Bluedio T-Elf 2 User Manual
- June 2, 2024
- Bluedio
Table of Contents
User Manual
Structural Sketch
Operational Instruction:
Tips Before Using:
Remove the earphone charging insulation sheet from the charging box, and then put the earphones back into the charging box and close it for charging.
Bluetooth pairing:
- Turn off Bluetooth on cellphone firstly.
- Open the charging box and you’ll see LED light on two earphones is flashing.
- Turn on Bluetooth on cellphone to search for “T Elf 2” and dick it to Connect.
Music control:
One dick touch button to control pause/play of music.
Double-dick the right earphone touch button to increase the volume, and three
times click to switch to the next song.
Double-click the left earphone touch button to decrease the volume, and three
times dick to switch to the previous song.
Call control:
One dick touch button to answer/ hangup the call, long press two seconds to
reject the call.
Last redial:
Continuously dick four touch buttons and redial a call.
Voice assistant:
Press the touch button for a second and let go when you hear the prompt.
Face recognition:
When playing the music, remove earphones, then music will automatically stop
playing. Put the earphones back on and the music will resume.
Solutions for the earphones’ malfunction:
Notice: Hearing sound in only one earphone or the other one cannot be connected, please do the following operations on both earphones.
-
Turn off Bluetooth on cellphone.
-
Long press touch button to turn on the left and right earphone separately, and then three times dick on both left earphone and right earphone so two earphones automatically shut down and pairing recording be removed.
3.Put two earphones back into the charging box and close cover. -
Reopen the charging box and wait for LED light on two earphone to flash.
-
The earphone restart and open Bluetooth on cellphone for pairing
Charging instructions:
Earphones Charging:
Put the earphones into the charging box and close cover. Blue light shows on
charging case and it is always on when charging the case. LED light is off
when fully charged.
Box Charging:
Green light shows on charging case and it is always on when charging the case.
LED light is off when fully charged.
Charging Box Red Light Flashing:
Indicating low power, need to be charged.
Technical specifications Bluetooth version: 5.0
Frequency range: 2.4GHz-2.48GHz
Supporting protocols: A2DP, AVRCP, HSP, HFP
Frequency response range: 20Hz-20KHz
Standby time: about 1000 hours
Music / talk time: about 5-6 hours
Charging time: about 1 hour for headphones,about 2 hours for charging box
Input voltage / current: 5V/> 100mA
Output power: 7mW+7mW
Contact us
www.bluedio.com
[email protected]
020-36450093
Bluedio T-Elf 2 User ManualDownload
Questions about your Manual ? Post in the comments!