klik KPB10PDW 10000mAh Wireless Power Bank Charger User Manual
- June 3, 2024
- klik
Table of Contents
Model: KPB10PDW
10000mAh Wireless Power Bank Charger
User Manual v1.1
Compatibility
Compatible with Qi-enabled devices* including
| • iPhone 11 Pro/11 | • Samsung Note 10/9/8/5 | • Huawei Mate 30/20 Pro |
|---|---|---|
| • iPhone XS/XS Max/XR | • Sony Xperia XZ3/XZ2 | • Huawei P30 Pro |
| • iPhone X/8/8 Plus | • Google Pixel 4/4 XL/3/3 XL | • LG G8S/G7 ThinQ |
| • Samsung S10/S9/S8/S7 | • Xiaomi Mi 9/Mi Mix 3 | • LG V30+/V40 |
Features
-
Provides 360% extra battery for an average smartphone#
-
Supports 10W wireless fast charging for compatible devices such as Samsung Galaxy Series and more
-
Supports 7.5W Apple wireless fast charging for iPhones with wireless charging
-
Supports 5W standard wireless charging for all Qi enabled devices
-
18W USB-C PD (Power Delivery) port can fast charge an iPhone 8 or later from 0 to 50% in 30 minutes*
-
18W QC 3.0 USB-A ports for fast charging QC 3.0 devices
-
Rechargeable more than 500 times
-
Four LED indicators to show remaining capacity
-
Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
-
Includes 30cm USB-A to USB-C cable
-
Check with device manufacturer for Qi wireless compatibility # 360% extra battery based on an iPhone 8 with 1821mAh battery
To Charge Power Bank
- Using the included USB-A to USB-C cable, connect the USB-A connector to an AC wall adapter and the USB-C connector to the input connector on the wireless power bank charger
- During charging the LED indicators will flash to indicate charging
- When charging is complete the LED indicators will remain on
Wireless Charging Operation
- Place your wireless charging phone on top of the power bank and position the phone so the wireless receiver of the phone is aligned with the wireless transmitter of the power bank
- Press the On/Off button on the side to commence wireless charging
- If your phone does not start charging, move your phone until the correct position is found and your phone starts charging
Power Bank Operation
- To charge a phone or tablet using the 18W USB-C PD fast charge port, use a USB-C to device charging cable
- To charge a phone or tablet using the 18W USB-A QC 3.0 port, use a USB-A to device charging cable
- Charging should commence automatically
- If charging doesn’t start, press the On/Off button to start charging
- If your phone or device uses a USB-C port, then you can also use the included cable to charge your device
To Check Remaining Capacity
- Press On/Off button and LEDs will light to show remaining capacity
- The LEDs will turn off automatically after about 5 seconds
| LED On / Off / Flashing | Remaining Capacity |
|---|---|
| Less than 5`)/0 | |
| 5% t o 25 °A) | |
| 25% to 50`)/0 | |
| 50% to 75`)/0 | |
| 75% to 100 |
Specifications
- Wireless Standard: WPC/Qi (v1.2.4)
- Watt Hour Rating: 37Wh
- Micro USB Input: DC 5V 2A / 9V 2A / 12V 1.5A
- USB-C Input: DC 5V 3A / 9V 2A / 12V 1.5A
- USB-C Output: DC 5V 3A / 9V 2A / 12V 1.5A
- USB-A Output 1 & 2: QC 3.0 DC 5V 3A / 9V 2A / 12V 1.5A
- Total Output: 18W
- Power Bank Charging Time: 6 to 12 hours depending on charger
- Wireless Output: 10W / 7.5W / 5W
- Charging Distance: 3 to 8mm
- Dimensions: 147 x 71 x 15mm
- Weight: 230g
- Certifications: Qi, RCM, RoHS, UN38.3
iPhone is a trademark of Apple Inc., registered in the U.S. and other
countries.
The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium.
Android is a trademark of Google Inc.
www.comsol.com.au
Made in China
Documents / Resources
| klik
KPB10PDW 10000mAh Wireless Power Bank
Charger
[pdf] User Manual
KPB10PDW 10000mAh Wireless Power Bank Charger, KPB10PDW, 10000mAh Wireless
Power Bank Charger, Wireless Power Bank Charger, Power Bank Charger, Bank
Charger, Charger
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>