YENKEE YHP 05 BT True Wireless Earbuds TABOO User Manual

YENKEE YHP 05 BT True Wireless Earbuds TABOO

INSTRUCTION

1. Charging box LED indicator

2. Charging area of wireless charging box

3. USB-C charging connector of the charging box

4. Led earphone indicator [pale blue intermittent – ready to pair)

5. Touch area – control
   RIGHT AND LEFT EARPHONE FUNCTION
   PLAY/ PAUSE – 2x quick touch
   SIRI / Google Assistant – medium touch
   Incoming call – 2x quick touch
   End call – 2x quick touch
   Music / Game mode – 4x quick touch
   Call rejection – medium touch
   Earphones on/off – long touch
   RIGHT EARPHONE FUNCTION
   Volume up – lx slow touch
   Next track – 3x quick touch
   LEFT EARPHONE FUNCTION
   Volume down – lx slow touch
   Previous track – 3x short touch

6. Microphone

7. Earphone charging contacts

   • L Left earphone storage
   • R Right earphone storage

Putting into operation

Before first use, be sure to read the safety instructions contained in this user’s manual carefully. Check that there is no protective film or dirt on the BT earphone contacts. Charge the earphones to the maximum level. The earphones are automatically ready to use after removing from the charging box.

Turning the earphones on – removing them from the box will auto­matically turn them on [by holding the touch area until they turn on). Turning the earphones off- inserting them into the charging box will automatically turn them off [hold the touch area until they turn off).

Caution: To prevent damage to your hearing, before connecting the BT headphones to your mobile phone, make sure that your device’s volume level is always set to a minimum.

Nate: The BT headphones will turn off after a longer period of inacti­vity unless they are paired to another device.

Pairing ycur headphones via Bluetooth
Then search for the Bluetooth earphones name “TABOO” on the devi­ce you want to pair and start the pairing process. If you are requested to enter a pairing code while your device and the BT earphones are pairing, use the following code: “DODO” To cancel the pairing process, disconnect the BT earphones from your mobile device [cancel the Bluetooth pairing].

Note: To ensure a stable Bluetooth connection, make sure that the distance between the BT headphones and your paired device is kept within 10 meters. Depending on the surrounding interference, it is sometimes necessary to keep a shorter distance between the BT head­phones and your paired device.

Note : In case of disconnecting of one headphone signal you can reset the headphone’s BT connection to your device. First, turn the BT head­phones off, then press the multifunction buttons on both headphones and hold them down for about 5 seconds until the LED indication on the headphone starts flashing slowly in white and red. Press the multifunction button on each headphone twice to enable pairing to your device again.

Charging

A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels.
The charging box offers 2 ways to recharge the integrated battery.

1. Connect the USB-C charging cable to the socket of the charging box and then to your charging adapter. The charging box indicator will start to indicate charging.
2. Place the earphone charging box on your wireless charging plate. Place the box in the center of the charging plate so that the most efficient inductive charging occurs. The charging process starts au­tomatically. The charging box indicator will start to indicate charging.

Attention: For charging, use only the original accessories supplied with the appliance. To achieve maximum battery life, it is advisable to start charging the battery only when it is low [10% – 20%]. Charge continuously until fully charged. If the battery life is already very short, the battery life is exhausted and we recommend you con-• tact an authorised service centre for more information.
Recommendation: If your earphones are not to be used for an ex-
tended period of time, we recommend to fully charge the batteries
once every two to three months. We recommend to store the BT earphones and the charging box with the battery charged to prevent irreparable damage to the battery [loss of capacity].

Specification:

• Bluetooth: v5.2
• BT profiles: HSP/HFP/A2□P/AVRCP
• Operating range: <10m
• Charging voltage: DC 5V [Type CJ
• Charging time: , 1.5 h [wired]/, 2.5 h [5W wireless]
• Playback time: , 6 h Speakers diameter 8 mm
• Frequency response: 20Hz – 2DkHz
• Sensitivity: 105±3dBA
• impedance: 320± 10%
• Maximum transmitter power at 2,4GHz – 2,4835GHz: 2,5mW
• Charging case capacity: 320 mAh [Lithium polymer]
• Earphone capacity: 40 mAh [Lithium polymer]
• Charging case dimensions: 60 x 43 x 29 mm
• Charging case weight: 33 g
• Earphone weight: 4 g

Instructions and information regarding the disposal of used packaging materials
Dispose of packaging material at a public waste disposal site.

Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory, or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection paint far as the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states, you may return your products to your local retailer when buying i:quivalEmt new product.

• The correct disposal of this product will help save valuable natural resources and help in preventing the positive and negative impacts an the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection center for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.
• For business entities in the European Union
• If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.
• Disposal in other countries outside the European Union
• If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller. This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.

Changes to the text, design, and technical specifications may occur without prior notice and we reserve the right to make these changes.
Hereby, FAST i’.:R, a.s. declares that the radio equipment type [YHP 058T] is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.yenkee.eu

Manufacturer: FAST CR, a.s.

• U Sanitasu 1621
• 25101 Ricany
• Czech Republic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>