment tool
- Remove the dust cover.
- Remove the turntable from the box.
- Unpack the power supply unit.
- Unpack the glass platter and felt mat from the bottom of the carton.
- Remove the protective cloth.
- Put the drive belt over the subplatter.
- Put the glass platter on the turntable.
- Put the felt mat on the platter.
- Remove tonearm and counterweight protection inlays.
- Remove the red tonearm security tape.
- Connect to your stereo system:
- Connect it E RCA cable to the amplifier
- Power Cable
- Select the playback speed (45 RPM or 33 RPM).
- Have fun with music!
FAQ:
-
Q: What should I do if I encounter issues with my T2 turntable?
A: If you experience any problems, please refer to the user manual for troubleshooting steps. If the issue persists, feel free to contact us for assistance. -
Q: Can I use the T2 turntable for commercial purposes?
A: No, the T2 turntable is intended for domestic use only. Commercial use may void the warranty and is done so at your own risk.
Note:
For more detailed information, please refer to the user manual provided with
the product.
Getting started
-
Make sure to have enough space to unpack your turntable.
-
Always unpack and set up in a clean environment.
-
Please Do NOT throw away the packaging!
If you need service or want to return your product, please send it in the original packaging including all inserts. In case of damage due to alternative packaging, your dealer cannot guarantee a full refund. -
Full manual: www.project-audio.com/en/product/t2.
Unpack
Unpack all items from the accessories bag.
- a) Single adapter
- b) Drive belt
- c) Connect it E cable
- d) Gauge
- e) Alignment tool
Assembling And Using Instruction
- Remove the dust cover
- Remove the turntable from the box.
- Unpack the power supply unit.
- Unpack glass platter and felt mat from the bottom of the carton.
- Remove the protective cloth.
- Put the drive belt over the subplatter.
- Put the glass platter on the turntable.
- Put the felt mat on the platter.
- Remove tonearm and counterweight protection inlays.
- Remove the red tonearm security tape.
- Connect to your stereo system.
- Select the playback speed.
- Have fun with music!
Service
- Should you encounter a problem that you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country.
- Warranty repairs will only be affected if the unit is returned correctly packaged. For this reason, we recommend keeping the original packaging.
- Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the diagrams on the last page of this user guide. Please remove these parts and pack them separately: lid, counterweight, anti-skating weight, and belt.
- Fit the cartridge protection cap and the transport lock for the tonearm tube, before carefully packaging the record player.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons, releases the manufacturer from any liability over and above the lawful rights of the customer.
Warranty: Terms and Conditions
- A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.
- This warranty offer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects your original warranty).
- Neither transportation or any other costs, nor any risk for removal, transportation, and installation of products is covered by this warranty.
- A warranty is only valid for the original owner. It is not transferable.
- To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.
- Warranty must be claimed within two years of purchase from an authorized dealer. After this period, the warranty will expire.
- The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.
A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:
- Deterioration of parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads, drive belts, and cartridges.
- Damages caused by incorrect installation, connection, or packing.
- Damages caused by any use other than the correct use described in the user manual, negligence, modifications, or use of parts that are not made or authorized by Pro-Ject Audio Systems.
- Damages caused by faulty or unsuitable ancillary equipment.
- Damages caused by accidents, lightning, water, fire heat, war, public disturbances, or any other cause beyond the reasonable control of Pro-Ject Audio Systems and its appointed distributors.
- Products where the serial number has been altered, deleted, removed, or made illegible.
- Repairs or modifications that have been executed by an unauthorized person.
Commercial Use
Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This turntable is intended for domestic use only. Using them for business applications is done so at your own risk.
Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright © 2023. All rights reserved.
The information, pictures, and figures were correct at the time of going to press. The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.
- Contains FCC ID: 2AJYB-S1955
Need help
Feel free to contact us. We have experienced partners all over the world. Find your dealer here: www.project-audio.com/en/find-a-dealer/.